P2 – Type Na0.67Mn0.8Cu0.1Mg0.1O2 as a new cathode material for sodium-ion batteries: Insights of the synergetic effects of multi-metal substitution and electrolyte optimization

[1]  Dong Zhou,et al.  A high-capacity P2 Na2/3Ni1/3Mn2/3O2 cathode material for sodium ion batteries with oxygen activity , 2018, Journal of Power Sources.

[2]  M. Winter,et al.  Performance and cost of materials for lithium-based rechargeable automotive batteries , 2018 .

[3]  Jun Lu,et al.  Dissolution, migration, and deposition of transition metal ions in Li-ion batteries exemplified by Mn-based cathodes – a critical review , 2018 .

[4]  K. Kubota,et al.  P′2-Na2/3Mn0.9Me0.1O2 (Me = Mg, Ti, Co, Ni, Cu, and Zn): Correlation between Orthorhombic Distortion and Electrochemical Property , 2017 .

[5]  Xingguo Qi,et al.  Yolk-shell structured Sb@C anodes for high energy Na-ion batteries , 2017 .

[6]  Feng Wu,et al.  A novel border-rich Prussian blue synthetized by inhibitor control as cathode for sodium ion batteries , 2017 .

[7]  Ya‐Xia Yin,et al.  Excellent Comprehensive Performance of Na‐Based Layered Oxide Benefiting from the Synergetic Contributions of Multimetal Ions , 2017 .

[8]  Hongyu Guan,et al.  P2-type Na 2/3 Mn 1-x Al x O 2 cathode material for sodium-ion batteries: Al-doped enhanced electrochemical properties and studies on the electrode kinetics , 2017 .

[9]  Ya‐Xia Yin,et al.  Designing Air-Stable O3-Type Cathode Materials by Combined Structure Modulation for Na-Ion Batteries. , 2017, Journal of the American Chemical Society.

[10]  Doron Aurbach,et al.  Fluoroethylene Carbonate as an Important Component for the Formation of an Effective Solid Electrolyte Interphase on Anodes and Cathodes for Advanced Li-Ion Batteries , 2017 .

[11]  Hong Wang,et al.  Electrolyte design strategies and research progress for room-temperature sodium-ion batteries , 2017 .

[12]  Martin Winter,et al.  Lithium ion, lithium metal, and alternative rechargeable battery technologies: the odyssey for high energy density , 2017, Journal of Solid State Electrochemistry.

[13]  Lei Wang,et al.  Copper-substituted Na0.67Ni0.3−xCuxMn0.7O2 cathode materials for sodium-ion batteries with suppressed P2–O2 phase transition , 2017 .

[14]  Ya‐Xia Yin,et al.  Ti‐Substituted NaNi0.5Mn0.5‐xTixO2 Cathodes with Reversible O3−P3 Phase Transition for High‐Performance Sodium‐Ion Batteries , 2017, Advanced materials.

[15]  M. Winter,et al.  Investigation of nano-sized Cu(II)O as a high capacity conversion material for Li-metal cells and lithium-ion full cells , 2017 .

[16]  Y. Meng,et al.  Exploring Oxygen Activity in the High Energy P2-Type Na0.78Ni0.23Mn0.69O2 Cathode Material for Na-Ion Batteries. , 2017, Journal of the American Chemical Society.

[17]  Ibrahim Saana Amiinu,et al.  Na‐Mn‐O Nanocrystals as a High Capacity and Long Life Anode Material for Li‐Ion Batteries , 2017 .

[18]  M. Obrovac,et al.  Crystal Structures and Electrochemical Performance of Air-Stable Na2/3Ni1/3–xCuxMn2/3O2 in Sodium Cells , 2017 .

[19]  Ya‐Xia Yin,et al.  Novel P2-type Na2/3Ni1/6Mg1/6Ti2/3O2 as an anode material for sodium-ion batteries. , 2017, Chemical communications.

[20]  E. Han,et al.  P2-type Na0.67Ni0.33−xCuxMn0.67O2 as new high-voltage cathode materials for sodium-ion batteries , 2017, Ionics.

[21]  K. Edström,et al.  The Effect of the Fluoroethylene Carbonate Additive in LiNi0.5Mn1.5O4 - Li4Ti5O12 Lithium-Ion Cells , 2017 .

[22]  S. Martinet,et al.  Identification and Quantification of the Main Electrolyte Decomposition By-product in Na-Ion Batteries through FEC: Towards an Improvement of Safety and Lifetime , 2017 .

