Thermoelectric properties of PEDOT nanowire/PEDOT hybrids.

UNLABELLED Freestanding poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires were synthesized by template-confined in situ polymerization, and then integrated into polystyrene sulfonate (PSS)-doped PEDOT and tosylate-doped PEDOT hosts, respectively. The hybrid morphologies were characterized by atomic force microscopy, indicating the homogeneous dispersion of PEDOT nanowires. The thermoelectric properties of the resultant hybrids were measured, and the power factor was found to be enhanced by 9-fold in comparison with PEDOT PSS mixed with 5 vol% dimethyl sulfoxide while the low thermal conductivity was still maintained. Such a significant improvement could be attributed to the synergistic effects of interfacial energy filtering, component contributions, and changes of carrier concentrations in the host materials. Upon addition of 0.2 wt% PEDOT nanowires, the resultant composites demonstrated a power factor as high as 446.6 μW m(-1) K(-2) and the thermoelectric figure of merit could reach 0.44 at room temperature. The thermoelectric devices were investigated by using the PEDOT nanowire/PEDOT hybrid as a p-type leg and nitrogen-doped graphene as an n-type leg. The normalized power output was as high as ∼0.5 mW m(-2) for a temperature gradient of ΔT = 10.1 °C, indicating great potential for practical applications. These findings open up a new route towards high-performance organic thermoelectric materials and devices.

[1]  S. Foulger,et al.  Facile synthesis of poly(3,4-ethylenedioxythiophene) nanofibers from an aqueous surfactant solution. , 2006, Small.

[2]  L. Hope-weeks,et al.  Thermoelectric properties of porous multi-walled carbon nanotube/polyaniline core/shell nanocomposites , 2012, Nanotechnology.

[3]  Kevin C. See,et al.  Effect of Interfacial Properties on Polymer–Nanocrystal Thermoelectric Transport , 2013, Advanced materials.

[4]  Choongho Yu,et al.  Improved thermoelectric behavior of nanotube-filled polymer composites with poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate). , 2010, ACS nano.

[5]  X. Crispin,et al.  Tuning the thermoelectric properties of conducting polymers in an electrochemical transistor. , 2012, Journal of the American Chemical Society.

[6]  Choongho Yu,et al.  Air-stable fabric thermoelectric modules made of N- and P-type carbon nanotubes , 2012 .

[7]  D. Moses,et al.  Experimental determination of the thermal conductivity of a conducting polymer: Pure and heavily doped polyacetylene , 1984 .

[8]  Shiren Wang,et al.  Thermoelectric performance of p-type nanohybrids filled polymer composites , 2015 .

[9]  A. Popescu,et al.  Model of transport properties of thermoelectric nanocomposite materials , 2009 .

[10]  Kevin P. Pipe,et al.  Thermoelectric model to characterize carrier transport in organic semiconductors , 2012 .

[11]  H. Anno,et al.  Novel Hybrid Organic Thermoelectric Materials:Three‐Component Hybrid Films Consisting of a Nanoparticle Polymer Complex, Carbon Nanotubes, and Vinyl Polymer , 2015, Advanced materials.

[12]  M. Kemerink,et al.  Correcting for contact geometry in Seebeck coefficient measurements of thin film devices , 2014 .

[13]  Wenqing Zhang,et al.  Enhanced thermoelectric performance of single-walled carbon nanotubes/polyaniline hybrid nanocomposites. , 2010, ACS nano.

[14]  Baoyang Lu,et al.  Thermoelectric Performance of Poly(3,4-ethylenedioxythiophene): Poly(styrenesulfonate) , 2008 .

[15]  Eunkyoung Kim,et al.  Flexible PEDOT electrodes with large thermoelectric power factors to generate electricity by the touch of fingertips , 2013 .

[16]  M. Chabinyc,et al.  Impact of the Doping Method on Conductivity and Thermopower in Semiconducting Polythiophenes , 2015 .

[17]  A. Cantarero,et al.  Enhanced thermoelectric performance of PEDOT with different counter-ions optimized by chemical reduction , 2014 .

[18]  Takao Ishida,et al.  Morphological Change and Mobility Enhancement in PEDOT:PSS by Adding Co‐solvents , 2013, Advanced materials.

[19]  E. Pop,et al.  Thermal conductance of an individual single-wall carbon nanotube above room temperature. , 2005, Nano letters.

[20]  Lawrence T. Drzal,et al.  Templated growth of polyaniline on exfoliated graphene nanoplatelets (GNP) and its thermoelectric properties , 2012 .

[21]  Choongho Yu,et al.  Fully Organic Nanocomposites with High Thermoelectric Power Factors by using a Dual‐Stabilizer Preparation , 2013 .

[22]  Seong Ihl Woo,et al.  Thermoelectric properties of nanocomposite thin films prepared with poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) and graphene. , 2012, Physical chemistry chemical physics : PCCP.

[23]  Magnus Berggren,et al.  Semi-metallic polymers. , 2014, Nature materials.

[24]  X. Crispin,et al.  Significant Electronic Thermal Transport in the Conducting Polymer Poly(3,4‐ethylenedioxythiophene) , 2015, Advanced materials.

