Acrylic acid plasma polymerized poly(3-hydroxybutyrate) membranes for methanol/MTBE separation by pervaporation

Abstract Plasma polymerized acrylic acid (AA) thin films on poly(3-hydroxybutyrate) (PHB) membranes were evaluated as composite membranes for methanol/methyl tert -butyl ether (MTBE) separation by pervaporation (PV). Composite membranes were prepared in an inductively coupled radiofrequency plasma reactor. Experiments were performed at different powers (7.2 to 29.2 W) and pressures, using pure AA monomer, as well as AA/air and AA/argon mixtures. Depositions chemical characteristics were determined through FTIR spectroscopy, hydrophilic character through contact angle measurements, and SEM images were also taken to analyze surface morphology. In PV measurements, membranes were methanol selective; the separation factor exceeded that of pure PHB membranes in all cases. Fluxes were lower than the original membrane but the performance separation index (PSI) was always higher. Results presented in terms of permeability were between 660 and 4045 barrer for methanol, while for MTBE they were markedly lower, between 10.5 and 57.7 barrer. These large differences in permeabilities caused high selectivities which ranged from 24 to 79.

[1]  Q. Zhang,et al.  Fluorene-containing poly (arylene ether sulfone) block copolymers: Synthesis, characterization and application , 2014 .

[2]  G. Popa,et al.  Properties of the acrylic acid polymers obtained by atmospheric pressure plasma polymerization , 2009 .

[3]  Jie-rong Chen,et al.  Studies on surface graft polymerization of acrylic acid onto PTFE film by remote argon plasma initiation , 2007 .

[4]  A. Lai,et al.  [Cu2(bdc)2(bpy)]n/SPES-C mixed matrix membranes for separation of methanol/methyl tert-butyl ether mixtures , 2014 .

[5]  Q. Zhang,et al.  Facile preparation of homogeneous polyelectrolyte complex membranes for separation of methanol/methyl tert-butyl ether mixtures , 2013 .

[6]  A. C. Habert,et al.  Surface modification of polyurethane membranes using acrylic acid vapour plasma and its effects on the pervaporation processes , 2007 .

[7]  Koji Nakanishi,et al.  Infrared Absorption Spectroscopy , 1977 .

[8]  E. Drioli,et al.  Pervaporation separation of MeOH/MTBE mixtures with modified PEEK membrane: Effect of operating cond , 2011 .

[9]  M. Khayet,et al.  Analysis of the membrane thickness effect on the pervaporation separation of methanol/methyl tertiary butyl ether mixtures , 2005 .

[10]  Y. B. Lin,et al.  Wettability improvement of bacterial polyhydroxyalkanoates via ion implantation , 2000 .

[11]  P. Claesson,et al.  Structure and surface properties of plasma polymerized acrylic acid layers , 1990 .

[12]  Q. Zhang,et al.  Pervaporation of water–ethanol and methanol–MTBE mixtures using poly (vinyl alcohol)/cellulose acetate blended membranes , 2013 .

[13]  J. Gmehling,et al.  Vapor–liquid equilibria and excess properties for methyl tert-butyl ether (MTBE) containing binary systems , 2002 .

[14]  I. Kumakiri,et al.  NaY zeolite membranes with high performance prepared by a variable-temperature synthesis , 2013 .

[15]  U. Vohrer,et al.  Plasma functionalization of polypropylene with acrylic acid , 2003 .

[16]  W. Kujawski,et al.  Polyamide-6 based pervaporation membranes for organic–organic separation , 2013 .

[17]  B. Smitha,et al.  Pervaporation‐Based Separation of Methanol/MTBE Mixtures—A Review , 2005 .

[18]  N. Inagaki.  Plasma Surface Modification and Plasma Polymerization , 1996 .

[19]  S. Ray,et al.  Synthesis of highly methanol selective membranes for separation of methyl tertiary butyl ether (MTBE)–methanol mixtures by pervaporation , 2006 .

[20]  P. Favia,et al.  Plasma deposited acrylic acid coatings: Surface characterization and attachment of 3T3 murine fibroblast cell lines , 2005 .

