Effect of Annealing on Microstructure and Mechanical Properties of Ultrafine-Grained Low-Carbon Medium-Manganese Steel Produced by Heavy Warm Rolling

[1]  Carsten,et al.  SCR , 2020, Catalysis from A to Z.

[2]  Huijun Li,et al.  Improvement of High-Temperature Mechanical Properties of Low-Carbon RAFM Steel by MX Precipitates , 2018, Acta Metallurgica Sinica (English Letters).

[3]  N. Yan,et al.  Hot Deformation Behavior and Processing Maps of a High Al-low Si Transformation-Induced Plasticity Steel: Microstructural Evolution and Flow Stress Behavior , 2018, Acta Metallurgica Sinica (English Letters).

[4]  Xiaogang Li,et al.  Effect of Heat Treatment on Microstructure and Mechanical Properties of Quenching and Partitioning Steel , 2018, Acta Metallurgica Sinica (English Letters).

[5]  A. Gourgues-Lorenzon,et al.  Microstructure, plastic flow and fracture behavior of ferrite-austenite duplex low density medium Mn steel , 2017 .

[6]  Wei Li,et al.  Tensile behaviors and deformation mechanism of a medium Mn-TRIP steel at different temperatures , 2017 .

[7]  R. Misra,et al.  Microstructure and deformation behavior of the hot-rolled medium manganese steels with varying aluminum-content , 2016 .

[8]  Suiyuan Chen,et al.  Austenite stability and its effect on the toughness of a high strength ultra-low carbon medium manganese steel plate , 2016 .

[9]  A. Shan,et al.  Effects of annealing on microstructure and mechanical properties of nano-grained Ni-based alloy produced by severe cold rolling , 2015 .

[10]  H. Ding,et al.  Mechanical properties and austenite stability in hot-rolled 0.2C–1.6/3.2Al–6Mn–Fe TRIP steel , 2015 .

[11]  Bernardo Kucinski.  46 , 2015, Tao te Ching.

[12]  Kindra M Kelly-Scumpia,et al.  51 , 2015, Tao te Ching.

[13]  H. Bhadeshia,et al.  Ausforming of medium carbon steel , 2015 .

[14]  R. Misra,et al.  Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content , 2015 .

[15]  Xin Sun,et al.  Effects of Intercritical Annealing Temperature on Mechanical Properties of Fe-7.9Mn-0.14Si-0.05Al-0.07C Steel , 2014, Materials.

[16]  R. Misra,et al.  Enhanced stability of retained austenite and consequent work hardening rate through pre-quenching prior to quenching and partitioning in a Q–P microalloyed steel , 2014 .

[17]  L. Du,et al.  A nanograined/ultrafine-grained low-carbon microalloyed steel processed by warm rolling , 2014 .

[18]  R. Misra,et al.  Unique impact of ferrite in influencing austenite stability and deformation behavior in a hot-rolled Fe–Mn–Al–C steel , 2014 .

[19]  Chong-xiang Huang,et al.  Intercritical rolling induced ultrafine microstructure and excellent mechanical properties of the medium-Mn steel , 2013 .

[20]  Xin Sun,et al.  Improved ductility of a transformation-induced-plasticity steel by nanoscale austenite lamellae , 2013 .

[21]  R. Misra,et al.  Significance of control of austenite stability and three-stage work-hardening behavior of an ultrahigh strength–high ductility combination transformation-induced plasticity steel , 2013 .

[22]  H. Bhadeshia,et al.  Austenite stability and heterogeneous deformation in fine-grained transformation-induced plasticity assisted steel , 2013 .

[23]  I. Jung,et al.  Development of 3rd generation AHSS with medium Mn content alloying compositions , 2013 .

[24]  Bing Chen,et al.  The effect of morphology on the stability of retained austenite in a quenched and partitioned steel , 2013 .

[25]  D. Matlock,et al.  Transmission Electron Microscopy Analysis of Yielding in Ultrafine-Grained Medium Mn Transformation-Induced Plasticity Steel , 2013, Metallurgical and Materials Transactions A.

[26]  Chong-xiang Huang,et al.  Deformation microstructures and strengthening mechanisms of an ultrafine grained duplex medium-Mn steel , 2013 .

[27]  A. Shan,et al.  Effects of annealing on microstructure and mechanical properties of nano-grained titanium produced by combination of asymmetric and symmetric rolling , 2012 .

[28]  D. Raabe,et al.  Multistage strain hardening through dislocation substructure and twinning in a high strength and duc , 2012 .

[29]  A. Shan,et al.  Lüders-like deformation induced by delta-ferrite-assisted martensitic transformation in a dual-phase high-manganese steel , 2012 .

[30]  E. Bagherpour,et al.  On the capability of severe plastic deformation of twining induced plasticity (TWIP) steel , 2012 .

[31]  J. Zhao,et al.  Heat treatment effects on the microstructure and mechanical properties of a medium manganese steel (0.2C–5Mn) , 2012 .

[32]  Mao-qiu Wang,et al.  Microstructure and mechanical properties of Fe–0.2C–5Mn steel processed by ART-annealing , 2011 .

[33]  Seok-Jae Lee,et al.  Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning , 2011 .

[34]  T. Hanamura,et al.  Excellent Total Mechanical-Properties-Balance of 5% Mn, 30000 MPa% Steel , 2011 .

[35]  Dierk Raabe,et al.  Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of aging , 2011 .

[36]  Wenquan Cao,et al.  Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite , 2010 .

[37]  D. Suh,et al.  Strain partitioning and mechanical stability of retained austenite , 2010 .

[38]  D. Suh,et al.  Influence of Al on the Microstructural Evolution and Mechanical Behavior of Low-Carbon, Manganese Transformation-Induced-Plasticity Steel , 2010 .

[39]  H. K. D. H. Bhadeshia,et al.  Austenite grain size and the martensite-start temperature , 2009 .

[40]  Zhuang Li,et al.  Effects of Hot Deformation and Subsequent Austempering on the Mechanical Properties of Si-Mn TRIP Steels , 2006 .

[41]  D. Ponge,et al.  Mechanical properties of an ultrafine grained C-Mn steel processed by warm deformation and annealing , 2005 .

[42]  C. Davidson,et al.  Microhardness mapping and the hardness-yield strength relationship in high-pressure diecast magnesium alloy AZ91 , 2005 .

[43]  R. Valiev,et al.  Annealing behaviour of nanostructured carbon steel produced by severe plastic deformation , 2003 .

[44]  N. Tsuji,et al.  Nanoscale crystallographic analysis of ultrafine grained IF steel fabricated by ARB process , 2002 .

[45]  Jongryoul Kim,et al.  Development of deformation structures in low carbon steel by equal channel angular pressing , 2001 .

[46]  F. Delannay,et al.  On the sources of work hardening in multiphase steels assisted by transformation-induced plasticity , 2001 .

[47]  C. M. Wayman,et al.  Substructure of ausformed martensite in Fe-Ni and Fe-Ni-C alloys , 1976 .

[48]  R. Miller.  Ultrafine-grained microstructures and mechanical properties of alloy steels , 1972 .

[49]  E. Hall,et al.  The Deformation and Ageing of Mild Steel: III Discussion of Results , 1951 .

[50]  A. Götte,et al.  Metall , 1897 .