Characterization of hygroscopic swelling behavior of mold compounds and plastic packages

Hygroscopic swelling behavior of mold compounds is analyzed by a novel experimental procedure using a whole-field displacement technique. Large variation in moisture content at the virtual equilibrium state is observed, while the coefficient of hygroscopic swelling is shown to not vary significantly. An investigation on an actual package is also performed to determine the hygroscopic swelling mismatch strains at the chip/mold compound interface. The results are compared with the thermal expansion mismatch strains at the same interface and reveal much higher hygroscopic swelling mismatch strains. The hygroscopic strains must be considered for reliability assessment when a package is subjected to environments where the relative humidity fluctuates.

[1]  M. Darby,et al.  Moisture absorption by epoxy resins: The reverse thermal effect , 1990 .

[2]  Bongtae Han,et al.  THERMAL STRESSES IN MICROELECTRONICS SUBASSEMBLIES: QUANTITATIVE CHARACTERIZATION USING PHOTOMECHANICS METHODS , 2003 .

[3]  Bongtae Han,et al.  Recent advancements of moiré and microscopic moiré interferometry for thermal deformation analyses of microelectronics devices , 1998 .

[4]  Ephraim Suhir,et al.  Moisture Diffusion in Epoxy Molding Compounds Filled With Particles , 2001 .

[5]  Peter Ifju,et al.  Moiré interferometry for engineering mechanics: Current practices and future developments , 2001 .

[6]  Bongtae Han,et al.  Moiré Methods for Engineering and Science — Moiré Interferometry and Shadow Moiré , 2000 .

[7]  Bongtae Han,et al.  Measurement of the hygroscopic swelling coefficient in mold compounds using moiré interferometry , 2003 .

[8]  P. Ifju,et al.  High Sensitivity Moiré: Experimental Analysis for Mechanics and Materials , 1995 .

[9]  Michael Pecht,et al.  Hygroscopic swelling and sorption characteristics of epoxy molding compounds used in electronic packaging , 2003 .

[10]  Michael J. Adamson,et al.  Thermal expansion and swelling of cured epoxy resin used in graphite/epoxy composite materials , 1980 .

[11]  Ranjan Rajoo,et al.  The mechanics and impact of hygroscopic swelling of polymeric materials in electronic packaging , 2000, 2000 Proceedings. 50th Electronic Components and Technology Conference (Cat. No.00CH37070).

[12]  Anthony J. Rafanelli,et al.  Plastic Encapsulated Microelectronics; Materials, Processes, Quality, Reliability, and Application , 1997 .

[13]  Bongtae Han,et al.  Observing real-time thermal deformations in electronic packaging , 2002 .

[14]  Michael Falk,et al.  State of water in cellulose acetate membranes , 1979 .

[15]  Arthur V. Tobolsky,et al.  Correlations between types of absorbed water molecules and water permeability in swollen polymer membranes , 1974 .