[21]  Masa-aki Suzuki,et al.  Characteristics of polyimide-based composite membranes fabricated by low-temperature plasma polymerization , 2008 .

[22]  A. M. El-hadi,et al.  Correlation between degree of crystallinity, morphology, glass temperature, mechanical properties and biodegradation of poly (3-hydroxyalkanoate) PHAs and their blends , 2002 .

[23]  Mercedes Villegas,et al.  Sorption and pervaporation of methanol/water mixtures with poly(3-hydroxybutyrate) membranes , 2015 .

[24]  E. Drioli,et al.  Pervaporation separation of methanol/methyl tert‐butyl ether with poly(lactic acid) membranes , 2010 .

[25]  J. M. Henis,et al.  Composite Hollow Fiber Membranes for Gas Separation: The Resistance Model Approach , 1981 .

[26]  P. Favia,et al.  Stable plasma-deposited acrylic acid surfaces for cell culture applications. , 2005, Biomaterials.

[27]  A. Mas,et al.  Membranes en PHB, P(HB-co-9% HV), P(HB-co-22% HV) pour la microfiltration ou la pervaporation proprietes filtrantes et etat de surface , 1996 .

[28]  P. Dubruel,et al.  Stability study of polyacrylic acid films plasma-polymerized on polypropylene substrates at medium pressure , 2010 .

[29]  M. Alexander,et al.  Experimental evidence of a relationship between monomer plasma residence time and carboxyl group retention in acrylic acid plasma polymers , 2003 .

[30]  R. Jafari,et al.  Stable plasma polymerized acrylic acid coating deposited on polyethylene (PE) films in a low frequency discharge (70 kHz) , 2006 .

[31]  H. Pahlavanzadeh,et al.  Self-assembled polyelectrolyte surfactant nanocomposite membranes for pervaporation separation of MeOH/MTBE , 2014 .

[32]  A. Zhu,et al.  Pervaporation separation of methanol/methyl tert-butyl ether mixtures using polyarylethersulfone with cardo membranes , 2013 .

[33]  G. Luo,et al.  Preparation of cellulose acetate membrane filled with metal oxide particles for the pervaporation separation of methanol/methyl tert-butyl ether mixtures , 2009 .

[34]  A. C. Habert,et al.  Sorption and pervaporation with poly(3-hydroxybutyrate) membranes: methanol/methyl tert-butyl ether , 2011 .

[35]  Sundergopal Sridhar,et al.  Separation of organic–organic mixtures by pervaporation—a review , 2004 .

[36]  F. Shi.  Recent advances in polymer thin films prepared by plasma polymerization Synthesis, structural characterization, properties and applications , 1996 .

[37]  Robert Y. M. Huang,et al.  Resistance model approach to asymmetric polyetherimide membranes for pervaporation of isopropanol/water mixtures , 1993 .

[38]  P. Favia,et al.  Water resistant ethylene/acrylic acid plasma-deposited coatings , 2011 .

[39]  N. Gomathi,et al.  RF plasma-treated polymers for biomedical applications , 2008 .

[40]  T. Mohammadi,et al.  Effect of operating conditions on pervaporation of methanol/methyl tert-butyl ether mixtures , 2008 .

[41]  P. Favia,et al.  Functionalization of Biomedical Polymers by Means of Plasma Processes: Plasma Treated Polymers with Limited Hydrophobic Recovery and PE-CVD of -COOH Functional Coatings. , 2002 .

[42]  Xiongfei Zhang,et al.  Cellulose acetate–poly(N-vinyl-2-pyrrolidone) blend membrane for pervaporation separation of methanol/MTBE mixtures , 2008 .

[43]  K. Wilson,et al.  An XPS study of pulsed plasma polymerised allyl alcohol film growth on polyurethane , 2006 .

[44]  Q. Zhang,et al.  Polyarylethersulfone with cardo/poly (vinyl pyrrolidone) blend membrane for pervaporation of methanol/methyl tert-butyl ether mixtures , 2013 .

[45]  Zhongyi Jiang,et al.  HZSM5-filled cellulose acetate membranes for pervaporation separation of methanol/MTBE mixtures , 2008 .