Classification of occupational activities for assessment of inhalation exposure.

There is a large variety of activities in workplaces that can lead to emission of substances. Coding systems based on determinants of emission have so far not been developed. In this paper, a system of Activity Classes and Activity Subclasses is proposed for categorizing activities involving chemical use. Activity Classes share their so-called 'emission generation mechanisms' and physical state of the product handled and the underlying determinants of emission. A number of (industrial) stakeholders actively participated in testing and fine-tuning the system. With the help of these stakeholders, it was found to be relatively easy to allocate a large number of activities to the Activity Classes and Activity Subclasses. The system facilitates a more structured classification of activities in exposure databases, a structured analysis of the analogy of exposure activities, and a transparent quantification of the activity emission potential in (new) exposure assessment models. The first use of the system is in the Advanced REACH Tool.

[1]  Sandhya Naidu Potana.  Environmental Performance of Copper Slag and Barshot as Abrasives , 2005 .

[2]  Carlos Rodriguez,et al.  The ECETOC approach to targeted risk assessment; lessons and experiences relevant to REACH , 2007, Journal of Exposure Science and Environmental Epidemiology.

[3]  Manuel R. Gómez.  Recommendations for Methods to Code Industry and Job Task in Routinely Collected Exposure Data , 1994 .

[4]  Hans Kromhout,et al.  Advanced Reach Tool (ART): development of the mechanistic model. , 2011, The Annals of occupational hygiene.

[5]  H Kromhout,et al.  The use of occupation and industry classifications in general population studies. , 2003, International journal of epidemiology.

[6]  E. Symanski,et al.  A comprehensive evaluation of within- and between-worker components of occupational exposure to chemical agents. , 1993, The Annals of occupational hygiene.

[7]  Hans Kromhout,et al.  Conceptual model for assessment of inhalation exposure: defining modifying factors. , 2008, The Annals of occupational hygiene.

[8]  Hans Kromhout,et al.  Tools for regulatory assessment of occupational exposure: development and challenges , 2007, Journal of Exposure Science and Environmental Epidemiology.

[9]  D Leith,et al.  Experimental examination of factors that affect dust generation. , 1991, American Industrial Hygiene Association journal.

[10]  Michael R. Flynn,et al.  A Model to Estimate Worker Exposure to Spray Paint Mists , 1997 .

[11]  D H Brouwer,et al.  A dermal model for spray painters. Part I: subjective exposure modelling of spray paint deposition. , 2001, The Annals of occupational hygiene.

[12]  Hans Kromhout,et al.  Trends in inhalation exposure--a review of the data in the published scientific literature. , 2007, The Annals of occupational hygiene.

[13]  Sanjay Datar.  Environmental Performance of Coal Slag and Garnet as Abrasives , 2003 .

[14]  Juha Laitinen,et al.  Default values for assessment of potential dermal exposure of the hands to industrial chemicals in the scope of regulatory risk assessments. , 2006, The Annals of occupational hygiene.

[15]  A. Callari,et al.  In this special issue , 1998 .

[16]  A Bjerre.  Assessing exposure to solvent vapour during the application of paints, etc.--model calculations versus common sense. , 1989, The Annals of occupational hygiene.

[17]  T. Schneider,et al.  Validation of a New Method for Structured Subjective Assessment of Past Concentrations , 1999 .

[18]  William A. Heitbrink,et al.  Mist generation at a machining center. , 2000 .

[19]  Bernard Carton,et al.  Comparison of Exposure Measurements Stored in European Databases on Occupational Air Pollutants and Definition of Core Information , 1995 .

[20]  C Cowherd,et al.  Dust inhalation exposures from the handling of small volumes of powders. , 1989, American Industrial Hygiene Association journal.

[21]  Hans Kromhout,et al.  A database of exposures in the rubber manufacturing industry: design and quality control. , 2005, The Annals of occupational hygiene.

[22]  Hans Marquart,et al.  RISKOFDERM: risk assessment of occupational dermal exposure to chemicals. An introduction to a series of papers on the development of a toolkit. , 2003, The Annals of occupational hygiene.

[23]  Konrad Hungerbühler,et al.  Assessing Occupational Exposure to Perchloroethylene in Dry Cleaning , 2006, Journal of occupational and environmental hygiene.

[24]  Charles Tricou.  Development of a High Transfer Efficiency Painting Technology Using Effervescent Atomization , 2012 .

[25]  A Hamill,et al.  Levels of exposure to wood dust. , 1991, The Annals of occupational hygiene.

[26]  H. Kromhout,et al.  Trends in Occupational Exposure to Styrene in the European Glass Fibre-Reinforced Plastics Industry , 2008, The Annals of occupational hygiene.

[27]  S. Rappaport,et al.  Assessment of long-term exposures to toxic substances in air. , 1991, The Annals of occupational hygiene.

[28]  Pam Susi,et al.  Engineering controls for selected silica and dust exposures in the construction industry--a review. , 2003, Applied occupational and environmental hygiene.

[29]  D M O'Brien,et al.  The application of dustiness tests to the prediction of worker dust exposure. , 1990, American Industrial Hygiene Association journal.

[30]  Hans Kromhout,et al.  Validation of the inhalable dust algorithm of the Advanced REACH Tool using a dataset from the pharmaceutical industry. , 2011, Journal of environmental monitoring : JEM.

[31]  Hans Kromhout,et al.  Advanced REACH Tool (ART): calibration of the mechanistic model. , 2011, Journal of environmental monitoring : JEM.

[32]  Raymond Vincent,et al.  Occupational exposure to mineral fibres: analysis of results stored on colchic database. , 2007, The Annals of occupational hygiene.

[33]  Erik Tielemans,et al.  'Stoffenmanager', a web-based control banding tool using an exposure process model. , 2008, The Annals of occupational hygiene.

[34]  K Willeke,et al.  An investigation of dust generation by free falling powders. , 1992, American Industrial Hygiene Association journal.

[35]  Wouter Fransman,et al.  Stoffenmanager exposure model: development of a quantitative algorithm. , 2008, The Annals of occupational hygiene.

[36]  Yves Roquelaure,et al.  Predictive factors for incident musculoskeletal disorders in an in-plant surveillance program. , 2007, The Annals of occupational hygiene.

[37]  Erik Olsen,et al.  European Proposal for Core Information for the Storage and Exchange of Workplace Exposure Measurements on Chemical Agents , 1997 .

[38]  William E. Halperin,et al.  Exposure of Workers Engaged in Furniture Stripping to Methylene Chloride as Determined by Environmental and Biological Monitoring , 1991 .

[39]  P J Hewitt,et al.  A model for prediction of fume formation rate in gas metal arc welding (GMAW), globular and spray modes, DC electrode positive. , 2001, The Annals of occupational hygiene.

[40]  Irma Welling,et al.  Occupational exposure to inhalable wood dust in the member states of the European Union. , 2006, The Annals of occupational hygiene.

[41]  Elaine Symanski,et al.  Assessment of variability in biomonitoring data using a large database of biological measures of exposure. , 2002, AIHA journal : a journal for the science of occupational and environmental health and safety.

[42]  John Kingston,et al.  The development of the EASE model. , 2005, The Annals of occupational hygiene.

[43]  Juha Laitinen,et al.  Task-based dermal exposure models for regulatory risk assessment. , 2006, The Annals of occupational hygiene.

[44]  Paul Cooper,et al.  Controlling dust emissions and explosion hazards in powder handling plants , 2005 .

[45]  H Kromhout,et al.  Trends in levels of inhalable dust exposure, exceedance and overexposure in the European carbon black manufacturing industry. , 2000, The Annals of occupational hygiene.