Consistency retention method for CNC machine tool digital twin model

Abstract Computer Numerical Control Machine Tool (CNCMT) Digital Twin (DT) model is a carrier for complex, time-varying, coupled data of CNCMT, which can theoretically provide a time-varying high-fidelity model. However, there are still many difficulties in its implementation process. And the key issue is how to realize the updated DT model with performance attenuation and validate it. In order to solve this problem, a model consistency retention method for CNCMT DT model is studied and proposed in this paper. Firstly, the framework of consistency retention method for DT model is designed including both digital space and physical space. The principles of data management and performance attenuation update in digital space are elaborated. Then, the implementation method for consistency retention of CNCMT DT model is studied in terms of performance attenuation update workflow for wear and other damage separately. Finally, a case study for the establishment and application of high-fidelity test bench DT model that focusing on rolling guide-rail is carried out to show the implementation flow of the proposed method and verify its operability and effectiveness.

[1]  Stephen T. Newman,et al.  Making CNC machine tools more open, interoperable and intelligent - a review of the technologies , 2006, Comput. Ind..

[2]  Tianliang Hu,et al.  Data Construction Method for the Applications of Workshop Digital Twin System , 2020 .

[3]  Andrew Y. C. Nee,et al.  Digital twin driven lean design for computerized numerical control machine tools , 2020 .

[4]  D. Chopp,et al.  Extended finite element method and fast marching method for three-dimensional fatigue crack propagation , 2003 .

[5]  Jaime A. Camelio,et al.  Automated wear characterization for broaching tools based on machine vision systems , 2015 .

[6]  Wentao Mao,et al.  Online detection of bearing incipient fault with semi-supervised architecture and deep feature representation , 2020 .

[7]  S. Michael Spottswood,et al.  Reengineering Aircraft Structural Life Prediction Using a Digital Twin , 2011 .

[8]  G. R. Halford,et al.  Practical implementation of the double linear damage rule and damage curve approach for treating cumulative fatigue damage , 1981 .

[9]  D. Chopp,et al.  Fatigue crack propagation of multiple coplanar cracks with the coupled extended finite element/fast marching method , 2003 .

[10]  Zvi Hashin,et al.  A Reinterpretation of the Palmgren-Miner Rule for Fatigue Life Prediction , 1980 .

[11]  Wim Van Paepegem,et al.  Adaptive finite element simulation of wear evolution in radial sliding bearings , 2012 .

[12]  Grzegorz Świt,et al.  Experimental validation of concrete crack identification and location with acoustic emission method , 2012 .

[13]  Zizi Lu,et al.  Small time scale fatigue crack growth analysis , 2010 .

[14]  Roby Lynn,et al.  Part data integration in the Shop Floor Digital Twin: Mobile and cloud technologies to enable a manufacturing execution system , 2018, Journal of Manufacturing Systems.

[15]  Yi-Zhou Lin,et al.  Structural Damage Detection with Automatic Feature‐Extraction through Deep Learning , 2017, Comput. Aided Civ. Infrastructure Eng..

[16]  Lee Johnson,et al.  A Simulation-Based Digital Twin for Model-Driven Health Monitoring and Predictive Maintenance of an Automotive Braking System , 2017, Modelica.

[17]  Meng Zhang,et al.  Digital Twin Enhanced Dynamic Job-Shop Scheduling , 2020 .

[18]  Jianhua Liu,et al.  Dynamic Rail-wear Inspecting System Based on Machine Vision , 2007, 2007 2nd IEEE Conference on Industrial Electronics and Applications.

[19]  P. Rabier,et al.  Some remarks on damage theory , 1989 .

[20]  Yongli Wei,et al.  Digital twin for CNC machine tool: modeling and using strategy , 2018, Journal of Ambient Intelligence and Humanized Computing.

[21]  S. Mohammadi.  Extended Finite Element Method , 2008 .

[22]  Andrew Kusiak,et al.  Data-driven smart manufacturing , 2018, Journal of Manufacturing Systems.

[23]  Chunlin Zhang,et al.  Crack location identification of rotating rotor systems using operating deflection shape data , 2013 .

[24]  Naksoo Kim,et al.  Prediction of tool wear in the blanking process using updated geometry , 2016 .

[25]  F. Delannay,et al.  Experimental and numerical comparison of void growth models and void coalescence criteria for the prediction of ductile fracture in copper bars , 1998 .

[26]  Andrew Y. C. Nee,et al.  Enabling technologies and tools for digital twin , 2019 .

[27]  Sylvie Pommier,et al.  Time derivative equations for mode I fatigue crack growth in metals , 2005 .

[28]  Qiang Liu,et al.  Digital twin-driven rapid individualised designing of automated flow-shop manufacturing system , 2019, Int. J. Prod. Res..

[29]  Ahmet Can Altunişik,et al.  Automated model updating of multiple cracked cantilever beams for damage detection , 2017 .

[30]  Izzuddin Zaman,et al.  A review on model updating in structural dynamics , 2015 .