[23]  M. Winter,et al.  Influence of electrolyte additives on the cathode electrolyte interphase (CEI) formation on LiNi1/3Mn1/3Co1/3O2 in half cells with Li metal counter electrode , 2016 .

[24]  P. Bruce,et al.  Structurally stable Mg-doped P2-Na2/3Mn1−yMgyO2 sodium-ion battery cathodes with high rate performance: insights from electrochemical, NMR and diffraction studies , 2016 .

[25]  M. Winter,et al.  Best Practice: Performance and Cost Evaluation of Lithium Ion Battery Active Materials with Special Emphasis on Energy Efficiency , 2016 .

[26]  K. Kubota,et al.  Sodium and Manganese Stoichiometry of P2-Type Na2/3 MnO2. , 2016, Angewandte Chemie.

[27]  Jun Wang,et al.  Durable high-rate capability Na0.44MnO2 cathode material for sodium-ion batteries , 2016 .

[28]  N. Chen,et al.  P2-Type Na0.67Ni0.23Mg0.1Mn0.67O2 as a High-Performance Cathode for a Sodium-Ion Battery. , 2016, Inorganic chemistry.

[29]  Xing-long Wu,et al.  P2-Na2/3Ni1/3Mn5/9Al1/9O2 Microparticles as Superior Cathode Material for Sodium-Ion Batteries: Enhanced Properties and Mechanisam via Graphene Connection. , 2016, ACS applied materials & interfaces.

[30]  M. Winter,et al.  Counterintuitive Role of Magnesium Salts as Effective Electrolyte Additives for High Voltage Lithium‐Ion Batteries , 2016 .

[31]  Haoshen Zhou,et al.  Understanding sodium-ion diffusion in layered P2 and P3 oxides via experiments and first-principles calculations: a bridge between crystal structure and electrochemical performance , 2016 .

[32]  Ya‐Xia Yin,et al.  Suppressing the P2-O2 Phase Transition of Na0.67 Mn0.67 Ni0.33 O2 by Magnesium Substitution for Improved Sodium-Ion Batteries. , 2016, Angewandte Chemie.

[33]  M. Winter,et al.  Structure determination of organic aging products in lithium-ion battery electrolytes with gas chromatography chemical ionization mass spectrometry (GC-CI-MS) , 2016 .

[34]  Jun Wang,et al.  O3-type Na[Fe1/3Ni1/3Ti1/3]O2 cathode material for rechargeable sodium ion batteries , 2016 .

[35]  H. Hahn,et al.  The truth about the 1st cycle Coulombic efficiency of LiNi1/3Co1/3Mn1/3O2 (NCM) cathodes. , 2016, Physical chemistry chemical physics : PCCP.

[36]  Neeraj Sharma,et al.  High-Performance P2-Phase Na2/3Mn0.8Fe0.1Ti0.1O2 Cathode Material for Ambient-Temperature Sodium-Ion Batteries , 2016 .

[37]  J. Tarascon,et al.  Na Reactivity toward Carbonate-Based Electrolytes: The Effect of FEC as Additive , 2016 .

[38]  M. Winter,et al.  New insights into the structure-property relationship of high-voltage electrolyte components for lithium-ion batteries using the pKa value , 2015 .

[39]  Chun‐Sing Lee,et al.  Copper substituted P2-type Na0.67CuxMn1−xO2: a stable high-power sodium-ion battery cathode , 2015 .

[40]  K. Hemalatha,et al.  Improved electrochemical performance of Na0.67MnO2 through Ni and Mg substitution , 2015 .

[41]  P. Bruce,et al.  Rate Dependent Performance Related to Crystal Structure Evolution of Na0.67Mn0.8Mg0.2O2 in a Sodium-Ion Battery , 2015 .

[42]  O. Dolotko,et al.  SPODI: High resolution powder diffractometer , 2015 .

[43]  Yang Li,et al.  Fluoroethylene Carbonate as Electrolyte Additive for Improving the electrochemical performances of High-Capacity Li1.16[Mn0.75Ni0.25]0.84O2 Material , 2015 .

[44]  M. Winter,et al.  Low-Cost Orthorhombic Nax[FeTi]O4 (x = 1 and 4/3) Compounds as Anode Materials for Sodium-Ion Batteries , 2015 .

[45]  S. Passerini,et al.  Mg-doping for improved long-term cyclability of layered Na-ion cathode materials - The example of P2-type Na x Mg 0.11 Mn 0.89 O 2 , 2015 .

[46]  M. J. McDonald,et al.  P2-type Na0.66Ni0.33–xZnxMn0.67O2 as new high-voltage cathode materials for sodium-ion batteries , 2015 .

