论文信息 - Visualization of failure in a pull-out test of cable bolts using X-ray CT

Visualization of failure in a pull-out test of cable bolts using X-ray CT

Abstract The patterns of failure in a pull-out test are visualized by an X-ray CT scanner to supply the basic data on the bond failure of rock bolts and cable bolts. In the pull-out test, a comparison was made between two types of cable bolts and rock bolts. From the results, it is shown that the microscopic failure mechanism is classified as the different failure mode. Then the supporting effect of rock bolts and cable bolts are discussed.

[1] W. Bawden,et al. THE EFFECT OF ROCK MASS CONFINEMENT ON THE BOND STRENGTH OF FULLY GROUTED CABLE BOLTS , 1992 .

[2] Buddhima Indraratna,et al. Design for grouted rock bolts based on the convergence control method , 1990 .

[3] Peter K. Kaiser,et al. Effect of stress change on the bond strength of fully grouted cables , 1992 .

[4] Dwayne D. Tannant,et al. Rockbolt behaviour under dynamic loading: Field tests and modelling , 1995 .

[5] Peter K. Kaiser,et al. Bond strength of grouted cable bolts , 1992 .

[6] Daniele Peila,et al. RADIAL PASSIVE ROCKBOLTING IN TUNNELLING DESIGN WITH A NEW CONVERGENCE-CONFINEMENT MODEL , 1996 .

[7] Jun Otani,et al. APPLICATION OF X-RAY CT METHOD FOR CHARACTERIZATION OF FAILURE IN SOILS , 2000 .

[8] W. F. Bawden,et al. A CONSTITUTIVE LAW FOR BOND FAILURE OF FULLY-GROUTED CABLE BOLTS USING A MODIFIED HOEK CELL , 1995 .

[9] B. Brady,et al. Analysis of rock reinforcement using finite difference methods , 1988 .