Optimization of FIB milling for rapid NEMS prototyping

We demonstrate an optimized milling technique to focused ion beam (FIB) milling in template silicon membranes for fast prototyping of nanoelectromechanical systems (NEMS). Using a single-pass milling strategy the highly topology dependent sputtering rate is boosted and shorter milling time is achieved. Drift independence is obtained for small critical features using a radial scan strategy, and a back scan routine ensures minimal line width deviation removing redeposited material. Milling a design similar to a nano four-point probe with a pitch down to 400nm we display what optimized FIB milling in NEMS development can accomplish.

[1]  R. Hull,et al.  Deep submicron microcontact printing on planar and curved substrates utilizing focused ion beam fabricated printheads , 2001 .

[2]  Dirch Hjorth Petersen,et al.  Customizable in situ TEM devices fabricated in freestanding membranes by focused ion beam milling , 2010, Nanotechnology.

[3]  P. Hawkes,et al.  Exploration of the ultimate patterning potential achievable with high resolution focused ion beams , 2005 .

[4]  Adrian M. Ionescu,et al.  Conduction in ultra-thin SOI nanowires prototyped by FIB milling , 2006 .

[5]  K J Briston,et al.  Fabrication of a novel SEM microgripper by electrochemical and FIB techniques , 2009 .

[6]  Luigi Occhipinti,et al.  Manipulation and in situ transmission electron microscope characterization of sub-100 nm nanostructures using a microfabricated nanogripper , 2010 .

[7]  Hideo Namatsu,et al.  Nano-Four-Point Probes on Microcantilever System Fabricated by Focused Ion Beam , 2003 .

[8]  Gilles Patriarche,et al.  Sub-5nm FIB direct patterning of nanodevices , 2007 .

[9]  Klaus Edinger,et al.  Focused ion beam sputter yield change as a function of scan speed , 1997 .

[10]  Peter Günter,et al.  Photonic crystal structures in ion-sliced lithium niobate thin films. , 2009, Optics express.

[11]  P. Bøggild,et al.  Fundamental size limitations of micro four-point probes , 2009 .

[12]  D. Stickler,et al.  Sputter yields of single-and polycrystalline metals for application in focused ion beam technology , 2009 .

[13]  Robert Puers,et al.  A review of focused ion beam applications in microsystem technology , 2001 .

[14]  M. Y. Ali,et al.  Characterisation of surface texture using AFM with trimmed probe tip , 2006 .

[15]  J. Giérak,et al.  Focused Ion Beam Micro- and Nanoengineering , 2007 .