TanDEM-X: A single-pass SAR interferometer for global DEM generation and demonstration of new SAR techniques

TanDEM-X (TerraSAR-X add-on for Digital Elevation Measurements) is an Earth observation radar mission that consists of a SAR interferometer built by two almost identical satellites flying in close formation [1]-[4]. With a typical separation between the satellites of 120 to 500 m a global Digital Elevation Model (DEM) with 2 m relative height accuracy at 12 m posting is being generated. While the main mission phase for DEM data acquisition has been finished in 2014, the processing of the global TanDEM-X DEM will be concluded mid-2016. Final DEMs for more than 65% of all land masses are already available for scientific and commercial applications. A 15-month science phase of the TanDEM-X mission started in October 2014 which offers the opportunity to explore the generation of DEMs with even higher accuracy for selected areas, and to demonstrate the capabilities of this unique mission for new scientific applications.

[1]  A. Roth,et al.  Design of the DEM Mosaicking and Calibration Processor for TanDEM-X , 2008 .

[2]  Marco D'Errico,et al.  Distributed Space Missions for Earth System Monitoring , 2013 .

[3]  Gerhard Krieger,et al.  Coherence evaluation of TanDEM-X interferometric data , 2012 .

[4]  M. Wermuth,et al.  Flight Dynamics Operations of the TanDEM-X Formation , 2012 .

[5]  Maria Donata Polimeni,et al.  TanDEM-X: DEM Acquisition in the Third Year Era , 2013 .

[6]  David Miller,et al.  The TerraSAR-X Satellite , 2010, IEEE Transactions on Geoscience and Remote Sensing.

[7]  Gerhard Krieger,et al.  TanDEM-X: The New Global DEM Takes Shape , 2014, IEEE Geoscience and Remote Sensing Magazine.

[8]  Gerhard Krieger,et al.  Bistatic system and baseline calibration in TanDEM-X to ensure the global digital elevation model quality , 2012 .

[9]  Manfred Zink,et al.  The joint TerraSAR-X / TanDEM-X ground segment , 2011, 2011 IEEE International Geoscience and Remote Sensing Symposium.

[10]  Gerhard Krieger,et al.  InSAR and DEM quality monitoring of TanDEM-X , 2012, 2012 IEEE International Geoscience and Remote Sensing Symposium.

[11]  Gerhard Krieger,et al.  Relative height error analysis of TanDEM-X elevation data , 2012 .

[12]  Stefan Buckreuss,et al.  The TerraSAR-X Ground Segment , 2010, IEEE Transactions on Geoscience and Remote Sensing.

[13]  Birgit Wessel,et al.  TanDEM-X Ground Segment – DEM Products Specification Document , 2013 .

[14]  Gerhard Krieger,et al.  TANDEM-L: MONITORING THE EARTH'S DYNAMICS WITH INSAR AND POL-INSAR , 2009 .

[15]  Jaime Hueso Gonzalez,et al.  TanDEM-X: A satellite formation for high-resolution SAR interferometry , 2007 .

[16]  Gerhard Krieger,et al.  Interferometric Synthetic Aperture Radar (SAR) Missions Employing Formation Flying , 2010, Proceedings of the IEEE.

[17]  Helko Breit,et al.  Interferometric processing and products of the TanDEM-X mission , 2012, 2012 IEEE International Geoscience and Remote Sensing Symposium.