Enhanced high temperature strength in near-eutectic Al-8Ce alloy through Y addition by gravity casting

[1]  Chao Chen,et al.  An additively manufactured heat-resistant Al-Ce-Sc-Zr alloy: Microstructure, mechanical properties and thermal stability , 2023, Materials Science and Engineering: A.

[2]  F. Czerwinski.  The Growth of Quaternary Divorced Eutectic in Al–Ce–Si–Mg Alloys , 2022, Metallurgical and Materials Transactions A.

[3]  S. Babu,et al.  Heterogeneous Phase Transformation Pathways in Additively Manufactured Al-Ce-Mn Alloys , 2022, Journal of Alloys and Compounds.

[4]  Xiaopeng Liang,et al.  The microstructure evolution of Al-5Ce alloy prepared by strain-induced melt activation during semi-solid isothermal treatment process , 2022, Materials Letters.

[5]  B. Shalchi Amirkhiz,et al.  Aluminum Cast Alloys Based on the Al–Ce–Si–Mg System: An Influence of Silicon on Crystallization, Phase Composition, and Tensile Properties , 2022, Metallurgical and Materials Transactions A.

[6]  D. Dunand,et al.  Comparing evolution of precipitates and strength upon aging of cast and laser-remelted Al-8Ce-0.2Sc-0.1Zr (wt.%). , 2022, Materials science & engineering. A, Structural materials : properties, microstructure and processing.

[7]  A. Plotkowski,et al.  A creep-resistant additively manufactured Al-Ce-Ni-Mn alloy , 2022, Acta Materialia.

[8]  Zhi-gang Wang,et al.  Beneficial effects of Sc/Zr addition on hypereutectic Al–Ce alloys: Modification of primary phases and precipitation hardening , 2022, Materials Science and Engineering: A.

[9]  A. Plotkowski,et al.  Microstructure and creep properties of cast near-eutectic Al–Ce–Ni alloys , 2021, Materials Science and Engineering: A.

[10]  D. Leonard,et al.  Elevated temperature ductility dip in an additively manufactured Al-Cu-Ce alloy , 2021, Acta Materialia.

[11]  Fu-qin Jiang,et al.  Internal friction and heat resistance of Al, Al–Ce, Al–Ce–Zr and Al–Ce–(Sc)–(Y) aluminum alloys with high strength and high electrical conductivity , 2021 .

[12]  W. Ding,et al.  Microstructure and mechanical properties of high performance die cast Al-8Ce-3Y aluminum alloy containing Al4(Ce,Y) phase , 2021 .

[13]  Haiyan Gao,et al.  Enhanced load transfer and ductility in Al–9Ce alloy through heterogeneous lamellar microstructure design by cold rolling and annealing , 2021, Materials Science and Engineering: A.

[14]  Sheng-wu Guo,et al.  Improving creep resistance of Al-12 wt.% Ce alloy by microalloying with Sc , 2021, Scripta Materialia.

[15]  Xiaoqin Zeng,et al.  Solid solution strengthening mechanism in high pressure die casting Al–Ce–Mg alloys , 2021 .

[16]  F. Czerwinski.  Thermal stability of aluminum–cerium binary alloys containing the Al–Al11Ce3 eutectic , 2021 .

[17]  Yuanwei Sun,et al.  Microstructure and properties of novel Al-Ce-Sc, Al-Ce-Y, Al-Ce-Zr and Al-Ce-Sc-Y alloy conductors processed by die casting, hot extrusion and cold drawing , 2020 .

[18]  B. Shalchi Amirkhiz,et al.  On the Al–Al11Ce3 Eutectic Transformation in Aluminum–Cerium Binary Alloys , 2020, Materials.

[19]  B. McWilliams,et al.  Laser powder bed fusion of Al–10 wt% Ce alloys: microstructure and tensile property , 2020, Journal of Materials Science.

[20]  D. Dunand,et al.  Aging- and creep-resistance of a cast hypoeutectic Al-6.9Ce-9.3Mg (wt.%) alloy , 2020 .

[21]  W. Ding,et al.  Mechanical properties and yield asymmetry of Mg-Y-Zn alloys: Competitive behavior of second phases , 2020, Materials Characterization.

[22]  W. Ding,et al.  Improved Tensile Strength of Al-5Ce Alloy by Permanent Magnet Stirring , 2020, Metallurgical and Materials Transactions A.

