Porosity estimation method by X-ray computed tomography

In X-ray computed tomography imaging, the approaches used to determine the porosity of the rock from a single computed tomography scan are based on image segmentation techniques. When these techniques are applied to the same data, different results emerge and a threshold is needed at some level of the process. Consequently, the implication is that there is an uncertainty in the porosity measurement. Because of these sensibilities, a new method, called here the grey level method, is developed avoiding the use of these techniques. Considering the computed tomography image as a surface, the volumes required in porosity estimation are obtained by means of integrating this surface with simple operations applied to the image histogram. A porosity distribution which can reflect the properties of the studied rocks is developed given the value of the estimated porosity. The method is compared to two segmentation methods and is evaluated by a conventional one. A close agreement with the conventional method is found.

[1]  K. Mogensen,et al.  Studies of waterflooding in low-permeable chalk by use of X-ray CT scanning , 2001 .

[2]  Arturo A. Keller,et al.  High resolution, non-destructive measurement and characterization of fracture apertures , 1998 .

[3]  Martine Wevers,et al.  Towards 3-D petrography: application of microfocus computer tomography in geological science , 2001 .

[4]  Adrian Sheppard,et al.  Techniques for image enhancement and segmentation of tomographic images of porous materials , 2004 .

[5]  Antonio Pietrosanto,et al.  Standard uncertainty evaluation in image-based measurements , 2004 .

[6]  M. Wevers,et al.  Quantitative analysis of reservoir rocks by microfocus X-ray computerised tomography , 2000 .

[7]  Jean Francois Delerue.  Segmentation 3d, application a l'extraction de reseaux de pores et a la caracterisation hydrodynamique des sols , 2001 .

[8]  S. Akin,et al.  A novel method of porosity measurement utilizing computerized tomography , 1996 .

[9]  Jim R. Parker,et al.  Algorithms for image processing and computer vision , 1996 .

[10]  R. Ketcham,et al.  Acquisition, optimization and interpretation of X-ray computed tomographic imagery: applications to the geosciences , 2001 .

[11]  Zeyun Yu,et al.  New algorithms in 3D image analysis and their application to the measurement of a spatialized pore size distribution in soils , 1999 .

[12]  E. M. Withjack,et al.  Computed tomography for rock-property determination and fluid-flow visualization , 1988 .

[13]  David D. Pollard,et al.  How to calculate normal curvatures of sampled geological surfaces , 2003 .

[14]  Antonio Pietrosanto,et al.  Uncertainty characterization in image-based measurements: a preliminary discussion , 2000, IEEE Trans. Instrum. Meas..

[15]  W. B. Lindquist,et al.  Investigating 3D geometry of porous media from high resolution images , 1999 .

[16]  J. C. Muccino,et al.  Image optimization and analysis of synchrotron X-ray computed microtomography (CμT) data , 2003 .

[17]  Edith Perrier,et al.  DXSoil, a library for 3D image analysis in soil science , 2002 .

[18]  W. Brent Lindquist,et al.  Image Thresholding by Indicator Kriging , 1999, IEEE Trans. Pattern Anal. Mach. Intell..

[19]  Benoit M. Dawant,et al.  Neural-network-based segmentation of multi-modal medical images: a comparative and prospective study , 1993, IEEE Trans. Medical Imaging.

[20]  E. J. Peters,et al.  Characterization of heterogeneities in permeable media with computed tomography imaging , 1992 .

[21]  C. J. Gantzer,et al.  Computed tomographic measurement of macroporosity in chisel-disk and no-tillage seedbeds , 2002 .

[22]  R. A. Johns,et al.  Nondestructive measurements of fracture aperture in crystalline rock cores using X ray computed tomography , 1993 .

[23]  Jiebo Luo,et al.  Image segmentation via adaptive K-mean clustering and knowledge-based morphological operations with biomedical applications , 1998, IEEE Trans. Image Process..

[24]  Andrew Zisserman,et al.  Estimation of the partial volume effect in MRI , 2002, Medical Image Anal..

[25]  Y. Yortsos,et al.  Use of pore network models to interpret laboratory experiments on vugular rocks , 1998 .

[26]  S. Paciornik,et al.  Uncertainty evaluation of metallographic measurements by image analysis and thermodynamic modeling , 2001 .

[27]  Julius T. Tou,et al.  Pattern Recognition Principles , 1974 .

[28]  K. Tani,et al.  Computerized X-ray tomography analysis of three-dimensional fault geometries in basement-induced wre , 2000 .

[29]  Three-dimensional miarolitic cavity distribution in the Kakkonda granite from borehole WD-1a using X , 2000 .

[30]  Lyndon S. Hibbard.  Region segmentation using information divergence measures , 2004, Medical Image Anal..

[31]  Augusto Sarti,et al.  Detection and characterisation of planar fractures using a 3D Hough transform , 2002, Signal Process..

[32]  Carlo D. Montemagno,et al.  Fracture network versus single fractures: Measurement of fracture geometry with X-ray tomography , 1999 .

[33]  A. R. Kovscek,et al.  Computed tomography in petroleum engineering research , 2003, Geological Society, London, Special Publications.

[34]  John M. Boone,et al.  Rapid Nondestructive Bulk Density and Soil-Water Content Determination by Computed Tomography , 1988 .

[35]  W. B. Lindquist,et al.  Pore and throat size distributions measured from synchrotron X-ray tomographic images of Fontaineble , 2000 .

[36]  Xose Manuel Pardo,et al.  A snake for CT image segmentation integrating region and edge information , 2001, Image Vis. Comput..

[37]  J. Schembre,et al.  Spontaneous imbibition characteristics of diatomite , 2000 .

[38]  O. Vizika,et al.  Macroscopic Conductivity of Vugular Porous Media , 2002 .