Korean high heat flux test facility by using electron beam system for ITER first wall semi-prototype

[1]  Dong Won Lee,et al.  Fabrication and high heat flux test of large mockups for ITER first wall semi-prototype , 2011 .

[2]  Dong Won Lee,et al.  Heat flux tests of the ITER first Wall qualification mockups at KoHLT-1 , 2011 .

[3]  Y. Jung,et al.  Ion-beam assisted deposition of coating interlayers for the joining of Be/CuCrZr , 2010 .

[4]  Dong Won Lee,et al.  Overview of Korea heat load test facilities for plasma facing components , 2010 .

[5]  Dong Won Lee,et al.  Experiment and analysis of hypervapotron mock-ups for preparing the 2nd qualification of the ITER blanket first wall , 2010 .

[6]  Dong Won Lee,et al.  Design evaluation of the semi-prototype for the ITER blanket first wall qualification , 2010 .

[7]  Dong Won Lee,et al.  High Heat Flux Test with HIP Bonded 50x50 Be/Cu Mock-Ups for the ITER First Wall , 2009 .

[8]  Dong Won Lee,et al.  Development of a High Heat Flux Test Facility for Plasma Facing Components , 2009 .

[9]  Dong Won Lee,et al.  Fabrication of Be/CuCrZr/SS mock-ups for ITER first wall , 2009 .

[10]  I. Mazul,et al.  Development of fabrication technology and investigation of properties of steel-to-bronze joints suggested for ITER HHF components , 2009 .

[11]  Dong Won Lee,et al.  High heat flux test with HIP bonded Be/Cu mock-ups for the ITER first wall , 2008, 2009 23rd IEEE/NPSS Symposium on Fusion Engineering.

[12]  J. M. McDonald,et al.  The Sandia Plasma Materials Test Facility in 2007 , 2008 .

[13]  R. Duwe,et al.  The new electron beam test facility JUDITH II for high heat flux experiments on plasma facing components , 2005 .

[14]  F. Escourbiac,et al.  Testing of actively cooled mock-ups in several high heat flux facilities—An International Round Robin Test , 2005 .