The influence of oxygen concentration on the combustion of a fuel/oxidizer mixture

[1]  S. Turns.  Introduction to Combustion , 1995, Aerothermodynamics and Jet Propulsion.

[2]  H. Biteau,et al.  Ability of the Fire Propagation Apparatus to characterise the heat release rate of energetic materials. , 2009, Journal of hazardous materials.

[3]  G. Marlair,et al.  Toxicity issues pertaining to burning pyrotechnics , 2006 .

[4]  G. Marlair,et al.  Energetic materials and the fire problem , 2005 .

[5]  A. Tewarson.  Generation of Heat and Chemical Compounds in Fires , 2002 .

[6]  G. A. Melhem,et al.  The oxygen balance criterion for thermal hazards assessment , 1995 .

[7]  W. Pitts.  Application of thermodynamic and detailed chemical kinetic modeling to understanding combustion product generation in enclosure fires , 1994 .

[8]  V. Babrauskas.  Heat Release In Fires , 1990 .

[9]  C. Beyler.  Ignition and Burning of a Layer of Incomplete Combustion Products , 1984 .

[10]  W. Parker,et al.  Calculations of the Heat Release Rate by Oxygen Consumption for Various Applications , 1982 .

[11]  D. J. Rasbash,et al.  The extinction of diffusion flames burning in various oxygen concentrations by inert gases and bromotrifluoromethane , 1981 .

[12]  J. L. Lee,et al.  The influence of oxygen concentration on fuel parameters for fire modeling , 1981 .

[13]  Clayton Huggett,et al.  Estimation of rate of heat release by means of oxygen consumption measurements , 1980 .

[14]  E. S. Freeman.  The Kinetics of the Thermal Decomposition of Potassium Nitrate and of the Reaction between Potassium Nitrite and Oxygen1a , 1956 .

[15]  A. G. White,et al.  XCVI.—Limits for the propagation of flame in inflammable gas–air mixtures. Part III. The effects of temperature on the limits , 1925 .