Energy dissipation efficiency in aluminum dependent on monotonic flow curves and dynamic recovery

[1]  H. Mcqueen,et al.  New method for determining sinh constitutive constants for high temperature deformation of 300 austenitic steels , 1992 .

[2]  M. E. Kassner,et al.  Dynamic restoration mechanisms in Al-5.8 At. Pct Mg deformed to large strains in the solute drag regime , 1992 .

[3]  R. Doherty,et al.  Plane polarized optical microscopy studies of the structure of hot-deformed and partially recrystallized aluminium samples , 1991 .

[4]  Y. Prasad,et al.  Dynamic recrystallization during hot deformation of aluminum: A study using processing maps , 1991 .

[5]  M. E. Kassner,et al.  The Classification and Determination of Restoration Mechanisms in the Hot Working of Al Alloys , 1991 .

[6]  H. Oikawa.  Hot Deformation of Aluminum Alloys , 1990 .

[7]  H. Mcqueen,et al.  Comparison of dynamic softening in 301, 304, 316 and 317 stainless steels , 1990 .

[8]  H. Mcqueen,et al.  Work hardening, strength and ductility in the hot working of 304 austenitic stainless steel , 1990 .

[9]  H. Mcqueen,et al.  Influence of ultra-high strains at elevated temperatures on the microstructure of aluminium. Part I , 1989 .

[10]  H. Mcqueen,et al.  Evolution of flow stress in aluminium during ultra-high straining at elevated temperatures. Part II , 1989 .

[11]  M. E. Kassner,et al.  Large-strain torsional deformation in aluminum at elevated temperatures , 1989 .

[12]  M. Kiritani,et al.  The γ → α transformation mechanism of fine iron precipitates in copper base alloys , 1988 .

[13]  T. Mcnelley,et al.  Microstructural evolution by continuous recrystallization in a superplastic Al-Mg alloy , 1988 .

[14]  E. Evangelista,et al.  Substructures in aluminium from dynamic and static recovery , 1988 .

[15]  F. J. Humphreys,et al.  Dislocation-particle interactions during high temperature deformation of two-phase aluminium alloys , 1987 .

[16]  M. E. Kassner,et al.  The dislocation microstructure of aluminum , 1987, Metallurgical and Materials Transactions A.

[17]  D. Caillard,et al.  New trends in creep microstructural models for pure metals , 1987 .

[18]  J. Čadek,et al.  Dislocation structures and structural steady state in steady state creep , 1986 .

[19]  G. Pharr,et al.  A compilation and analysis of data for the stress dependence of the subgrain size , 1986 .

[20]  E. Evangelista,et al.  Hot deformation and dynamic recrystallization of Al-5Mg-0.8Mn alloy , 1984 .

[21]  H. J. Mcqueen,et al.  Recent advances in hot working: Fundamental dynamic softening mechanisms , 1984 .

[22]  John J. Jonas,et al.  Overview no. 35 Dynamic recrystallization: Mechanical and microstructural considerations , 1984 .

[23]  N. Parson,et al.  Dynamic recrystallization in Al–7Mg alloy , 1983 .

[24]  R. Raj.  Development of a Processing Map for Use in Warm-Forming and Hot-Forming Processes , 1981 .

[25]  M. Guégan,et al.  Mesure en continu des dimensions de ronds laminés à chaud , 1981 .

[26]  T. Sheppard,et al.  Effect of process parameters on structure and properties of Al–5Mg–O·8Mn alloy (AA 5456) , 1981 .

[27]  T. Sheppard.  Temperature and speed effects in hot extrusion of aluminium alloys , 1981 .

[28]  M. Raghavan,et al.  Structure and strengthening of Al-Mg alloys during hot working , 1980 .

[29]  T. Sheppard,et al.  Development of duplex deformation substructure during extrusion of a commercial Al-5Mg-0.8Mn alloy , 1980 .

[30]  H. Flower,et al.  Development of recovered dislocation substructures during plastic flow , 1979 .

[31]  K. Okazaki,et al.  Effects of strain rate, temperature and interstitial content on the electroplastic effect in titanium , 1979 .

[32]  R. Grimes,et al.  Recrystallization during hot deformation of aluminium alloys , 1979 .

[33]  C. M. Sellars.  Recrystallization of metals during hot deformation , 1978, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[34]  H. Mcqueen,et al.  The production and utility of recovered dislocation substructures , 1977 .

[35]  M. Stowell,et al.  Superplastic aluminium-based alloys , 1976 .

[36]  M. Myshlyaev,et al.  Superplasticity and structure of aluminium , 1974 .

[37]  W. A. Wong,et al.  DEFORMATION OF ALUMINIUM AT HIGH TEMPERATURES AND STRAIN RATES , 1967 .

[38]  C. Sellars,et al.  On the mechanism of hot deformation , 1966 .

[39]  H. Stüwe.  Dynamische erholung bei der warmverformung , 1965 .

[40]  H. Mcqueen,et al.  Relationship of energy dissipation efficiency to microstructural evolution in hot working of AISI 304 steel , 1995 .

[41]  M. E. Kassner,et al.  Comments on, “Dynamic recrystalization during hot compression in Al-Mg alloy” , 1993 .

[42]  J. Jonas,et al.  Strength of metals and alloys , 1985 .

[43]  H. Mcqueen,et al.  Microstructural evolution in Al deformed to strains of 60 at 400°C , 1985 .

[44]  W. Nix,et al.  Mechanisms Controlling Creep of Single Phase Metals and Alloys , 1979 .

[45]  F. Haessner.  Recrystallization of metallic materials , 1978 .

[46]  J. Jonas,et al.  Recovery and Recrystallization during High Temperature Deformation , 1975 .

[47]  R. Arsenault.  Plastic deformation of materials , 1975 .

[48]  H. Mcqueen,et al.  Dynamic recovery of aluminum during hot rolling , 1969 .