Lithography beyond light: Microcontact printing with monolayer resists

We describe high-resolution lithography based on transfer of a pattern from an elastomeric stamp to a solid substrate by conformal contact : a nanoscale interaction between substrate and stamp on macroscopic scales that allows transport of material from stamp to substrate. The stamp is first formed by curing poly(dimethyl siloxane) (PDMS) on a master with the negative of the desired surface, resulting in an elastomeric solid with a pattern of reliefs, typically a few microns deep, on its surface. The stamp provides an ink that forms a self-assembled monolayer (SAM) on a solid surface by a covalent, chemical reaction. Because SAMs act as highly localized and efficient barriers to some wet etches, microcontact printing forms part of a convenient lithographic system not subject to diffraction or depth of focus limitations while still providing simultaneous transfer of patterned features. Our study helps to define the strengths and limitations of microcontact printing with SAMs, a process that is necessary to assess its worth to technology. We used lithography based on scanning tunneling microscopy (STM) to demonstrate that disruption of SAMs on gold allowed the formation of etched features as small as 20 nm using a CN - /O 2 etch. This result implied that etching occurred where damage of a few molecules in the ordered SAM allowed passage of cyanide, whereas adjacent molecules in the SAM remained unperturbed at this scale. Features as small as 30 nm 2 etched in gold over areas greater than 1 cm 2 resulted from microcontact printing with replicas of electron-beam-formed masters, with the transfer of these printed SAMs requiring only 1 s. STM studies of these transferred SAMs revealed an achievable order indistinguishable from that found for SAMs prepared from solution. Facile alignment of printing steps at submicron scales may result from new designs of stamps that exploit their limited deformability and lock-and-key-type approaches to mate stamp and substrate.

[1]  G. Whitesides,et al.  Complex Optical Surfaces Formed by Replica Molding Against Elastomeric Masters , 1996, Science.

[2]  George M. Whitesides,et al.  Micromolding in Capillaries: Applications in Materials Science , 1996 .

[3]  G. Whitesides,et al.  Microcontact Printing of Palladium Colloids: Micron-Scale Patterning by Electroless Deposition of Copper , 1996 .

[4]  Christian Joachim,et al.  Controlled Room-Temperature Positioning of Individual Molecules: Molecular Flexure and Motion , 1996, Science.

[5]  E. S. Snow,et al.  AFM Fabrication of Sub-10-Nanometer Metal-Oxide Devices with in Situ Control of Electrical Properties , 1995, Science.

[6]  Stephen Y. Chou,et al.  Imprint of sub-25 nm vias and trenches in polymers , 1995 .

[7]  C. Bain,et al.  Surface Vibrational Spectroscopy of Organic Counterions Bound to a Surfactant Monolayer , 1995 .

[8]  George M. Whitesides,et al.  Microcontact printing of octadecylsiloxane on the surface of silicon dioxide and its application in microfabrication , 1995 .

[9]  G M Whitesides,et al.  Fabrication of submicrometer features on curved substrates by microcontact printing. , 1995, Science.

[10]  George M. Whitesides,et al.  Patterned self-assembled monolayers formed by microcontact printing direct selective metalization by chemical vapor deposition on planar and nonplanar substrates , 1995 .

[11]  G. Whitesides,et al.  Polymer microstructures formed by moulding in capillaries , 1995, Nature.

[12]  G. Whitesides,et al.  Lithographic molding: A convenient route to structures with sub‐micrometer dimensions** , 1995 .

[13]  Emmanuel Delamarche,et al.  End-Group-Dominated Molecular Order in Self-Assembled Monolayers , 1995 .

[14]  Peter G. Schultz,et al.  A Strategy for the Chemical Synthesis of Nanostructures , 1995, Science.

[15]  G. Whitesides,et al.  Self-Assembled Monolayers of Long-Chain Hydroxamic Acids on the Native Oxides of Metals , 1995 .

[16]  G. Whitesides,et al.  Scanning Force Microscopies Can Image Patterned Self-Assembled Monolayers , 1995 .

[17]  G. Whitesides,et al.  Fabrication of patterned, electrically conducting polypyrrole using a self-assembled monolayer : a route to all-organic circuits , 1995 .

[18]  G. Whitesides,et al.  Use of a Patterned Self-Assembled Monolayer To Control the Formation of a Liquid Resist Pattern on a Gold Surface , 1995 .

