Demodulation scheme for fiber bragg grating sensors based on active control of the spectral response of a wavelength division multiplexer.

We present a closed-loop technique for measuring wavelength shifts associated with fiber Bragg gratings by using a fused biconical wavelength division multiplexer (WDM). The spectral response of the WDM is actively tuned by stretching of the coupling region to maintain a fixed coupling ratio at the reflected Bragg wavelength. The closed-loop operation allows sensitivities usually associated with a highly selective WDM to be obtained without compromising the measurement range. A simple theoretical model is presented together with experimental results for temperature and strain measurements.

[1]  S. Lacroix,et al.  Analyse d'un coupleur bidirectionnel a fibres optiques monomodes fusionnees. , 1983, Applied optics.

[2]  Raymond M. Measures,et al.  Active wavelength demodulation of a Bragg grating fibre optic strain sensor using a quantum well electroabsorption filtering detector , 1996 .

[3]  Jose Luis Santos,et al.  All-fibre interrogation technique for fibre Bragg sensors using a biconical fibre filter , 1996 .

[4]  Jose Luis Santos,et al.  Demodulation scheme for fibre Bragg sensors based on source spectral characteristics , 1996 .

[5]  L. Reekie,et al.  Novel interrogating system for fibre Bragg grating sensors using an acousto-optic tunable filter , 1993 .

[6]  L. Falco,et al.  Switching characteristics of a piezoelectrical actuated evanescent-wave directional coupler , 1987 .

[7]  K. Liu,et al.  Practical fiber-optic Bragg grating strain gauge system. , 1993, Applied optics.

[8]  Michael A. Davis,et al.  Fiber grating sensors , 1997 .

[9]  T. Birks.  Twist-induced tuning in tapered fiber couplers. , 1989, Applied optics.

[10]  Eric Udd,et al.  Development of a three-axis strain and temperature fiber optic grating sensor , 1997, Smart Structures.

[11]  A. Kersey,et al.  Multiplexed fiber Bragg grating strain-sensor system with a fiber Fabry - Perot wavelength filter. , 1993, Optics letters.

[12]  Timothy A. Birks,et al.  Control of optical fibre taper shape , 1991 .

[13]  C. D. Hussey,et al.  Modelling fused single-mode-fibre couplers , 1985 .

[14]  D. Jackson,et al.  Simple multiplexing scheme for a fiber-optic grating sensor network. , 1993 .

[15]  Alan D. Kersey,et al.  All-fibre Bragg grating strain-sensor demodulation technique using a wavelength division coupler , 1994 .

[16]  M. Kawachi,et al.  A single-mode-fiber coupler with a variable coupling ratio , 1983, Journal of Lightwave Technology.

[17]  D C Johnson,et al.  Power transfer in fused biconical-taper single-mode fiber couplers: dependence on external refractive index. , 1985, Applied optics.

[18]  John D. Love,et al.  Quantifying loss minimisation in single-mode fibre tapers , 1986 .

[19]  K. W. Benoist,et al.  Fused coupler switch using a thermo-optic cladding , 1988 .

[20]  A. D. Kersey,et al.  Fiber Optic Bragg Grating Strain Sensor with Direct Reflectometric Interrogation , 1996 .

[21]  K. Hill,et al.  Fiber Bragg grating technology fundamentals and overview , 1997 .

[22]  H. J. Shaw,et al.  Analysis of a tunable single mode optical fiber coupler , 1982, IEEE Journal of Quantum Electronics.

[23]  Raymond M. Measures,et al.  A structurally integrated Bragg grating laser sensing system for a carbon fiber prestressed concrete highway bridge , 1995 .

[24]  J. S. Sirkis,et al.  Simultaneously measuring temperature and strain using optical fiber microcavities , 1997 .

[25]  J. E. Townsend,et al.  Use of highly overcoupled couplers to detect shifts in Bragg wavelength , 1995 .