Optimal resonance configuration for ultrasonic wireless power transmission to millimeter-sized biomedical implants

In order to achieve efficient wireless power transmission (WPT) to biomedical implants with millimeter (mm) dimensions, ultrasonic WPT links have recently been proposed. Operating both transmitter (Tx) and receiver (Rx) ultrasonic transducers at their resonance frequency (fr) is key in improving power transmission efficiency (PTE). In this paper, different resonance configurations for Tx and Rx transducers, including series and parallel resonance, have been studied to help the designers of ultrasonic WPT links to choose the optimal resonance configuration for Tx and Rx that maximizes PTE. The geometries for disk-shaped transducers of four different sets of links, operating at series-series, series-parallel, parallel-series, and parallel-parallel resonance configurations in Tx and Rx, have been found through finite-element method (FEM) simulation tools for operation at fr of 1.4 MHz. Our simulation results suggest that operating the Tx transducer with parallel resonance increases PTE, while the resonance configuration of the mm-sized Rx transducer highly depends on the load resistance, Rl. For applications that involve large Rl in the order of tens of kΩ, a parallel resonance for a mm-sized Rx leads to higher PTE, while series resonance is preferred for Rl in the order of several kΩ and below.

[1]  Eric M. Yeatman,et al.  Ultrasonic vs. Inductive Power Delivery for Miniature Biomedical Implants , 2010, 2010 International Conference on Body Sensor Networks.

[2]  Elad Alon,et al.  Model validation of untethered, ultrasonic neural dust motes for cortical recording , 2015, Journal of Neuroscience Methods.

[3]  Jan M. Rabaey,et al.  A Fully-Integrated, Miniaturized (0.125 mm²) 10.5 µW Wireless Neural Sensor , 2013, IEEE Journal of Solid-State Circuits.

[4]  S. Ozeri,et al.  Ultrasonic transcutaneous energy transfer for powering implanted devices. , 2010, Ultrasonics.

[5]  Sidney K. Edelman,et al.  Understanding Ultrasound Physics , 2012 .

[6]  Amin Arbabian,et al.  A mm-Sized Implantable Medical Device (IMD) With Ultrasonic Power Transfer and a Hybrid Bi-Directional Data Link , 2015, IEEE Journal of Solid-State Circuits.

[7]  Mehdi Kiani,et al.  Design considerations for ultrasonic power transmission to millimeter-sized implantable microelectronics devices , 2015, 2015 IEEE Biomedical Circuits and Systems Conference (BioCAS).

[8]  L. Carin,et al.  Relationship between intracortical electrode design and chronic recording function. , 2013, Biomaterials.

[9]  K. L. Montgomery,et al.  Wirelessly powered, fully internal optogenetics for brain, spinal and peripheral circuits in mice , 2015, Nature Methods.

[10]  Maysam Ghovanloo,et al.  Design and Optimization of Printed Spiral Coils for Efficient Transcutaneous Inductive Power Transmission , 2007, IEEE Transactions on Biomedical Circuits and Systems.

[11]  Tzu-Chieh Chou,et al.  A miniaturized ultrasonic power delivery system , 2014, 2014 IEEE Biomedical Circuits and Systems Conference (BioCAS) Proceedings.

[12]  Ming Yin,et al.  A 100-Channel Hermetically Sealed Implantable Device for Chronic Wireless Neurosensing Applications , 2013, IEEE Transactions on Biomedical Circuits and Systems.

[13]  Elad Alon,et al.  Neural Dust: An Ultrasonic, Low Power Solution for Chronic Brain-Machine Interfaces , 2013, 1307.2196.

[14]  Mehdi Kiani,et al.  A Figure-of-Merit for Design and Optimization of Inductive Power Transmission Links for Millimeter-Sized Biomedical Implants , 2016, IEEE Transactions on Biomedical Circuits and Systems.

[15]  Albert Kim,et al.  Omnidirectional Ultrasonic Powering for Millimeter-Scale Implantable Devices , 2015, IEEE Transactions on Biomedical Engineering.