Eye-safe digital 3-D sensing for space applications

This paper focuses on the characteristics and performance of an eye-safe laser range scanner (LARS) with short- and medium-range 3-D sensing capabilities for space applications. This versatile LARS is a precision measurement tool that will complement the current Canadian Space Vision System. The major advantages of the LARS over conventional video-based imaging are its ability to operate with sunlight shining directly into the scanner and its immunity to spurious reflections and shadows, which occur frequently in space. Because the LARS is equipped with two high-speed galvanometers to steer the laser beam, any spatial location within the field of view of the camera can be addressed. This versatility enables the LARS to operate in two basic scan pattern modes: (1) variable-scan-resolution mode and (2) raster-scan mode. In the variable-resolution mode, the LARS can search and track targets and geometrical features on objects located within a field of view of 30 by 30 deg and with corresponding range from about 0.5 to 2000 m. The tracking mode can reach a refresh rate of up to 130 Hz. The raster mode is used primarily for the measurement of registered range and intensity information on large stationary objects. It allows, among other things, target-based measurements, feature-based measurements, and surface-reflectance monitoring. The digitizing and modeling of human subjects, cargo payloads, and environments are also possible with the LARS. Examples illustrating its capabilities are presented.

[1]  Sabry F. El-Hakim,et al.  Practical range camera calibration , 1993, Other Conferences.

[2]  Francois Blais,et al.  Digital three-dimensional imaging in the infrared at the National Research Council of Canada , 1994, Optics & Photonics.

[3]  Marc Rioux,et al.  Design Of A Large Depth Of View Three-Dimensional Camera For Robot Vision , 1987 .

[4]  G. Hausler,et al.  Triangulation With Expanded Range Of Depth , 1985 .

[5]  Robert J. Heins,et al.  Laser rangefinder for the near-earth asteroid rendezvous (NEAR) mission , 1995, Remote Sensing.

[6]  Francois Blais,et al.  Intelligent variable-resolution laser scanner for the space vision system , 1991, Defense, Security, and Sensing.

[7]  M. Rioux,et al.  Real-time numerical peak detector , 1986 .

[8]  Marc Rioux.  Color 3D electronic imaging of the surface of the human body , 1994, Optics & Photonics.

[9]  R W Simpson,et al.  Noise in large-aperture self-scanned diode arrays. , 1979, The Review of scientific instruments.

[10]  Michael J. Massimino,et al.  Vision-based robotic system for space applications , 1993, Other Conferences.

[11]  Eric R. Fossum,et al.  Infrared readout electronics for space-science sensors: state of the art and future directions , 1993, Optics & Photonics.

[12]  M Rioux,et al.  Centroid fluctuations of speckled targets. , 1991, Applied optics.

[13]  G Hausler,et al.  Triangulation With Expanded Range Of Depth , 1986, Other Conferences.

[14]  S.G. Maclean,et al.  Vision system development in a space simulation laboratory , 1990, ISPRS International Conference on Computer Vision and Remote Sensing.

[15]  M. Rioux,et al.  Influence of speckle on laser range finders. , 1991, Applied optics.

[16]  Richard C. Hughes,et al.  Space Station - an Application for Computer Vision , 1989, Computer Vision and Shape Recognition.

[17]  Francois Blais,et al.  Practical Considerations For A Design Of A High Precision 3-D Laser Scanner System , 1988, Other Conferences.

[18]  Marc Rioux,et al.  Color Reflectance Modeling Using a Polychromatic Laser Range Sensor , 1992, IEEE Trans. Pattern Anal. Mach. Intell..

[19]  Abhay M. Joshi,et al.  512- and 1024-element linear InGaAs detector arrays for near-infrared (1-3μm) environmental sensing , 1992, Optics & Photonics.

[20]  Francois Blais,et al.  Eye-safe imaging and tracking laser scanner system for space applications , 1996, Defense, Security, and Sensing.

[21]  Marc Rioux,et al.  Object model creation from multiple range images: acquisition, calibration, model building and verification , 1997, Proceedings. International Conference on Recent Advances in 3-D Digital Imaging and Modeling (Cat. No.97TB100134).

[22]  M Rioux,et al.  Laser range finder based on synchronized scanners. , 1984, Applied optics.

[23]  Abhay M. Joshi,et al.  Popcorn noise in linear In0.53Ga0.47As detector arrays , 1992, Defense, Security, and Sensing.

[24]  Marc Rioux,et al.  Development of a real-time laser scanning system for object recognition, inspection, and robot control , 1993, Other Conferences.

[25]  G Hausler,et al.  Triangulation With Large Dynamical Range , 1986, Other Conferences.

[26]  Jack L. Bufton.  Shuttle Laser Altimeter , 1997, Technical Digest CLEO/Pacific Rim '97 Pacific Rim Conference on Lasers and Electro-Optics.

[27]  G.M. Borsuk.  Photodetectors for acousto-optic signal processors , 1981, Proceedings of the IEEE.

[28]  Richard J. Mammone,et al.  Automatic systems for the identification and inspection of humans : 28-29 July 1994, San Diego, California , 1994 .