A review on optimization techniques used in civil engineering material and structure design

Abstract Optimization of blend extents for materials like cement, contain numerous constituents and are regularly dependent upon a few exhibition, limitation, can be troublesome and tedious errand. Factual trial structure and investigation techniques have been grown explicitly to advance blends. The exhibition of specific materials like cement or mortar changes with change in climatic conditions. Thus, it is important to plan an ideal solid blend as indicated by change in climatic condition. Optimization problem formulation, strategies for enhancement and arrangement methods are displayed. Populace based strategies are likewise clarified. Optimization utilizing imperatives as far as dependability is seen as best choice for enhancing structures with discrete parameters.

[1]  Senay Atabay,et al.  Cost optimization of three-dimensional beamless reinforced concrete shear-wall systems via genetic algorithm , 2009, Expert Syst. Appl..

[2]  José María Moreno-Jiménez,et al.  A systematic review of application of multi-criteria decision analysis for aging-dam management , 2017 .

[3]  Kai Zhang,et al.  Optimizing Traffic Control to Reduce Fuel Consumption and Vehicular Emissions , 2009 .

[4]  B. Munwar Basha,et al.  Optimum design of cantilever sheet pile walls in sandy soils using inverse reliability approach , 2008 .

[5]  Hong Zhang,et al.  Multi‐objective particle swarm optimization for construction time‐cost tradeoff problems , 2010 .

[6]  S. Thomas Ng,et al.  Optimizing Construction Time and Cost Using Ant Colony Optimization Approach , 2008 .

[7]  M. H. Sadr,et al.  Optimization of laminated composite plates for maximum fundamental frequency using Elitist-Genetic algorithm and finite strip method , 2011, Journal of Global Optimization.

[8]  Michele Germani,et al.  A Design Methodology to Support the Optimization of Steel Structures , 2016 .

[9]  Charles V. Camp.  DESIGN OF SPACE TRUSSES USING BIG BANG–BIG CRUNCH OPTIMIZATION , 2007 .

[10]  O. Hasançebi,et al.  Performance evaluation of metaheuristic search techniques in the optimum design of real size pin jointed structures , 2009 .

[11]  R. Nasimi,et al.  Application of artificial bee colony-based neural network in bottom hole pressure prediction in underbalanced drilling , 2011 .

[12]  Tayfun Dede,et al.  Estimates of energy consumption in Turkey using neural networks with the teaching–learning-based optimization algorithm , 2014 .

[13]  Sujatha Srinivasan,et al.  A social intelligent system for multi-objective optimization of classification rules using cultural algorithms , 2012, Computing.

[14]  Ş. Karakaya,et al.  Natural frequency and buckling optimization of laminated hybrid composite plates using genetic algorithm and simulated annealing , 2011 .

[15]  Yue Liu,et al.  An arterial signal optimization model for intersections experiencing queue spillback and lane blockage , 2011 .

[16]  Julián Alcalá,et al.  Design of tall bridge piers by ant colony optimization , 2011 .

[17]  Rainer Storn,et al.  Differential Evolution – A Simple and Efficient Heuristic for global Optimization over Continuous Spaces , 1997, J. Glob. Optim..

[18]  Hongping Zhu,et al.  Improved Particle Swarm Optimization-Based Form-Finding Method for Suspension Bridge Installation Analysis , 2015 .

[19]  M. Tech,et al.  Multi-Objective Optimization of Construction Project Time-Cost-Quality Trade - off Using Differential Evolution Algorithm , 2014 .

[20]  Siamak Talatahari,et al.  Optimal design of skeletal structures via the charged system search algorithm , 2010 .

[21]  Tayfun Dede,et al.  Modeling stream dissolved oxygen concentration using teaching–learning based optimization algorithm , 2015, Environmental Earth Sciences.

[22]  Dervis Karaboga,et al.  The Artificial Bee Colony algorithm in layer optimization for the maximum fundamental frequency of symmetrical laminated composite plates , 2014 .

[23]  Dervis Karaboga,et al.  A powerful and efficient algorithm for numerical function optimization: artificial bee colony (ABC) algorithm , 2007, J. Glob. Optim..

[24]  Henry X. Liu,et al.  SMART-Signal Phase II: Arterial Offset Optimization Using Archived High-Resolution Traffic Signal Data , 2013 .

[25]  Prof.Sable K.S.,et al.  Optimization Of Retaining Wall By Using Optimtool In MATLAB , 2012 .

[26]  Roger Fletcher,et al.  A Rapidly Convergent Descent Method for Minimization , 1963, Comput. J..

[27]  Julián Alcalá,et al.  Design of prestressed concrete precast road bridges with hybrid simulated annealing , 2013 .

[28]  K. Lenin,et al.  A New charged system Search for Solving Optimal Reactive Power Dispatch Problem , 2014 .

[29]  C. M. Reeves,et al.  Function minimization by conjugate gradients , 1964, Comput. J..

[30]  Remon Fayek Aziz,et al.  Smart optimization for mega construction projects using artificial intelligence , 2014 .

[31]  Bibhuti Bhusan Pati,et al.  A review on optimization algorithms and application to wind energy integration to grid , 2015 .

[32]  David A. Roke,et al.  Optimization of retaining wall design using recent swarm intelligence techniques , 2015 .

[33]  Pinar Çivicioglu,et al.  Backtracking Search Optimization Algorithm for numerical optimization problems , 2013, Appl. Math. Comput..

