Research on Torque Characteristics of a Modular Arc-Linear Flux Switching Permanent-Magnet Motor

The modular arc-linear flux switching permanent-magnet motor (MAL-FSPM) used for scanning system is researched in this paper by the finite element method (FEM). The MAL-FSPM combines characteristics of the flux switching permanent-magnet motor and linear motor and can realize the direct driving and limited angular movement. Due to the double salient effect, the cogging torque including slot torque and end torque is very high. In order to reduce the cogging torque, a method of magnetizing the permanent magnet in reverse direction combined with rotor segmentation is proposed. By means of the proposed method, peak-peak cogging torque and load torque ripple are reduced effectively. Besides, the smooth operation range and an average load torque of the motor are also optimized. The effectiveness of the method is verified by both 2D and 3D FE models.

[1]  Bin Li,et al.  Detent Force Reduction of an Arc-Linear Permanent-Magnet Synchronous Motor by Using Compensation Windings , 2017, IEEE Transactions on Industrial Electronics.

[2]  M. Venturini,et al.  PM motors for direct driving optical telescope , 1996 .

[3]  Chris Gerada,et al.  Design Considerations for a Fault-Tolerant Flux-Switching Permanent-Magnet Machine , 2011, IEEE Transactions on Industrial Electronics.

[4]  Z. Zhu,et al.  Winding Configurations and Optimal Stator and Rotor Pole Combination of Flux-Switching PM Brushless AC Machines , 2010, IEEE Transactions on Energy Conversion.

[5]  Z.Q. Zhu,et al.  Analysis and Optimization of Back EMF Waveform of a Flux-Switching Permanent Magnet Motor , 2008, IEEE Transactions on Energy Conversion.

[6]  Alberto Bellini,et al.  Arc Linear Motors for Direct Drive Robots: Galileo Sphere , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[7]  N. Matsui,et al.  High Power Density Design of 6-Slot–8-Pole Hybrid Excitation Flux Switching Machine for Hybrid Electric Vehicles , 2011, IEEE Transactions on Magnetics.

[8]  J.F. Bangura,et al.  Design of high-power density and relatively high-efficiency flux-switching motor , 2006, IEEE Transactions on Energy Conversion.

[9]  Cheng-Tsung Liu,et al.  Design of High Performance Flux Switching PM Machines with Concentrated Windings , 2014, IEEE Transactions on Magnetics.

[10]  Jing Zhao,et al.  Torque Ripple Reduction of a Novel Modular Arc-Linear Flux-Switching Permanent-Magnet Motor with Rotor Step Skewing , 2016 .

[11]  Qiang Tan,et al.  Suppressing the Thrust Ripple of the Permanent Magnet Linear Synchronous Motors With Different Pole Structures by Setting the Modular Primary Structures Differently , 2018, IEEE Transactions on Energy Conversion.

[12]  D. Howe,et al.  Analysis of a Novel Multi-Tooth Flux-Switching PM Brushless AC Machine for High Torque Direct-Drive Applications , 2008, IEEE Transactions on Magnetics.

[13]  Hongyun Jia,et al.  Back-EMF Harmonic Analysis and Fault-Tolerant Control of Flux-Switching Permanent-Magnet Machine With Redundancy , 2011, IEEE Transactions on Industrial Electronics.

[14]  Jing Zhao,et al.  Analysis and Minimization of Detent End Force in Linear Permanent Magnet Synchronous Machines , 2018, IEEE Transactions on Industrial Electronics.

[15]  Jian-Xin Shen,et al.  A New Method for Reduction of Detent Force in Permanent Magnet Flux-Switching Linear Motors , 2009, IEEE Transactions on Magnetics.

[16]  David Gerada,et al.  Suppressing the Thrust Ripple of the Consequent-Pole Permanent Magnet Linear Synchronous Motor by Two-Step Design , 2018, IEEE Access.

[17]  Danna Zhou,et al.  d. , 1934, Microbial pathogenesis.

[18]  Jing Zhao,et al.  A novel cogging torque reduction method for the modular arc-linear flux switching permanent-magnet motor , 2016, 2016 IEEE Conference on Electromagnetic Field Computation (CEFC).

[19]  Bin Li,et al.  Influence of Different Rotor Teeth Shapes on the Performance of Flux Switching Permanent Magnet Machines Used for Electric Vehicles , 2014 .

[20]  Z. Zhu,et al.  Advanced Flux-Switching Permanent Magnet Brushless Machines , 2010, IEEE Transactions on Magnetics.

[21]  Sadegh Vaez-Zadeh,et al.  Reducing Cogging Torque in Flux Switching Motors With Segmented Rotor , 2013, IEEE Transactions on Magnetics.

[22]  Mingyi Wang,et al.  Research on Inductance Unbalance and Thrust Ripple Suppression of Slot-Less Tubular Permanent Magnet Synchronous Linear Motor , 2018, IEEE Access.

[23]  Jiwen Zhao,et al.  Thrust Ripple Reduction in Permanent Magnet Synchronous Linear Motor Based on Electromagnetic Damping-Spring System , 2018, IEEE Transactions on Energy Conversion.

[24]  Feng Xiao,et al.  A C-core linear flux-switching permanent magnet machine with positive additional teeth , 2014, 2014 17th International Conference on Electrical Machines and Systems (ICEMS).

[25]  Jiwen Zhao,et al.  Thrust Ripple Reduction in Permanent Magnet Synchronous Linear Motor Based on Tuned Viscoelastic Damper , 2019, IEEE Transactions on Industrial Electronics.

[26]  Nursyarizal Mohd Nor,et al.  Analysis of Tubular Linear Motors for Different Shapes of Magnets , 2018, IEEE Access.

[27]  Qinfen Lu,et al.  Performance investigation of multi-tooth flux-switching PM linear motor , 2011, 2011 International Conference on Electrical Machines and Systems.

[28]  W. Hua,et al.  Comparison of Complementary and Modular Linear Flux-Switching Motors With Different Mover and Stator Pole Pitch , 2013, IEEE Transactions on Magnetics.

[29]  W. Hua,et al.  Comparison of flux-switching and doubly-salient permanent magnet brushless machines , 2005, 2005 International Conference on Electrical Machines and Systems.