Synthetic jet actuators for heat transfer enhancement – A critical review
暂无分享,去创建一个
[1] U. Ingard,et al. Acoustic Circulation Effects and the Nonlinear Impedance of Orifices , 1950 .
[2] J. Sullivan,et al. On the stability of vortex rings , 1973, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.
[3] N. Didden. On the formation of vortex rings: Rolling-up and production of circulation , 1979 .
[4] R. Blevins,et al. Formulas for natural frequency and mode shape , 1984 .
[5] A. Glezer. The formation of vortex rings , 1988 .
[6] F. Hussain,et al. Elliptic jets. Part 1. Characteristics of unexcited and excited jets , 1989, Journal of Fluid Mechanics.
[7] O. J. Hahn,et al. Spray cooling of power electronics at cryogenic temperatures , 1994 .
[8] K. Zaman. Axis switching and spreading of an asymmetric jet: Role of vorticity dynamics , 1995 .
[9] L. T. Yeh,et al. Review of Heat Transfer Technologies in Electronic Equipment , 1995 .
[10] J. Fleurial,et al. Thermal management of power electronics using thermoelectric coolers , 1996, Fifteenth International Conference on Thermoelectrics. Proceedings ICT '96.
[11] R. Schaller,et al. Moore's law: past, present and future , 1997 .
[12] J. Campbell. Establishment of an analytical and experimental test facility for the evaluation of thermal management in microelectric packages , 1997 .
[13] M. Gharib,et al. A universal time scale for vortex ring formation , 1998, Journal of Fluid Mechanics.
[14] W. Z. Black,et al. Thermal management of a laptop computer with synthetic air microjets , 1998, ITherm'98. Sixth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.98CH36208).
[15] Milton Ohring,et al. Reliability and Failure of Electronic Materials and Devices, Second Edition , 1998 .
[16] A. Glezer,et al. The formation and evolution of synthetic jets , 1998 .
[17] S. G. Mallinson,et al. Some characteristics of synthetic jets , 1999 .
[18] A. Glezer,et al. Controlled interactions of adjacent synthetic jets , 1999 .
[19] A. Kurdila,et al. Synthetic jets, their reduced order modeling and applications to flow control , 1999 .
[20] S. G. Mallinson,et al. The operation and application of synthetic jet actuators , 2000 .
[21] R. E. Simons,et al. Application of thermoelectric cooling to electronic equipment: a review and analysis , 2000, Sixteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.00CH37068).
[22] A. Crook,et al. Measurements and visualisations of synthetic jets , 2001 .
[23] Barton L Smith,et al. Synthetic jets at large Reynolds number and comparison to continuous jets , 2001 .
[24] A. Glezer,et al. Synthetic jet based active heat sink for electronic cooling , 2001 .
[25] Issam Mudawar. Assessment of high-heat-flux thermal management schemes , 2001 .
[26] R. Mittal,et al. Interaction of a Synthetic Jet with a Flat Plate Boundary Layer , 2001 .
[27] M. Amitay,et al. SYNTHETIC JETS , 2001 .
[28] S. G. Mallinson,et al. An experimental and numerical study of synthetic jet flow , 2001, The Aeronautical Journal (1968).
[29] Ari Glezer,et al. Air cooled heat sinks integrated with synthetic jets , 2002, ITherm 2002. Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Cat. No.02CH37258).
[30] Chandrakant D. Patel,et al. Design and performance evaluation of a compact thermosyphon , 2002 .
[31] R. Bryant,et al. Piezoelectric Actuators for Synthetic Jet Applications , 2003 .
[32] S. G. Mallinson,et al. Numerical simulation of micro-fabricated zero mass-flux jet actuators , 2003 .
[33] M. Allen,et al. Microjet cooling devices for thermal management of electronics , 2003 .
[34] R. Holman,et al. A Jet Formation Criterion for Synthetic Jet Actuators , 2003 .
[35] A. Glezer,et al. Thermal management using synthetic jet ejectors , 2004, IEEE Transactions on Components and Packaging Technologies.
[36] M. Patterson,et al. Stacked Microchannel Heat Sinks for Liquid Cooling of Microelectronics , 2004 .
[37] S. G. Mallinson,et al. Three-dimensional numerical simulations of synthetic jet actuator flows in a microchannel , 2004, SPIE Micro + Nano Materials, Devices, and Applications.
