Microstructure Evolution of a Platinum-Modified Nickel-Aluminide Coating During Thermal and Thermo-mechanical Fatigue

[1]  L. Rémy,et al.  Assessment of TBC Oxidation-Induced Degradation Using Compression Tests , 2014, Oxidation of Metals.

[2]  D. Das,et al.  Microstructure and high temperature oxidation behavior of Pt-modified aluminide bond coats on Ni-base superalloys , 2013 .

[3]  L. Rémy,et al.  The respective roles of thermally grown oxide roughness and NiAl coating anisotropy in oxide spallation , 2013 .

[4]  E. Affeldt,et al.  Thickness influence on creep properties for Ni-based superalloy M247LC SX , 2012 .

[5]  L. Rémy,et al.  Thermal cycling behaviour of thermal barrier coating systems based on first- and fourthgeneration Ni-based superalloys , 2012 .

[6]  H. Evans.  Oxidation failure of TBC systems: An assessment of mechanisms , 2011 .

[7]  A. Evans,et al.  A mechanism governing oxidation-assisted low-cycle fatigue of superalloys , 2009 .

[8]  Ernst Affeldt,et al.  Damage evolution during thermo-mechanical fatigue of a coated monocrystalline nickel-base superalloy , 2008 .

[9]  M. Heinzelmann,et al.  Fatigue cracks in a thermal barrier coating system on a superalloy in multiaxial thermomechanical testing , 2008 .

[10]  M. Göken,et al.  Microstructure and local mechanical properties of Pt-modified nickel aluminides on nickel-base superalloys after thermo-mechanical fatigue , 2007 .

[11]  D. Clarke,et al.  Temperature and cycle-time dependence of rumpling in platinum-modified diffusion aluminide coatings , 2007 .

[12]  D. Monceau,et al.  Substrate Effect on the High-Temperature Oxidation Behavior of a Pt-Modified Aluminide Coating. Part I: Influence of the Initial Chemical Composition of the Coating Surface , 2006 .

[13]  P. Moretto,et al.  Investigation of the microstructure of platinum-modified aluminide coatings , 2006 .

[14]  R. Reed,et al.  The effect of TCP morphology on the development of aluminide coated superalloys , 2005 .

[15]  D. Clarke,et al.  On the rumpling mechanism in nickel-aluminide coatings , 2004 .

[16]  K. Badawi,et al.  Microstructure of Pt-modified aluminide coatings on Ni-based superalloys , 2004 .

[17]  Johan Angenete,et al.  Microstructural and microchemical development of simple and Pt-modified aluminide diffusion coatings during long term oxidation at 1050 °C , 2004 .

[18]  A. Evans,et al.  Observations and analysis of the influence of phase transformations on the instability of the thermally grown oxide in a thermal barrier system , 2003 .

[19]  Z. Suo,et al.  Stresses induced in alloys by selective oxidation , 2003 .

[20]  L. Rémy,et al.  Alumina scale growth and degradation modes of a TBC system , 2003 .

[21]  K. Stiller,et al.  A comparative study of two inward grown Pt modified Al diffusion coatings on a single crystal Ni base superalloy , 2001 .

[22]  Philip J. Withers,et al.  Microstructural development in Pt-aluminide coating on CMSX-4 superalloy during TMF , 1998 .

[23]  Woo Y. Lee,et al.  Substrate and bond coat compositions: factors affecting alumina scale adhesion , 1998 .

[24]  P. Wright,et al.  Influence of cyclic strain on life of a PVD TBC , 1998 .

[25]  A. Crosky,et al.  Interdiffusion behaviour in aluminide-coated René 80H at 1150°C , 1997 .

[26]  D. Arrell,et al.  Effect of an aluminide coating on precipitate rafting in superalloys , 1996 .

[27]  P. Moretto,et al.  Thermo-mechanical fatigue degradation of a nickel-aluminide coating on a single-crystal nickel-based alloy , 1996, Journal of Materials Science.

[28]  W. Gale,et al.  Isothermal fatigue of an aluminide-coated single-crystal superalloy: Part II. effects of brittle precracking , 1996 .

[29]  W. Gale,et al.  Fracture behaviour of an aluminide coating on a single crystal nickel base superalloy , 1993 .

[30]  L. Rémy,et al.  Influence of test parameters on the thermal-mechanical fatigue behavior of a superalloy , 1990 .

[31]  M. Farrell.  An investigation of the oxide adhesion and growth characteristics on platinum modified aluminide coatings. , 1986 .

[32]  H. J. Kolkman,et al.  Creep, fatigue and their interaction in coated and uncoated René 80 , 1985 .

[33]  Jack Bresenham,et al.  Algorithm for computer control of a digital plotter , 1965, IBM Syst. J..

[34]  E. W. Hart.  On the role of dislocations in bulk diffusion , 1957 .

[35]  A. Götte,et al.  Metall , 1897 .

[36]  J. Mendez,et al.  High-Temperature Creep Degradation of the AM1/NiAlPt/EBPVD YSZ System , 2013, Metallurgical and Materials Transactions A.

[37]  A. Heuer,et al.  Microstructural evolution of the nickel platinum-aluminide bond coat on electron-beam physical-vapor deposition thermal-barrier coatings during high-temperature service , 2005 .

[38]  Anthony G. Evans,et al.  Mechanisms controlling the durability of thermal barrier coatings , 2001 .

[39]  J. Nesbitt.  Numerical modeling of high-temperature corrosion processes , 1995 .

[40]  L. Rémy,et al.  Behavior of nickel-base superalloy single crystals under thermal-mechanical fatigue , 1994 .

[41]  N. Otsu.  A Threshold Selection Method from Gray-Level Histograms , 1979, IEEE Trans. Syst. Man Cybern..