Is Changing Box Weight an Effective Ergonomic Control?

With the rising costs of low back injuries, one low cost ergonomic solution would be to reduce the weight. But, limited research has investigated how the worker interacts with the box. This study evaluated how lifting different box weights effects the trunk kinematics, horizontal moment arm, and resulting spinal loads. Fifteen participants lifted a box weighing 9.1, 11.8, 14.5, 17.2, 20.0, 29.9, 32.7, 35.4, 38.1, and 41.7 kg., from knee height, carried it a distance of five feet, and placed it on a shelf at elbow height. The present study quantifies the utility of reducing the weight lifted. Small changes in weight were found to only slightly influence the trunk kinematics and spinal loads. The accuracy of the spinal load estimates were found to be influenced by the trunk dynamics and changes in horizontal moment arm, especially for the lighter weights evaluated in this study. These results can be used to establish potential weight limits to assist in the ergonomic redesign of a manual material handling task.

[1]  M. Key.  National Institute for Occupational Safety and Health; occupational exposure to inorganic lead: request for comments and information; republication--NIOSH. Request for comments and information relevant to occupational exposure to inorganic lead. , 1997, Federal register.

[2]  Gary A. Mirka,et al.  Accuracy of a three-dimensional lumbar motion monitor for recording dynamic trunk motion characteristics , 1992 .

[3]  C G Drury,et al.  Symmetric and asymmetric manual materials handling. Part 1: Physiology and psychophysics. , 1989, Ergonomics.

[4]  W. Marras,et al.  An EMG-assisted model of loads on the lumbar spine during asymmetric trunk extensions. , 1993, Journal of biomechanics.

[5]  J. Kelsey,et al.  An epidemiologic study of lifting and twisting on the job and risk for acute prolapsed lumbar intervertebral disc , 1984, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[6]  W S Marras,et al.  Trunk kinematics of one-handed lifting, and the effects of asymmetry and load weight. , 1996, Ergonomics.

[7]  W S Marras,et al.  A stochastic model of trunk muscle coactivation during trunk bending. , 1993, Spine.

[8]  D. Spengler,et al.  Back Injuries in Industry: A Retrospective Study: III. Employee-related Factors , 1986, Spine.

[9]  S. Snook,et al.  A study of three preventive approaches to low back injury. , 1978, Journal of occupational medicine. : official publication of the Industrial Medical Association.

[10]  W S Marras,et al.  Muscle activities during asymmetric trunk angular accelerations , 1990, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[11]  M. Pope,et al.  The relationship between trunk muscle electromyography and lifting moments in the sagittal and frontal planes. , 1987, Journal of biomechanics.

[12]  W. G. Allread,et al.  The Role of Dynamic Three-Dimensional Trunk Motion in Occupationally-Related Low Back Disorders: The Effects of Workplace Factors, Trunk Position, and Trunk Motion Characteristics on Risk of Injury , 1993, Spine.

[13]  G. Andersson,et al.  Quantitative Studies of Back Loads in Lifting , 1976 .

[14]  A Shirazi-Adl,et al.  Finite-Element Evaluation of Contact Loads on Facets of an L2-L3 Lumbar Segment in Complex Loads , 1991, Spine.

[15]  W. Marras,et al.  Spine loading during trunk lateral bending motions. , 1997, Journal of biomechanics.

[16]  K P Granata,et al.  A method for measuring external spinal loads during unconstrained free-dynamic lifting. , 1997, Journal of biomechanics.

[17]  W S Marras,et al.  A Three-Dimensional Motion Model of Loads on the Lumbar Spine: I. Model Structure , 1991, Human factors.

[18]  W S Marras,et al.  Electromyographic studies of the lumbar trunk musculature during the generation of low‐level trunk acceleration , 1993, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[19]  William S. Marras,et al.  Industrial electromyography (EMG) , 1990 .

[20]  W. Marras,et al.  An EMG-assisted model of trunk loading during free-dynamic lifting. , 1995, Journal of biomechanics.

[21]  W. Marras,et al.  A Biomechanical Assessment and Model of Axial Twisting in the Thoracolumbar Spine , 1995, Spine.

[22]  D B Chaffin,et al.  A longitudinal study of low-back pain as associated with occupational weight lifting factors. , 1973, American Industrial Hygiene Association journal.

[23]  W. Marras,et al.  A Three-Dimensional Motion Model of Loads on the Lumbar Spine: II. Model Validation , 1991, Human factors.