[38] Y. Maydanik,et al. Miniature loop heat pipes - a promising means for cooling electronics , 2005, The Ninth Intersociety Conference on Thermal and Thermomechanical Phenomena In Electronic Systems (IEEE Cat. No.04CH37543).
[39] Mehmet Arik,et al. Thermal management of LEDs: package to system , 2004, SPIE Optics + Photonics.
[40] Joel W. Burdick,et al. Synthetic Jet Propulsion for Small Underwater Vehicles , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.
[41] A. Glezer,et al. Design and Thermal Characteristics of a Synthetic Jet Ejector Heat Sink , 2005 .
[42] A. Glezer,et al. Vectoring of Adjacent Synthetic Jets , 2005 .
[43] Jemmy S. Bintoro,et al. A closed-loop electronics cooling by implementing single phase impinging jet and mini channels heat exchanger , 2005 .
[44] Poorna Mane,et al. Synthetic jets with piezoelectric diaphragms , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.
[45] R. Holman,et al. Formation Criterion for Synthetic Jets , 2005 .
[46] R.C. Pfahl,et al. The 2004 International Electronics Manufacturing Initiative (iNEMI) Technology Roadmaps , 2005, 2005 Conference on High Density Microsystem Design and Packaging and Component Failure Analysis.
[47] W. Z. Black,et al. Local Convective Heat Transfer From a Constant Heat Flux Flat Plate Cooled by Synthetic Air Jets , 2006 .
[48] M. Amitay,et al. Electronic Cooling Using Synthetic Jet Impingement , 2006 .
[49] Dong Liu,et al. On-Chip Thermal Management With Microchannel Heat Sinks and Integrated Micropumps , 2006, Proceedings of the IEEE.
[50] R. Mahalingam,et al. Newisys server processor cooling augmentation using synthetic jet ejectors , 2006, Thermal and Thermomechanical Proceedings 10th Intersociety Conference on Phenomena in Electronics Systems, 2006. ITHERM 2006..
[51] A. Glezer,et al. A high-speed, compressible synthetic jet , 2006 .
[52] S. Zhong,et al. The performance of round synthetic jets in quiescent flow , 2006, The Aeronautical Journal (1968).
[53] Mehmet Arik,et al. An investigation into feasibility of impingement heat transfer and acoustic abatement of meso scale synthetic jets , 2007 .
[54] D. Smith,et al. Experimental study of the formation and scaling of a round synthetic jet , 2007 .
[55] Hui Tang,et al. A static compressible flow model of synthetic jet actuators , 2007, The Aeronautical Journal (1968).
[56] Rajnish N. Sharma,et al. Some Insights into Synthetic Jet Actuation From Analytical Modelling , 2007 .
[57] J. Thome,et al. State of the Art of High Heat Flux Cooling Technologies , 2007 .
[58] V. Timchenko,et al. An evaluation of synthetic jets for heat transfer enhancement in air cooled micro‐channels , 2007 .
[59] Jungho Kim. Spray cooling heat transfer: The state of the art , 2007 .
[60] W. Quinn. Experimental study of the near field and transition region of a free jet issuing from a sharp-edged elliptic orifice plate , 2007 .
[61] I. Mudawar,et al. Two-phase spray cooling of hybrid vehicle electronics , 2008, 2008 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.
[62] M. Arik. Local Heat Transfer Coefficients of a High-Frequency Synthetic Jet during Impingement Cooling over Flat Surfaces , 2008 .
[63] A. Agrawal,et al. Near-Field Measurements and Cavity Design for Synthetic Jets , 2008 .
[64] Velraj Ramalingam,et al. Thermal management of electronics: A review of literature , 2008 .
[65] S. Zhong,et al. The near wall effect of synthetic jets in a boundary layer , 2008 .
[66] M. Arik,et al. Interaction of a synthetic jet with an actively cooled heat sink , 2008, 2008 11th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.
[67] M. Arik,et al. Effect of Synthetic Jets Over Natural Convection Heat Sinks , 2008 .
[68] R. Dougal,et al. Experimental Heat Transfer Enhancement for Single Phase Liquid Micro-Channel Cooling Using a Micro-Synthetic Jet Actuator , 2009 .
[69] T. Persoons,et al. Heat Transfer in Adjacent Interacting Impinging Synthetic Jets , 2009 .
[70] A. Agrawal,et al. Frequency response of a synthetic jet cavity , 2009 .
[71] T. Chandratilleke,et al. Performance analysis of a synthetic jet-microchannel hybrid heat sink for electronic cooling , 2009, 2009 11th Electronics Packaging Technology Conference.
