High pumping-power fiber combiner for double-cladding fiber lasers and amplifiers

Abstract. A high pumping-power fiber combiner for backward pumping configurations is fabricated and demonstrated by manufacturing process refinement. The pump power handling capability of every pump fiber can extend to 600 W, corresponding to the average pump coupling efficiency of 94.83%. Totally, 2.67-kW output power with the beam quality factor M2 of 1.41 was obtained, using this combiner in the fiber amplifier experimental setup. In addition, the temperature of the splicing region was less than 50.0°C in the designed combiner under the action of circulating cooling water. The experimental results prove that the designed combiner is a promising integrated all-fiber device for multikilowatt continuous-wave fiber laser with excellent beam quality.

[1]  Peter Cheng,et al.  1.2-kW single-mode fiber laser based on 100-W high-brightness pump diodes , 2012, Other Conferences.

[2]  Qirong Xiao,et al.  A Side-Pump Coupler With Refractive Index Valley Configuration for Fiber Lasers and Amplifiers , 2013, Journal of Lightwave Technology.

[3]  John W. Y. Lit,et al.  Transmission properties of a multimode optical-fiber taper , 1985 .

[4]  D. Kracht,et al.  All-Fiber Counter-Propagation Pumped Single Frequency Amplifier Stage With 300-W Output Power , 2012, IEEE Photonics Technology Letters.

[5]  Jörg Neumann,et al.  Pump and signal combiner for bi-directional pumping of all-fiber lasers and amplifiers. , 2012, Optics express.

[6]  Jianqiu Cao,et al.  Method for stripping cladding light in the High power fiber laser , 2013 .

[7]  Guido Perrone,et al.  Architectures and components for high power CW fiber lasers , 2014 .

[8]  Majid Lafouti,et al.  Robust cladding light stripper for high-power fiber lasers using soft metals. , 2014, Applied optics.

[9]  Quan Sheng,et al.  Investigation on high transmission efficiency 7 × 1 pump combiner , 2016 .

[10]  O. Okhotnikov,et al.  Double clad tapered fiber for high power applications. , 2008, Optics express.

[11]  J. Limpert,et al.  Single mode 4.3 kW output power from a diode-pumped Yb-doped fiber amplifier. , 2017, Optics express.

[12]  M. Zervas,et al.  High Power Fiber Lasers: A Review , 2014, IEEE Journal of Selected Topics in Quantum Electronics.

[13]  Guido Perrone,et al.  Fabrication of pump combiners for high-power fiber lasers , 2011, LASE.

[14]  Yi Ma,et al.  The study of the thermally expanded core technique in end-pumped (N+1)×1 type combiner , 2015, International Symposium on High Power Laser Systems and Applications.

[15]  David J. Richardson,et al.  High power fiber lasers: current status and future perspectives [Invited] , 2010 .

[16]  Pavel Peterka,et al.  Experimental demonstration of novel end-pumping method for double-clad fiber devices. , 2006, Optics letters.

[17]  Nigel Holehouse,et al.  High power performance limits of fiber components , 2015, Photonics West - Lasers and Applications in Science and Engineering.

[18]  Jian-jun Wang,et al.  2 kW (2  +  1) GT-wave fiber amplifier , 2016 .

[19]  Qirong Xiao,et al.  High coupling efficiency and low signal light loss (2 + 1) × 1 coupler * , 2015 .

[20]  S. Lacroix,et al.  Refractive index profile of fused-tapered fiber couplers. , 2004, Optics express.

[21]  Mark Shtaif,et al.  Large-mode-area fused-fiber combiners, with nearly lowest-mode brightness conservation. , 2011, Optics letters.

[22]  Wei Zhao,et al.  4.62 kW excellent beam quality laser output with a low-loss Yb/Ce co-doped fiber fabricated by chelate gas phase deposition technique , 2017 .

[23]  V. R. Supradeepa,et al.  Efficient pump combiner's for fiber lasers and amplifiers , 2016, LASE.

[24]  Stefan Nolte,et al.  Fiber lasers and amplifiers: novel avenues to real-world applications of ultrashort lasers , 2004, International Symposium on Laser Precision Microfabrication.

[25]  侯静,et al.  All-fiber 7 × 1 signal combiner for high power fiber lasers , 2015 .

[26]  T. Hawkins,et al.  Large-mode-area fibers operating near single-mode regime. , 2016, Optics express.

[27]  S. Belke,et al.  All-fiber 7x1 signal combiner for incoherent laser beam combining , 2011, LASE.

[28]  Yifeng Yang,et al.  Low beam quality degradation, high-efficiency pump and signal combiner by built-in mode field adapter. , 2017, Applied optics.

[29]  Zhi-gang Han,et al.  High power cladding light stripper using segmented corrosion method: theoretical and experimental studies. , 2017, Optics express.

[30]  Zeev Zalevsky,et al.  Special Section Guest Editorial: Fiber Lasers and Applications , 2015 .

[31]  Jun Zhou,et al.  The crucial fiber components and gain fiber for high power ytterbium-doped fiber laser , 2015, International Conference on Optical Instruments and Technology.

[32]  Pawel Kaczmarek,et al.  (5 + 1) × 1 pump and signal power combiner with 9/80 μm feed-through signal fiber , 2017 .

[33]  Yuri Chamorovskiy,et al.  Mode evolution in long tapered fibers with high tapering ratio. , 2012, Optics express.

[34]  Pavel Peterka,et al.  Mode-field adapter for tapered-fiber-bundle signal and pump combiners. , 2015, Applied optics.

[35]  Zefeng Wang,et al.  High power incoherent beam combining of fiber lasers based on a 7 × 1 all-fiber signal combiner , 2016 .

[36]  Jing Hou,et al.  Mode-field adaptor between large-mode-area fiber and single-mode fiber based on fiber tapering and thermally expanded core technique. , 2014, Applied optics.

[37]  K. Hejaz,et al.  A Novel Method for Stripping Cladding Lights in High Power Fiber Lasers and Amplifiers , 2012, Journal of Lightwave Technology.