Adaptive Control of Hydraulic Actuators With LuGre Model-Based Friction Compensation

This paper concerns high-accuracy tracking control for hydraulic actuators with nonlinear friction compensation. Typically, LuGre model-based friction compensation has been widely employed in sundry industrial servomechanisms. However, due to the piecewise continuous property, it is difficult to be integrated with backstepping design, which needs the time derivation of the employed friction model. Hence, nonlinear model-based hydraulic control rarely sets foot in friction compensation with nondifferentiable friction models, such as LuGre model, Stribeck effects, although they can give excellent friction description and prediction. In this paper, a novel continuously differentiable nonlinear friction model is first derived by modifying the traditional piecewise continuous LuGre model, then an adaptive backstepping controller is proposed for precise tracking control of hydraulic systems to handle parametric uncertainties along with nonlinear friction compensation. In the formulated nonlinear hydraulic system model, friction parameters, servovalve null shift, and orifice-type internal leakage are all uniformly considered in the proposed controller. The controller theoretically guarantees asymptotic tracking performance in the presence of parametric uncertainties, and the robustness against unconsidered dynamics, as well as external disturbances, is also ensured via Lyapunov analysis. The effectiveness of the proposed controller is demonstrated via comparative experimental results.

[1]  Li Xu,et al.  Adaptive robust control of mechanical systems with nonlinear dynamic friction compensation , 2000, Proceedings of the 2000 American Control Conference. ACC (IEEE Cat. No.00CH36334).

[2]  Max Donath,et al.  Dynamic feedback linearization for electrohydraulically actuated control systems , 1995 .

[3]  Cheng Guan,et al.  Adaptive sliding mode control of electro-hydraulic system with nonlinear unknown parameters , 2008 .

[4]  Junji Hirai,et al.  Development of a Biofeedback Therapeutic-Exercise-Supporting Manipulator , 2009, IEEE Transactions on Industrial Electronics.

[5]  Francis Labrique,et al.  Efficient Control of a Piezoelectric Linear Actuator Embedded Into a Servo-Valve for Aeronautic Applications , 2012, IEEE Transactions on Industrial Electronics.

[6]  Liang Yan,et al.  High-Accuracy Tracking Control of Hydraulic Rotary Actuators With Modeling Uncertainties , 2014, IEEE/ASME Transactions on Mechatronics.

[7]  M. Saad,et al.  Identification and Real-Time Control of an Electrohydraulic Servo System Based on Nonlinear Backstepping , 2007, IEEE/ASME Transactions on Mechatronics.

[8]  Guofang Gong,et al.  The Development of a High-Speed Segment Erecting System for Shield Tunneling Machine , 2013, IEEE/ASME Transactions on Mechatronics.

[9]  Zongxia Jiao,et al.  Friction compensation for low velocity control of hydraulic flight motion simulator: A simple adaptive robust approach , 2013 .

[10]  Li Xu,et al.  Adaptive robust control of mechanical systems with non-linear dynamic friction compensation , 2008, Int. J. Control.

[11]  Takao Nishiumi,et al.  Hydraulic Control Systems: Theory And Practice , 2016 .

[12]  Jorge L. Martínez,et al.  Automation of the Arm-Aided Climbing Maneuver for Tracked Mobile Manipulators , 2014, IEEE Transactions on Industrial Electronics.

[13]  Ioannis Kanellakopoulos,et al.  Adaptive nonlinear friction compensation with parametric uncertainties , 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).

[14]  W.E. Dixon,et al.  A new continuously differentiable friction model for control systems design , 2005, Proceedings, 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics..

[15]  Jianbin Qiu,et al.  A Combined Adaptive Neural Network and Nonlinear Model Predictive Control for Multirate Networked Industrial Process Control , 2016, IEEE Transactions on Neural Networks and Learning Systems.

[16]  Carlos Canudas de Wit,et al.  A new model for control of systems with friction , 1995, IEEE Trans. Autom. Control..

[17]  George T.-C. Chiu,et al.  Adaptive robust motion control of single-rod hydraulic actuators: Theory and experiments , 1999, Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).

[18]  Carlos Canudas de Wit,et al.  A survey of models, analysis tools and compensation methods for the control of machines with friction , 1994, Autom..

[19]  Zongxia Jiao,et al.  RISE-Based Precision Motion Control of DC Motors With Continuous Friction Compensation , 2014, IEEE Transactions on Industrial Electronics.

[20]  D. Mayne Nonlinear and Adaptive Control Design [Book Review] , 1996, IEEE Transactions on Automatic Control.

[21]  Bin Yao,et al.  Energy-Saving Adaptive Robust Control of a Hydraulic Manipulator Using Five Cartridge Valves With an Accumulator , 2014, IEEE Transactions on Industrial Electronics.

[22]  Huijun Gao,et al.  Adaptive Robust Vibration Control of Full-Car Active Suspensions With Electrohydraulic Actuators , 2013, IEEE Transactions on Control Systems Technology.

[23]  Carlos Canudas-de-Wit,et al.  Friction compensation for an industrial hydraulic robot , 1999 .

[24]  Huijun Gao,et al.  Saturated Adaptive Robust Control for Active Suspension Systems , 2013, IEEE Transactions on Industrial Electronics.

[25]  Zongxia Jiao,et al.  Extended-State-Observer-Based Output Feedback Nonlinear Robust Control of Hydraulic Systems With Backstepping , 2014, IEEE Transactions on Industrial Electronics.

[26]  Minghui Huang,et al.  System-Decomposition-Based Multilevel Control for Hydraulic Press Machine , 2012, IEEE Transactions on Industrial Electronics.

[27]  Motohiro Kawafuku,et al.  Practical Controller Design of Hybrid Experimental System for Seismic Tests , 2009, IEEE Transactions on Industrial Electronics.

[28]  Elizabeth A. Croft,et al.  The reduction of stick-slip friction in hydraulic actuators , 2003 .

[29]  焦宗夏,et al.  A practical nonlinear adaptive control of hydraulic servomechanisms with periodic-like disturbances , 2015 .