[72] T. Persoons,et al. Heat transfer mechanisms in an impinging synthetic jet for a small jet-to-surface spacing , 2009 .
[73] Experimental Heat Transfer Enhancement in Single-Phase Liquid Microchannel Cooling With Cross-Flow Synthetic Jet , 2010 .
[74] A. Agrawal,et al. Effect of orifice shape in synthetic jet based impingement cooling , 2010 .
[75] A. Agrawal,et al. Heat Transfer Analysis in a Rectangular Duct Without and With Cross-Flow and an Impinging Synthetic Jet , 2010, IEEE Transactions on Components and Packaging Technologies.
[76] A. Agrawal,et al. Heat transfer characteristics of synthetic jet impingement cooling , 2010 .
[77] T. Chandratilleke,et al. Heat transfer enhancement in microchannels with cross-flow synthetic jets , 2010 .
[78] Unsteady flow and heat transfer analysis of an impinging synthetic jet , 2011 .
[79] B. Hoefflinger. ITRS: The International Technology Roadmap for Semiconductors , 2011 .
[80] A. Ortega,et al. CFD Analysis of the Vortex Dynamics Generated by a Synthetic Jet Impinging on a Heated Surface , 2011 .
[81] T. Persoons,et al. A general correlation for the stagnation point Nusselt number of an axisymmetric impinging synthetic jet , 2011 .
[82] A. Agrawal,et al. A numerical investigation of effects of cavity and orifice parameters on the characteristics of a synthetic jet flow , 2011 .
[83] A. Ortega,et al. Numerical Simulation of Local Heat Transfer and Scaling of a Synthetic Impinging Jet in a Canonical Geometry , 2011 .
[84] A. Agrawal,et al. Multiple orifice synthetic jet for improvement in impingement heat transfer. , 2011 .
[85] G. Yeoh,et al. Forced Convection in Micro-Channel With Synthetic Jet: Effect of Operating Frequency , 2012 .
[86] G. Yeoh,et al. Three-dimensional modelling of fluid flow and heat transfer in micro-channels with synthetic jet , 2012 .
[87] Tijs Van Oevelen,et al. Effect of Flow Pulsation on the Heat Transfer Performance of a Minichannel Heat Sink , 2012 .
[88] M. Zhang,et al. Heat Transfer Enhancement by Synthetic Jet Arrays in Air-Cooled Heat Sinks for Use in Electronics Cooling , 2012 .
[89] Tim Persoons,et al. General Reduced-Order Model to Design and Operate Synthetic Jet Actuators , 2012 .
[90] M. Arik,et al. Comparison of synthetic and steady air jets for impingement heat transfer over vertical surfaces , 2012, 13th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems.
[91] Wei Jiang,et al. THE EFFECTS OF A CROSS-FLOW SYNTHETIC JET ON SINGLE-PHASE MICROCHANNEL HEAT TRANSFER , 2012 .
[92] Luis Silva,et al. Experiments and Simulation of an Impinging Synthetic Jet Designed to Eliminate Actuator Artifacts , 2012 .
[93] A. Agrawal,et al. Heat Transfer Characteristics of a Heat Sink in Presence of a Synthetic Jet , 2012, IEEE Transactions on Components, Packaging and Manufacturing Technology.
[94] M. Arik,et al. Predicting Heat Transfer From Unsteady Synthetic Jets , 2012 .
[95] T. Persoons,et al. Heat transfer characteristics of a pair of impinging synthetic jets: Effect of orifice spacing and impingement distance , 2012 .
[96] Dibakar Rakshit,et al. A synthetic jet heat sink with cross-flow for electronic cooling , 2013, 2013 14th International Conference on Electronic Packaging Technology.
[97] A. Ortega,et al. Convective Heat Transfer in an Impinging Synthetic Jet: A Numerical Investigation of a Canonical Geometry , 2013 .
[98] A. Agrawal,et al. Acoustic and heat transfer aspects of an inclined impinging synthetic jet , 2013 .
[99] A. Ortega,et al. Experimental Study of the Convective Heat Transfer From a Geometrically Scaled Up 2D Impinging Synthetic Jet , 2013 .
[100] Terrence W. Simon,et al. Heat Transfer Enhancement of a Heat Sink by Inclined Synthetic Jets for Electronics Cooling , 2013 .