[47]  P. Bruce,et al.  Review-Manganese-based P2-type transition metal oxides as sodium-ion battery cathode materials , 2015 .

[48]  Martin Winter,et al.  Review—Chemical Analysis for a Better Understanding of Aging and Degradation Mechanisms of Non-Aqueous Electrolytes for Lithium Ion Batteries: Method Development, Application and Lessons Learned , 2015 .

[49]  D. Nordlund,et al.  Beyond Divalent Copper: A Redox Couple for Sodium Ion Battery Cathode Materials , 2015 .

[50]  Teófilo Rojo,et al.  A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries , 2015 .

[51]  M. Winter,et al.  Separation and Quantification of Organic Electrolyte Components in Lithium-Ion Batteries via a Developed HPLC Method , 2015 .

[52]  M. Winter,et al.  Fluoroethylene Carbonate as Electrolyte Additive in Tetraethylene Glycol Dimethyl Ether Based Electrolytes for Application in Lithium Ion and Lithium Metal Batteries , 2015 .

[53]  M. Winter,et al.  Investigations on novel electrolytes, solvents and SEI additives for use in lithium-ion batteries: Systematic electrochemical characterization and detailed analysis by spectroscopic methods , 2014 .

[54]  Shinichi Komaba,et al.  Research development on sodium-ion batteries. , 2014, Chemical reviews.

[55]  Yi Cui,et al.  Manganese hexacyanomanganate open framework as a high-capacity positive electrode material for sodium-ion batteries , 2014, Nature Communications.

[56]  B. Scrosati,et al.  High Performance Na0.5[Ni0.23Fe0.13Mn0.63]O2 Cathode for Sodium‐Ion Batteries , 2014 .

[57]  Yong‐Sheng Hu,et al.  Novel copper redox-based cathode materials for room-temperature sodium-ion batteries , 2014 .

[58]  M. Armand,et al.  Na0.67Mn1−xMgxO2 (0 ≤ x ≤ 0.2): a high capacity cathode for sodium-ion batteries , 2014 .

[59]  H. Ahn,et al.  Single crystalline Na(0.7)MnO2 nanoplates as cathode materials for sodium-ion batteries with enhanced performance. , 2013, Chemistry.

[60]  Liquan Chen,et al.  Room-temperature stationary sodium-ion batteries for large-scale electric energy storage , 2013 .

[61]  Y. Meng,et al.  An advanced cathode for Na-ion batteries with high rate and excellent structural stability. , 2013, Physical chemistry chemical physics : PCCP.

[62]  Jens Leker,et al.  Current research trends and prospects among the various materials and designs used in lithium-based batteries , 2013, Journal of Applied Electrochemistry.

[63]  M. Winter,et al.  Enhanced thermal stability of a lithiated nano-silicon electrode by fluoroethylene carbonate and vinylene carbonate , 2013 .

[64]  M. Winter,et al.  Fluoroethylene Carbonate as an Additive for γ-Butyrolactone Based Electrolytes , 2013 .

[65]  Martin Winter,et al.  How Do Reactions at the Anode/Electrolyte Interface Determine the Cathode Performance in Lithium-Ion Batteries? , 2013 .

[66]  Shinichi Komaba,et al.  P2-type Na(x)[Fe(1/2)Mn(1/2)]O2 made from earth-abundant elements for rechargeable Na batteries. , 2012, Nature materials.

[67]  Yunhui Huang,et al.  Nitrogen‐Doped Porous Carbon Nanofiber Webs as Anodes for Lithium Ion Batteries with a Superhigh Capacity and Rate Capability , 2012, Advanced materials.

[68]  M. Hoelzel,et al.  High-resolution neutron powder diffractometer SPODI at research reactor FRM II , 2012 .

[69]  G. Ceder,et al.  Electrochemical Properties of Monoclinic NaNiO2 , 2011 .

[70]  Martin Winter,et al.  The Solid Electrolyte Interphase – The Most Important and the Least Understood Solid Electrolyte in Rechargeable Li Batteries , 2009 .

[71]  Kang Xu,et al.  Nonaqueous liquid electrolytes for lithium-based rechargeable batteries. , 2004, Chemical reviews.

[72]  Luis Sánchez,et al.  Synthesis and characterization of high-temperature hexagonal P2-Na0.6 MnO2 and its electrochemical behaviour as cathode in sodium cells , 2002 .

[73]  A. Mendiboure,et al.  Electrochemical intercalation and deintercalation of NaxMnO2 bronzes , 1985 .

[74]  P. Hagenmuller,et al.  Structural classification and properties of the layered oxides , 1980 .