A CMOS Active Feedback Balun-LNA With High IIP2 for Wideband Digital TV Receivers

A wideband active feedback single-to-differential (S-to-D) low-noise amplifier (LNA) for digital TV (DTV) tuners composed of a S-to-D converter, a voltage combiner, and a negative feedback network is proposed to achieve low noise as well as to improve the linearity performances (IIP2 and IIP3) simultaneously. By feeding the single-ended output of the voltage combiner, which is used for combining the differential output of the S-to-D converter, to the input of the LNA through the feedback network, a wideband S-to-D LNA exploiting negative feedback is implemented. The differential mode operation of the voltage combiner reduces the second-order nonlinearity feedback, allowing us to improve both the IIP3 and IIP2 of the LNA at the same time. Two LNA design examples are presented to demonstrate usefulness of the proposed approach. The LNA I, by adopting a common source (CS) amplifier with a common gate, common source (CGCS) balun load as the S-to-D converter, is able to achieve a high gain and a low noise figure (NF) by increasing the loop gain. The LNA II using the differential amplifier with the ac-grounded second input terminal is designed for robust IIP2 to PVT variations.

[1]  Chien-Nan Kuo,et al.  Low power 8-GHz ultra-wideband active balun , 2006, Digest of Papers. 2006 Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems.

[2]  Eric A. M. Klumperink,et al.  A 300–800 MHz Tunable Filter and Linearized LNA Applied in a Low-Noise Harmonic-Rejection RF-Sampling Receiver , 2010, IEEE Journal of Solid-State Circuits.

[3]  Danilo Manstretta,et al.  A low-noise active balun with IM2 cancellation for multiband portable DVB-H receivers , 2009, 2009 IEEE International Solid-State Circuits Conference - Digest of Technical Papers.

[4]  Tzu-Chan Chueh,et al.  Wideband LNA Compatible for Differential and Single-Ended Inputs , 2009, IEEE Microwave and Wireless Components Letters.

[5]  Eric A. M. Klumperink,et al.  A Wideband Balun LNA I/Q-Mixer combination in 65nm CMOS , 2008, ISSCC.

[6]  J. Laskar,et al.  Resistive-Feedback CMOS Low-Noise Amplifiers for Multiband Applications , 2008, IEEE Transactions on Microwave Theory and Techniques.

[7]  H.-R. Chuang,et al.  A 40~900MHz Broadband CMOS Differential LNA with Gain-Control for DTV RF Tuner , 2005, 2005 IEEE Asian Solid-State Circuits Conference.

[8]  I. Nam,et al.  CMOS RF amplifier and mixer circuits utilizing complementary Characteristics of parallel combined NMOS and PMOS devices , 2005, IEEE Transactions on Microwave Theory and Techniques.

[9]  S.S. Taylor,et al.  A 5GHz resistive-feedback CMOS LNA for low-cost multi-standard applications , 2006, 2006 IEEE International Solid State Circuits Conference - Digest of Technical Papers.

[10]  G. Retz,et al.  A CMOS up-conversion receiver front-end for cable and terrestrial DTV applications , 2003, 2003 IEEE International Solid-State Circuits Conference, 2003. Digest of Technical Papers. ISSCC..

[11]  M. Notten,et al.  A 48-860 MHz TV splitter amplifier exhibiting an IIP2 and IIP3 of 94dBmV and 73dBmV , 2004, Proceedings of the 30th European Solid-State Circuits Conference.

[12]  Bang-Sup Song,et al.  A CMOS TV tuner/demodulator IC with digital image rejection , 2005, IEEE Journal of Solid-State Circuits.

[13]  Gaetano Palumbo,et al.  Harmonic distortion in non-linear amplifier with non-linear feedback , 1998, Int. J. Circuit Theory Appl..

[14]  Bumman Kim,et al.  Wide-band CMOS loop-through amplifier for Cable TV tuner , 2008, 2008 IEEE Radio Frequency Integrated Circuits Symposium.

[15]  Jinghong Chen,et al.  ESD-Protected Wideband CMOS LNAs Using Modified Resistive Feedback Techniques With Chip-on-Board Packaging , 2008, IEEE Transactions on Microwave Theory and Techniques.

[16]  Deukhyoun Heo,et al.  A new 0.25um CMOS on-chip active balun with gain controllability for 5GHz DCR [direct conversion receiver] , 2005, Proceedings. IEEE SoutheastCon, 2005..

[17]  Ahmad Mirzaei,et al.  A 6.5 GHz wideband CMOS low noise amplifier for multi-band use , 2005, Proceedings of the IEEE 2005 Custom Integrated Circuits Conference, 2005..

[18]  B. Nauta,et al.  Wideband Balun-LNA With Simultaneous Output Balancing, Noise-Canceling and Distortion-Canceling , 2008, IEEE Journal of Solid-State Circuits.

[19]  Ilku Nam,et al.  A CMOS resistive feedback single to differential low noise amplifier with multiple-tuner-outputs for a digital TV tuner , 2009, 2009 IEEE Radio Frequency Integrated Circuits Symposium.

[20]  D. Manstretta.  A broadband low-noise single-ended input differential output amplifier with IM2 cancelling , 2008, 2008 IEEE Radio Frequency Integrated Circuits Symposium.

[21]  Yves Rolain,et al.  Nonlinearity Analysis of Analog/RF Circuits Using Combined Multisine and Volterra Analysis , 2007, 2007 Design, Automation & Test in Europe Conference & Exhibition.

[22]  J. Laskar,et al.  A 20 GHz low noise amplifier with active balun in a 0.25 um SiGe BICMOS technology , 2004, IEEE Compound Semiconductor Integrated Circuit Symposium, 2004..

[23]  B. Nauta,et al.  Wide-band CMOS low-noise amplifier exploiting thermal noise canceling , 2004, IEEE Journal of Solid-State Circuits.

[24]  Eric Andre,et al.  23.3 A 0.12∝m CMOS DVB-T Tuner , 2005 .

[25]  P. Wambacq,et al.  Low-Area Active-Feedback Low-Noise Amplifier Design in Scaled Digital CMOS , 2008, IEEE Journal of Solid-State Circuits.