[23]  D. Dunand,et al.  Cast near-eutectic Al-12.5 wt.% Ce alloy with high coarsening and creep resistance , 2019, Materials Science and Engineering: A.

[24]  W. Gao,et al.  The varied mechanisms of yttrium (Y) modifying a hypoeutectic Al–Si alloy under conditions of different cooling rates , 2019, Journal of Alloys and Compounds.

[25]  Xiaolei Wu,et al.  Perspective on hetero-deformation induced (HDI) hardening and back stress , 2019, Materials Research Letters.

[26]  D. Dunand,et al.  Strengthening mechanisms in Al Ni Sc alloys containing Al3Ni microfibers and Al3Sc nanoprecipitates , 2019, Acta Materialia.

[27]  T. Xia,et al.  Modification of Hypereutectic Al–20 wt%Si Alloy Based on the Addition of Yttrium and Al–5Ti–1B Modifiers Mixing Melt , 2018, International Journal of Metalcasting.

[28]  Tongyu Liu,et al.  The microstructure and mechanical characterization of Al-30%Mg2Si composite with Y inoculation addition , 2018, Materials Research Express.

[29]  D. Weiss.  Castability and Characteristics of High Cerium Aluminum Alloys , 2017 .

[30]  Yan Chen,et al.  High performance aluminum–cerium alloys for high-temperature applications , 2017 .

[31]  Ryan R. Dehoff,et al.  Evaluation of an Al-Ce alloy for laser additive manufacturing , 2017 .

[32]  Z. Fu,et al.  Effect of trace yttrium addition on the microstructure and tensile properties of recycled Al–7Si–0.3Mg–1.0Fe casting alloys , 2016 .

[33]  R. Ott,et al.  Cerium-Based, Intermetallic-Strengthened Aluminum Casting Alloy: High-Volume Co-product Development , 2016 .

[34]  Xin-bo He,et al.  Effect of (0–40) wt. % Si addition to Al on the thermal conductivity and thermal expansion of diamond/Al composites by pressure infiltration , 2016 .

[35]  Constantinos Soutis,et al.  Recent developments in advanced aircraft aluminium alloys , 2014 .

[36]  J. Hirsch,et al.  Superior light metals by texture engineering: Optimized aluminum and magnesium alloys for automotive applications , 2013 .

[37]  R. Valiev,et al.  Nanostructured aluminium alloys produced by severe plastic deformation: New horizons in development , 2013 .

[38]  Zunjie Wei,et al.  Effects of yttrium and heat treatment on the microstructure and tensile properties of Al–7.5Si–0.5Mg alloy , 2011 .

[39]  D. Seidman,et al.  Precipitation evolution in Al–0.1Sc, Al–0.1Zr and Al–0.1Sc–0.1Zr (at.%) alloys during isochronal aging , 2010 .

[40]  A. Samuel,et al.  Influence of additives on the microstructure and tensile properties of near-eutectic Al–10.8%Si cast alloy , 2009 .

[41]  H. Okamoto.  Al-Y (Aluminum-Yttrium) , 2008 .

[42]  D. Seidman,et al.  Criteria for developing castable, creep-resistant aluminum-based alloys – A review , 2006, International Journal of Materials Research.

[43]  D. Seidman,et al.  Criteria for developing castable, creep-resistant aluminum-based alloys – A review , 2006 .

[44]  L. Arrighi,et al.  The isothermal section at 500 °C of the Al–Cu–Ho ternary system , 2004 .

[45]  D. Seidman,et al.  Effect of Mg addition on the creep and yield behavior of an Al–Sc alloy , 2003 .

[46]  David C. Dunand,et al.  Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys , 2002 .

[47]  H. Okamoto.  Al-Ce (Aluminum-Cerium) , 1998 .

[48]  J. Embury.  Strengthening Mechanisms in AL Alloys - an Overview of Natural Limits and Engineering Possibilities , 1996 .

[49]  P. Voorhees,et al.  Ostwald ripening in concentrated alloys , 1994 .

[50]  M. Grabski,et al.  The Hall–Petch relation in aluminium and its dependence on the grain boundary structure , 1986 .

[51]  F. Czerwinski.  Cerium in aluminum alloys , 2019, Journal of Materials Science.

[52]  F. J. Humphreys,et al.  Strengthening mechanisms in particulate metal matrix composites , 1991 .