[25]  F. S. Kim,et al.  Enhanced thermoelectric properties of PEDOT:PSS nanofilms by a chemical dedoping process , 2014 .

[26]  이승환,et al.  Novel solution-processable, dedoped semiconductors for application in thermoelectric devices , 2014 .

[27]  Changhong Liu,et al.  A Promising Approach to Enhanced Thermoelectric Properties Using Carbon Nanotube Networks , 2010, Advanced materials.

[28]  J. Bahk,et al.  Electron energy filtering by a nonplanar potential to enhance the thermoelectric power factor in bulk materials , 2013 .

[29]  Y. Kim,et al.  Highly Conductive PEDOT:PSS Electrode with Optimized Solvent and Thermal Post‐Treatment for ITO‐Free Organic Solar Cells , 2011 .

[30]  Thomas L. Bougher,et al.  High thermal conductivity of chain-oriented amorphous polythiophene. , 2014, Nature nanotechnology.

[31]  Peter J. Murphy,et al.  Ultrathin polymer films for transparent electrode applications prepared by controlled nucleation. , 2013, ACS applied materials & interfaces.

[32]  C. N. Lau,et al.  Superior thermal conductivity of single-layer graphene. , 2008, Nano letters.

[33]  Zhong-Zhen Yu,et al.  The effect of graphite oxide on the thermoelectric properties of polyaniline , 2012 .

[34]  Miguel Muñoz Rojo,et al.  Decrease in thermal conductivity in polymeric P3HT nanowires by size-reduction induced by crystal orientation: new approaches towards thermal transport engineering of organic materials. , 2014, Nanoscale.

[35]  Limin Wang,et al.  Abnormally enhanced thermoelectric transport properties of SWNT/PANI hybrid films by the strengthened PANI molecular ordering , 2014 .

[36]  Choongho Yu,et al.  Flexible power fabrics made of carbon nanotubes for harvesting thermoelectricity. , 2014, ACS nano.

[37]  A. Carella,et al.  r of acid doped highly conductive polymers † , 2014 .

[38]  Kevin C. See,et al.  Water-processable polymer-nanocrystal hybrids for thermoelectrics. , 2010, Nano letters.

[39]  Choongho Yu,et al.  Thermoelectric behavior of segregated-network polymer nanocomposites. , 2008, Nano letters.

[40]  Gang Chen,et al.  Bulk nanostructured thermoelectric materials: current research and future prospects , 2009 .

[41]  P. Ma,et al.  Correlations between Percolation Threshold, Dispersion State, and Aspect Ratio of Carbon Nanotubes , 2007 .

[42]  K. Ho,et al.  Highly conductive PEDOT:PSS electrode by simple film treatment with methanol for ITO-free polymer solar cells , 2012 .

[43]  K. Zhang,et al.  Engineered doping of organic semiconductors for enhanced thermoelectric efficiency. , 2013, Nature materials.

[44]  Zhiqun Lin,et al.  Thermopower enhancement in conducting polymer nanocomposites via carrier energy scattering at the organic–inorganic semiconductor interface , 2012 .

[45]  Daoben Zhu,et al.  Organic Thermoelectric Materials and Devices Based on p‐ and n‐Type Poly(metal 1,1,2,2‐ethenetetrathiolate)s , 2012, Advanced materials.

[46]  Jun Liu,et al.  Thermal Conductivity and Elastic Constants of PEDOT:PSS with High Electrical Conductivity , 2015 .

[47]  J. Hsu,et al.  Completely Organic Multilayer Thin Film with Thermoelectric Power Factor Rivaling Inorganic Tellurides , 2015, Advanced materials.

[48]  S. Chandrasekhar.  Liquid Crystals: Cholesteric liquid crystals , 1992 .

[49]  G. J. Snyder,et al.  Complex thermoelectric materials. , 2008, Nature materials.

[50]  Ali Shakouri,et al.  Nanostructured Thermoelectrics: Big Efficiency Gains from Small Features , 2010, Advanced materials.

[51]  K. Winey,et al.  Simulations and generalized model of the effect of filler size dispersity on electrical percolation in rod networks , 2012 .

[52]  Guanghao Lu,et al.  Bulk Interpenetration Network of Thermoelectric Polymer in Insulating Supporting Matrix , 2014, Advanced materials.

[53]  S. Faleev,et al.  Theory of enhancement of thermoelectric properties of materials with nanoinclusions , 2008, 0807.0260.

[54]  H. Sirringhaus,et al.  Modulated Thermoelectric Properties of Organic Semiconductors Using Field‐Effect Transistors , 2015 .

[55]  Tae‐Woo Lee,et al.  Control of the Surface Composition of a Conducting‐Polymer Complex Film to Tune the Work Function , 2008 .

[56]  Brian M. Foley,et al.  Thin Film Thermoelectric Metal–Organic Framework with High Seebeck Coefficient and Low Thermal Conductivity , 2015, Advanced materials.

[57]  F. E. Karasz,et al.  Thermoelectric studies of oligophenylenevinylene segmented block copolymers and their blends with MEH-PPV , 2013 .

[58]  P. McEuen,et al.  Thermal transport measurements of individual multiwalled nanotubes. , 2001, Physical Review Letters.

[59]  X. Crispin,et al.  Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene). , 2011, Nature materials.