Estimating plot-le v el tree heights with lidar : local filtering with a canopy-height based v ariable window size

In recent years, the use of airborne lidar technology to measure forest biophysical characteristics has been rapidly increasing. This paper discusses processing algorithms for deriving the terrain model and estimating tree heights by using a multiple return, high / density, small-footprint lidar data set. The lidar data were acquired over deciduous, coniferous, and mixed stands of varying age classes and settings typical of the southeastern US. The specific objectives were: (1) to develop and test algorithms to estimate plot level tree height using lidar data, and (2) to investigate how ground measurements can help in the processing phase of lidar data for tree height assessment. The study area is located in the Piedmont physiographic province of Virginia, USA and includes a portion of the Appomattox-Buckingham State Forest (37825?N, 78841?W). Two lidar processing algorithms are discussed*/the first based on single tree crown identification using a variable window size for local filtering, and the second based on the height of all laser pulses within the area covered by the ground truth data. Height estimates resulted from processing lidar data with both algorithms were compared to field measurements obtained with a plot design following the USDA Forest Service Forest Inventory and Analysis (FIA) field data layout. Linear regression was used to develop equations relating lidar-estimated parameters with field inventories for each of the FIA plots. As expected, the maximum height on each plot was predicted with the highest accuracy (R values of 85 and 90%, for the first and the second algorithm, respectively). The variable window size algorithm performed better for predicting heights of dominant and co-dominant trees (R values 84 /85%), with a diameter at breast height (dbh) larger than 12.7 cm (5 in), when compared with the algorithm based on all laser Corresponding author. Address: Department of Forestry, 319 Cheatham Hall, Virginia Tech, Blacksburg, VA 24061, USA E-mail address: spopescu@vt.edu (S.C. Popescu). Computers and Electronics in Agriculture 37 (2002) 71 /95 www.elsevier.com/locate/compag 0168-1699/02/$ see front matter # 2002 Elsevier Science B.V. All rights reserved. PII: S 0 1 6 8 1 6 9 9 ( 0 2 ) 0 0 1 2 1 7 heights (R values 57 /73%). The use of field-based height thresholds when processing lidar data did not bring significant gains in explaining the total variation associated with tree height. The technique of local filtering with a variable window size considers fundamental forest biometrics relationships and overall proved to give better results than the technique of all laser shots. # 2002 Elsevier Science B.V. All rights reserved.

[1]  E. Næsset Estimating timber volume of forest stands using airborne laser scanner data , 1997 .

[2]  W. Cohen,et al.  Lidar remote sensing of forest canopy structure and related biophysical parameters at H.J. Andrews Experimental Forest, Oregon, USA , 1998, IGARSS '98. Sensing and Managing the Environment. 1998 IEEE International Geoscience and Remote Sensing. Symposium Proceedings. (Cat. No.98CH36174).

[3]  J. Means,et al.  Predicting forest stand characteristics with airborne scanning lidar , 2000 .

[4]  R. H. Myers Classical and modern regression with applications , 1986 .

[5]  E. Næsset Determination of mean tree height of forest stands using airborne laser scanner data , 1997 .

[6]  Steen Magnussen,et al.  Recovering Tree Heights from Airborne Laser Scanner Data , 1999, Forest Science.

[7]  W. Cohen,et al.  Surface lidar remote sensing of basal area and biomass in deciduous forests of eastern Maryland, USA , 1999 .

[8]  J. Blair,et al.  The Laser Vegetation Imaging Sensor: a medium-altitude, digitisation-only, airborne laser altimeter for mapping vegetation and topography , 1999 .

[9]  David G. Goodenough,et al.  Comparison of fixed-size and variable-sized windows for the estimation of tree crown position , 1998, IGARSS '98. Sensing and Managing the Environment. 1998 IEEE International Geoscience and Remote Sensing. Symposium Proceedings. (Cat. No.98CH36174).

[10]  W. Krabill,et al.  Using airborne lasers to estimate forest canopy and stand characteristics. , 1988 .

[11]  M. Flood,et al.  Commercial implications of topographic terrain mapping using scanning airborne laser radar , 1997 .

[12]  David J. Harding,et al.  Analysis of laser altimeter waveforms for forested ecosystems of Central Florida , 1997, Defense, Security, and Sensing.

[13]  Jerry C. Ritchie,et al.  Airborne laser altimeter measurements of landscape topography , 1995 .

[14]  K. Kraus,et al.  Determination of terrain models in wooded areas with airborne laser scanner data , 1998 .

[15]  T. D. Clem,et al.  Airborne lidar for profiling of surface topography , 1991 .

[16]  M. Nilsson Estimation of tree heights and stand volume using an airborne lidar system , 1996 .

[17]  K. O. Niemann,et al.  Automated Tree Crown Identification Using Digital Orthophoto Mosaics , 1998 .

[18]  N. Lam Spatial Interpolation Methods: A Review , 1983 .

[19]  L. E. Link,et al.  Airborne laser topographic mapping results , 1984 .

[20]  Donald G. Leckie,et al.  Automated measurements of terrain reflection and height variations using an airborne infrared laser system , 1985 .

[21]  R. Nelson,et al.  Determining forest canopy characteristics using airborne laser data , 1984 .

[22]  David J. Harding,et al.  Laser altimetry waveform measurement of vegetation canopy structure , 1994, Proceedings of IGARSS '94 - 1994 IEEE International Geoscience and Remote Sensing Symposium.

[23]  P. Reiss,et al.  Laser scanning—surveying and mapping agencies are using a new technique for the derivation of digital terrain models , 1999 .

[24]  Peter Axelsson,et al.  Processing of laser scanner data-algorithms and applications , 1999 .

[25]  S. Magnussen,et al.  Derivations of stand heights from airborne laser scanner data with canopy-based quantile estimators , 1998 .

[26]  W. Krabill,et al.  Gross-merchantable timber volume estimation using an airborne lidar system , 1986 .

[27]  F. Ackermann Airborne laser scanning : present status and future expectations , 1999 .

[28]  J. Means Use of Large-Footprint Scanning Airborne Lidar To Estimate Forest Stand Characteristics in the Western Cascades of Oregon , 1999 .

[29]  Ross Nelson,et al.  Estimating forest biomass and volume using airborne laser data , 1988 .