Optimal polarization modulation for orthogonal two-axis Lloyd's mirror interference lithography.

Polarization control is of vital importance in two-axis Lloyd's mirror interference lithography to achieve the preferred interference fringes. In this work, we first establish a three-dimensional polarization ray-tracing model to trace the evolution of polarization states of incident beams through the corner-cube-like interferometer unit of an orthogonal two-axis Lloyd's mirror interferometer. With the established model, we then derive the optimal combination of initial polarization directions of the incident beams according to the orthogonality of polarization states and the contrast of interference fringes. The comparison between the simulated and experimental interference fringes obtained under different combinations of initial polarization states of incident beams verify the feasibility of the established model and the achieved optimal polarization modulation.

[1]  R M A Azzam.  Three-dimensional polarization states of monochromatic light fields. , 2011, Journal of the Optical Society of America. A, Optics, image science, and vision.

[2]  William T. Estler,et al.  Measurement technologies for precision positioning , 2015 .

[3]  Wei Gao,et al.  A six-degree-of-freedom surface encoder for precision positioning of a planar motion stage , 2013 .

[4]  Yuichi Okazaki,et al.  Precision nano-fabrication and evaluation of a large area sinusoidal grid surface for a surface encoder , 2003 .

[5]  W. S. Blackley,et al.  Ductile-regime machining model for diamond turning of brittle materials , 1991 .

[6]  Lijiang Zeng,et al.  Method to fabricate orthogonal crossed gratings based on a dual Lloyd's mirror interferometer , 2016 .

[7]  J. Homola,et al.  Flexible method based on four-beam interference lithography for fabrication of large areas of perfectly periodic plasmonic arrays. , 2014, Optics express.

[8]  Hung-Lin Hsieh,et al.  Development of a grating-based interferometer for six-degree-of-freedom displacement and angle measurements. , 2015, Optics express.

[9]  Garam Yun,et al.  Three-dimensional polarization ray-tracing calculus I: definition and diattenuation. , 2011, Applied optics.

[10]  R. Jones.  A New Calculus for the Treatment of Optical SystemsI. Description and Discussion of the Calculus , 1941 .

[11]  Nadine Geyer,et al.  Three-beam interference lithography: upgrading a Lloyd's interferometer for single-exposure hexagonal patterning. , 2009, Optics letters.

[12]  Lijiang Zeng,et al.  A sub-nanometric three-axis surface encoder with short-period planar gratings for stage motion measurement , 2012 .

[13]  C. Lu,et al.  Interference lithography: a powerful tool for fabricating periodic structures , 2010 .

[14]  Wei Gao,et al.  A two-axis Lloyd's mirror interferometer for fabrication of two-dimensional diffraction gratings , 2014 .

[15]  G. Whitesides,et al.  Using an elastomeric phase mask for sub-100 nm photolithography in the optical near field , 1997 .

[16]  Wei Gao,et al.  Influences of misalignment errors of optical components in an orthogonal two-axis Lloyd's mirror interferometer. , 2016, Optics express.

[17]  R. Fabian Pease,et al.  Semiconductor technology: Imprints offer Moore , 2002, Nature.

[18]  George R. Harrison,et al.  The Production of Diffraction GratingsI. Development of the Ruling Art , 1949 .