[101] İ. Özkul,et al. Experimental investigation of convective heat transfer on a flat plate subjected to a transversely synthetic jet , 2013 .
[102] Active Heat Transfer Enhancement in Single-Phase Microchannels by Using Synthetic Jets , 2013 .
[103] T. Persoons,et al. Flow regime characterisation of an impinging axisymmetric synthetic jet , 2013 .
[104] Tilak T. Chandratilleke,et al. Thermal performance of a double-action pulsed jet CPU cooler , 2013, 2013 IEEE 15th Electronics Packaging Technology Conference (EPTC 2013).
[105] Jingzhou Zhang,et al. Flow and heat transfer characteristics under synthetic jets impingement driven by piezoelectric actuator , 2013 .
[106] R. Fang,et al. Suppression of Two-Phase Flow Instabilities in Parallel Microchannels by Using Synthetic Jets , 2013 .
[107] Kwan-Soo Lee,et al. Flow characteristics of dual piezoelectric cooling jets for cooling applications in ultra-slim electronics , 2014 .
[108] A. Agrawal,et al. Acoustic and heat transfer characteristics of an impinging elliptical synthetic jet generated by acoustic actuator , 2014 .
[109] T. O'Donovan,et al. The effects of stroke length and Reynolds number on heat transfer to a ducted confined and semi-confined synthetic air jet , 2014 .
[110] Zhang Hainan,et al. Free cooling of data centers: A review , 2014 .
[111] Raghav Mahalingam,et al. Ultrathin synthetic jets for thermal management of consumer electronics , 2014, 2014 Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM).
[112] Randeep Singh,et al. Air Impingement Cooling by Synthetic Jet , 2014 .
[113] A. Ianiro,et al. Time and phase average heat transfer in single and twin circular synthetic impinging air jets , 2014 .
[114] A. Agrawal,et al. Interferometry based whole-field heat transfer measurements of an impinging turbulent synthetic jet☆ , 2014 .
[115] M. Arik,et al. Effect of actuator deflection on heat transfer for low and high frequency synthetic jets , 2014, Fourteenth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).
[116] M. Arik,et al. An investigation into momentum and temperature fields of a meso-scale synthetic jet , 2014, Fourteenth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).
[117] R. Mahalingam. Air Cooling for LED Lighting , 2014 .
[118] T. Persoons,et al. Experimental Optimisation of the Thermal Performance of Impinging Synthetic Jet Heat Sinks , 2014 .
[119] K. Mohseni,et al. Synthetic Jets: Fundamentals and Applications , 2014 .
[120] M. Arik,et al. Heat transfer characteristics of impinging steady and synthetic jets over vertical flat surface , 2015 .
[121] Alfonso Capozzoli,et al. Cooling Systems in Data Centers: State of Art and Emerging Technologies , 2015 .
[122] M. Arik,et al. A Computational and Experimental Investigation of Synthetic Jets for Cooling of Electronics , 2015 .
[123] An experimental study of impinging synthetic jets for heat transfer augmentation , 2015 .
[124] T. Persoons,et al. Heat transfer and flow characteristics of a pair of adjacent impinging synthetic jets , 2015 .
[125] A. Agrawal,et al. Proper cavity shape can mitigate confinement effect in synthetic jet impingement cooling , 2015 .
[126] Randeep Singh,et al. Cooling Performance Evaluation of Synthetic Jet Based Thermal Solution Module , 2015 .
[127] G. Xie,et al. An experimental investigation on comparison of synthetic and continuous jets impingement heat transfer , 2015 .
[128] A. Ortega,et al. Experimental convective heat transfer in a geometrically large two-dimensional impinging synthetic jet , 2015 .
[129] M. Chaudhari,et al. Heat transfer and acoustic study of impinging synthetic jet using diamond and oval shape orifice , 2015 .
[130] T. O'Donovan,et al. Heat transfer enhancement to an array of synthetic air jets by an induced crossflow , 2016 .
[131] Chi-Chuan Wang,et al. Heat transfer enhancement of an impinging synthetic air jet using diffusion-shaped orifice , 2016 .
[132] M. Chaudhari,et al. Experimental study on heat transfer characteristics of a heat sink with multiple-orifice synthetic jet , 2016 .
[133] T. Jeng,et al. Experimental study of mixed convection heat transfer on the heated plate with the circular-nozzle synthetic jet , 2016 .
[134] Z. Xia,et al. Flow field and heat transfer characteristics of impingement based on a vectoring dual synthetic jet actuator , 2016 .