[34]  Joe Naoum-Sawaya,et al.  A Simulation-Optimization Approach for Reducing Background Leakage in Water Systems☆ , 2014 .

[35]  Claudomiro Sales,et al.  A novel unsupervised approach based on a genetic algorithm for structural damage detection in bridges , 2016, Eng. Appl. Artif. Intell..

[36]  R. Venkata Rao,et al.  A multi-objective algorithm for optimization of modern machining processes , 2017, Eng. Appl. Artif. Intell..

[37]  Dan M. Frangopol,et al.  Multi-objective design of post-tensioned concrete road bridges using artificial neural networks , 2017 .

[38]  Tugrul Talaslioglu,et al.  Multiobjective Design Optimization of Grillage Systems according to LRFD-AISC , 2011 .

[39]  Dan M. Frangopol,et al.  Optimization of Life-Cycle Maintenance of Deteriorating Bridges with Respect to Expected Annual System Failure Rate and Expected Cumulative Cost , 2014 .

[40]  Yuanyou Xia,et al.  Design of Reinforced Cantilever Retaining Walls using Heuristic Optimization Algorithms , 2012 .

[41]  Sarita Singla,et al.  Optimization of Reinforced Concrete Retaining Walls of Varying Heights using Relieving Platforms , 2015 .

[42]  Luca Quadrifoglio,et al.  Comparing Ant Colony Optimization and Genetic Algorithm Approaches for Solving Traffic Signal Coordination under Oversaturation Conditions , 2012, Comput. Aided Civ. Infrastructure Eng..

[43]  R. Venkata Rao,et al.  Teaching-learning-based optimization: A novel method for constrained mechanical design optimization problems , 2011, Comput. Aided Des..

[44]  S. Thomas Ng,et al.  An ant colony system based decision support system for construction time-cost optimization , 2012 .

[45]  Xin-She Yang,et al.  Firefly algorithm, stochastic test functions and design optimisation , 2010, Int. J. Bio Inspired Comput..

[46]  Víctor Yepes,et al.  Optimization of high-performance concrete structures by variable neighborhood search , 2013 .

[47]  Mohammad Reza Nikoo,et al.  A novel multi criteria decision making model for optimizing time-cost-quality trade-off problems in construction projects , 2015, Expert Syst. Appl..

[48]  M. Apalak,et al.  Layer optimisation for maximum fundamental frequency of laminated composite plates for different edge conditions , 2008 .

[49]  Dan M. Frangopol,et al.  Sustainability-informed maintenance optimization of highway bridges considering multi-attribute utility and risk attitude , 2015 .

[50]  Dariush Moradinezhad,et al.  Improved and competitive algorithms for large scale multiple resource-constrained project-scheduling problems , 2014 .

[51]  Saeed Hosseinzadeh,et al.  Design optimisation of retaining walls in narrow trenches using both analytical and numerical methods , 2015 .

[52]  Víctor Yepes,et al.  A parametric study of optimum earth-retaining walls by simulated annealing , 2008 .

[53]  Saman Aminbakhsh,et al.  Pareto Front Particle Swarm Optimizer for Discrete Time-Cost Trade-Off Problem , 2017 .

[54]  Ehsan Eshtehardian,et al.  Multi-mode resource-constrained discrete time–cost-resource optimization in project scheduling using non-dominated sorting genetic algorithm , 2013 .

[55]  Yusuf Ayvaz,et al.  Combined size and shape optimization of structures with a new meta-heuristic algorithm , 2015, Appl. Soft Comput..

[56]  Tayfun Dede,et al.  Optimum design of grillage structures to LRFD-AISC with teaching-learning based optimization , 2013 .

[57]  Zong Woo Geem,et al.  A New Heuristic Optimization Algorithm: Harmony Search , 2001, Simul..

[58]  B. Munwar Basha,et al.  Optimum Design of Cantilever Retaining Walls Using Target Reliability Approach , 2008 .

[59]  M. Tech Scholar,et al.  OPTIMIZATION AND IMPROVEMENT IN STABILITY OF COUNTERFORT RETAINING WALL WITH RELIEF SHELF , 2015 .

[60]  Taehoon Hong,et al.  An integrated multi-objective optimization model for solving the construction time-cost trade-off problem , 2015 .

[61]  Saman Aminbakhsh,et al.  Discrete particle swarm optimization method for the large-scale discrete time-cost trade-off problem , 2016, Expert Syst. Appl..

[62]  Gérard J. Poitras,et al.  Optimization of steel floor systems using particle swarm optimization , 2011 .

[63]  Siti Zaiton Mohd Hashim,et al.  Overview of PSO for optimizing process parameters of machining , 2012 .

[64]  M. Kripka,et al.  Structural optimization and proposition of pre-sizing parameters for beams in reinforced concrete buildings , 2013 .

[65]  Önder Halis Bettemir,et al.  Network analysis algorithm for the solution of discrete time-cost trade-off problem , 2017 .

[66]  Yousef Hosseinzadeh,et al.  A Cultural Algorithm for Optimal Design of Truss Structures , 2015 .

[67]  Amjad J. Aref,et al.  A genetic algorithm-based multi-objective optimization for hybrid fiber reinforced polymeric deck and cable system of cable-stayed bridges , 2015, Structural and Multidisciplinary Optimization.