[19]  C. Gerber,et al.  Real-Space Observation of Nanoscale Molecular Domains in Self-Assembled Monolayers , 1994 .

[20]  Harold G. Craighead,et al.  Scanning tunneling microscopy based lithography of octadecanethiol on Au and GaAs , 1994 .

[21]  George M. Whitesides,et al.  Self-Organization of Organic Liquids on Patterned Self-Assembled Monolayers of Alkanethiolates on Gold , 1994 .

[22]  C. Schönenberger,et al.  What Are the "Holes" in Self-Assembled Monolayers of Alkanethiols on Gold? , 1994 .

[23]  S. Wittekoek,et al.  Optical lithography: Present status and continuation below 0.25 μm , 1994 .

[24]  P. Pistorio,et al.  Managerial and economical challenges for VLSI/ULSI , 1994 .

[25]  George M. Whitesides,et al.  Features of gold having micrometer to centimeter dimensions can be formed through a combination of stamping with an elastomeric stamp and an alkanethiol ‘‘ink’’ followed by chemical etching , 1993 .

[26]  George M. Whitesides,et al.  Scanning electron microscopy can form images of patterns in self-assembled monolayers , 1993 .

[27]  C D Frisbie,et al.  Imaging of features on surfaces by condensation figures. , 1993, Science.

[28]  P. Fenter,et al.  Chain-length dependence of the structures and phases of CH3(CH2)n-1 SH self-assembled on Au(111). , 1993, Physical review letters.

[29]  R. Crooks,et al.  Direct visualization of defect structures contained within self-assembled organomercaptan monolayers: Combined use of electrochemistry and scanning tunneling microscopy , 1993 .

[30]  G. Scoles,et al.  Superlattice structure at the surface of a monolayer of octadecanethiol self‐assembled on Au(111) , 1993 .

[31]  G. Whitesides,et al.  The use of self-assembled monolayers and a selective etch to generate patterned gold features , 1992 .

[32]  G M Whitesides,et al.  Manipulation of the Wettability of Surfaces on the 0.1- to 1 -Micrometer Scale Through Micromachining and Molecular Self-Assembly , 1992, Science.

[33]  D. Rugar,et al.  Thermomechanical writing with an atomic force microscope tip , 1992 .

[34]  T. M. Putvinski,et al.  Polar Orientation of Dyes in Robust Multilayers by Zirconium Phosphate-Phosphonate Interlayers , 1991, Science.

[35]  G. Whitesides,et al.  Molecular self-assembly and nanochemistry: a chemical strategy for the synthesis of nanostructures. , 1991, Science.

[36]  George M. Whitesides,et al.  Comparison of the Structures and Wetting Properties of Self-Assembled Monolayers of n- Alkanethiols on the Coinage Metal Surfaces, Cu, Ag, Au' , 1991 .

[37]  D. Eigler,et al.  An atomic switch realized with the scanning tunnelling microscope , 1991, Nature.

[38]  G M Whitesides,et al.  Molecular Self-Assembly of Two-Terminal, Voltammetric Microsensors with Internal References , 1991, Science.

[39]  J. Rebek.  Molecular Recognition and Biophysical Organic Chemistry , 1990 .

[40]  R. Nuzzo,et al.  Studies of the temperature-dependent phase behavior of long chain n-alkyl thiol monolayers on gold , 1990 .

[41]  C. Chidsey,et al.  Chemical functionality in self-assembled monolayers: structural and electrochemical properties , 1990 .

[42]  Ralph G. Nuzzo,et al.  Fundamental studies of microscopic wetting on organic surfaces. 2. Interaction of secondary adsorbates with chemically textured organic monolayers , 1990 .

[43]  G M Whitesides,et al.  Orthogonal Self-Assembled Monolayers: Alkanethiols on Gold and Alkane Carboxylic Acids on Alumina , 1989, Science.

[44]  G. Whitesides,et al.  Modeling Organic Surfaces with Self‐Assembled Monolayers , 1989 .

[45]  B. Michel,et al.  An STM for biological applications: Bioscope , 1988 .

[46]  A. N. Broers,et al.  Resolution limits for electron-beam lithography , 1988 .

[47]  J. Sagiv,et al.  On the formation and structure of self-assembling monolayers , 1984 .

[48]  R. Nuzzo,et al.  ADSORPTION OF BIFUNCTIONAL ORGANIC DISULFIDES ON GOLD SURFACES , 1983 .