Flowability parameters for chopped switchgrass, wheat straw and corn stover

Abstract A direct shear cell to measure the shear strength and flow properties of chopped switchgrass, wheat straw, and corn stover was designed, fabricated, and tested. Yield loci (r2 = 0.99) determined at preconsolidation pressures of 3.80 kPa and 5.02 kPa indicated that chopped biomass followed Mohr–Coulomb failure. Normal stress significantly affected the displacement required for shear failure, as well as the friction coefficient values for all three chopped biomass types. Displacement at shear failure ranged from 30 to 80 mm, and depended on preconsolidation pressure, normal stress, and particle size. Friction coefficient was inversely related to normal stress, and was highest for chopped corn stover. Also, chopped corn stover exhibited the highest angle of internal friction, unconfined yield strength, major consolidation strength, and cohesive strength, all of which indicated increased challenges in handling chopped corn stover. The measured angle of internal friction and cohesive strength indicated that chopped biomass cannot be handled by gravity alone. The measured angle of internal friction and cohesive strength were 43° and 0.75 kPa for chopped switchgrass; 44° and 0.49 kPa for chopped wheat straw; and 48° and 0.82 kPa for chopped corn stover. Unconfined yield strength and major consolidation strength used for characterization of bulk flow materials and design of hopper dimensions were 3.4 and 10.4 kPa for chopped switchgrass; 2.3 and 9.6 kPa for chopped wheat straw and 4.2 and 11.8 kPa for chopped corn stover. These results are useful for the development of efficient handling, storage, and transportation systems for biomass in biorefineries.

[1]  N. Mohsenin.  Physical properties of plant and animal materials , 1970 .

[2]  S. Barringer,et al.  Flow property measurement of food powders and sensitivity of Jenike’s hopper design methodology to the measured values , 2004 .

[3]  Eugene L. Parrott,et al.  Handbook of powder science and technology. By M. E. Fayed and L. Otten, Van Nostrand Reinhold Company, Inc., 135 West 50th Street, New York, NY 10020. 1984. 650 pp. 18 × 26 cm. Price: $79.50 , 1984 .

[4]  M. Peleg,et al.  Physical properties of foods , 1983 .

[5]  Gustavo V. Barbosa-Cánovas,et al.  Food Powders: Physical Properties, Processing, and Functionality , 2005 .

[6]  John J. Fitzpatrick,et al.  Effect of powder properties and storage conditions on the flowability of milk powders with different fat contents , 2004 .

[7]  George D. Hayes,et al.  Food Engineering Data Handbook , 1988 .

[8]  H. B. Manbeck,et al.  Flow properties of powders using four testers — measurement, comparison and assessment , 1993 .

[9]  P. York.  The use of glidants to improve the flowability of fine lactose powder , 1975 .

[10]  Gustavo V. Barbosa-Cánovas,et al.  Flow and shear descriptors of preconsolidated food powders , 2006 .

[11]  Michael Knauf,et al.  Lignocellulosic biomass processing: a perspective. , 2004 .

[12]  G. H. Rong,et al.  Simulation of Flow Behaviour of Bulk Solids in Bins. Part 2: Shear Bands, Flow Corrective Inserts and Velocity Profiles , 1995 .

[13]  Muhammad E. Fayed,et al.  Handbook of Powder Science & Technology , 1997 .

[14]  A. Demirbas,et al.  Biomass resource facilities and biomass conversion processing for fuels and chemicals , 2001 .

[15]  P. Rao.  Statistical Research Methods in the Life Sciences , 1997 .

[16]  J. Schwedes.  Shearing behaviour of slightly compressed cohesive granular materials , 1975 .

[17]  O. O. Fasina,et al.  Flow and physical properties of switchgrass, peanut hull, and poultry litter. , 2006 .

[18]  Frank Taylor,et al.  Determining the Cost of Producing Ethanol from Corn Starch and Lignocellulosic Feedstocks , 2000 .

[19]  Flow Properties Of DDGS with Varying Soluble and Moisture Contents Using Jenike Shear Testing , 2007 .

[20]  D. Schulze,et al.  Standard shear testing technique for particulate solids using the Jenike shear cell : edited by The Institution of Chemical Engineers, Rugby, U.K., 1989; 46 pp. paperback; £16.50 plus postage; ISBN 0 85295 232 5 , 1990 .

[21]  Sahahab Sokhansanj,et al.  Collection and Delivery of Biomass for Fuel and Power Production , 2003 .

[22]  Christopher T. Wright,et al.  Value of Distributed Preprocessing of Biomass Feedstocks to a Bioenergy Industry , 2006 .