[135] Luis Silva-Llanca,et al. Two-dimensional numerical analysis of a low-re turbulent impinging synthetic jet , 2016, 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).
[136] J. Copetti,et al. Experimental study of synthetic jets with rectangular orifice for electronic cooling , 2016 .
[137] M. Arik,et al. Heat Transfer Impact of Synthetic Jets for Air-Cooled Array of Fins , 2016 .
[138] Mehmet Arik,et al. An investigation into flow and heat transfer of an ultrasonic micro-blower device for electronics cooling applications , 2016 .
[139] M. Zhang,et al. Enhanced heat transfer of heat sink channels with micro pin fin roughened walls , 2016 .
[140] M. Arik,et al. An investigation into flow and heat transfer for a slot impinging synthetic jet , 2016 .
[141] Replicating impinging synthetic jets as a train of consecutive viscous Lamb-Ossen vortex pairs , 2016, 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).
[142] T. Astarita,et al. Investigation of impinging single and twin circular synthetic jets flow field , 2016 .
[143] Mehmet Arik,et al. Predicting Heat Transfer for Low- and High-Frequency Central-Orifice Synthetic Jets , 2016, IEEE Transactions on Components, Packaging and Manufacturing Technology.
[144] T. Murugan,et al. Recent Developments on Synthetic Jets (Review Paper) , 2016 .
[145] H. Ali,et al. Thermal performance of phase change material (PCM) based pin-finned heat sinks for electronics devices: Effect of pin thickness and PCM volume fraction , 2017 .
[146] H. Ali,et al. Experimental investigation of n-eicosane based circular pin-fin heat sinks for passive cooling of electronic devices , 2017 .
[147] H. Ali,et al. Experimental passive electronics cooling: Parametric investigation of pin-fin geometries and efficient phase change materials , 2017 .
[148] S. M. Sohel Murshed,et al. A critical review of traditional and emerging techniques and fluids for electronics cooling , 2017 .
[149] Vortex dynamics and mechanisms of heat transfer enhancement in synthetic jet impingement , 2017 .
[150] N. Drăghici,et al. Comparison of synthetic air jet vs. passive heat sinks for cooling COB LED modules , 2017, 2017 40th International Spring Seminar on Electronics Technology (ISSE).
[151] F. Plourde,et al. Influence of Reynolds number synthetic jet dynamic in crossflow configuration on heat transfer enhancement , 2018 .
[152] W. Yan,et al. An experimental study of enhanced heat sinks for thermal management using n-eicosane as phase change material , 2018 .
[153] M. K. Abdullah,et al. Heat Transfer Performance of a Synthetic Jet at Various Driving Frequencies and Diaphragm Amplitude , 2018, Arabian Journal for Science and Engineering.
[154] M. Arik,et al. An Investigation of Performance of Synthetic Jets Emanating from Circular, Elliptical and Rectangular Nozzles , 2018, 2018 17th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm).
[155] M. Jabbal,et al. Experimental investigation of PCM based round pin-fin heat sinks for thermal management of electronics: Effect of pin-fin diameter , 2018 .
[156] F. Plourde,et al. Influence of multi-perforation synthetic jet configuration on heat transfer enhancement , 2018, International Journal of Heat and Mass Transfer.
[157] M. Hatami,et al. Investigation of geometry and dimensionless parameters effects on the flow field and heat transfer of impingement synthetic jets , 2018 .
[158] M. Zhang,et al. Active heat sink with piezoelectric translational agitators, piezoelectric synthetic jets, and micro pin fin arrays , 2018, Experimental Thermal and Fluid Science.
[159] A. Ianiro,et al. Effects of the stroke length and nozzle-to-plate distance on synthetic jet impingement heat transfer , 2018 .
[160] H. Ali,et al. Thermal performance of LHSU for electronics under steady and transient operations modes , 2018, International Journal of Heat and Mass Transfer.
[161] M. Jabbal,et al. Thermal management of electronics devices with PCMs filled pin-fin heat sinks: A comparison , 2018 .
[162] H. Ali,et al. An experimental study of PCM based finned and un-finned heat sinks for passive cooling of electronics , 2018, Heat and Mass Transfer.
[163] P. Gil. Synthetic jet Reynolds number based on reaction force measurement , 2018, Journal of Fluids and Structures.
[164] M. Jabbal,et al. A review on graphene based nanofluids: Preparation, characterization and applications , 2019, Journal of Molecular Liquids.