Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects

The growing interest in scaffold-guided tissue engineering (TE) to guide and support cell proliferation in the repair and replacement of craniofacial and joint defects gave rise to the quest for a precise technique to create such scaffolds. Conventional manual-based fabrication techniques have several limitations such as the lack of reproducibility and precision. Rapid prototyping (RP) has been identified as a promising technique capable of building complex objects with pre-defined macro- and microstructures. The research focussed on the viability of using the selective laser sintering (SLS) RP technique for creating TE scaffolds. A biocomposite blend comprising of polyvinyl alcohol (PVA) and hydroxyapatite (HA) was used in SLS to study the feasibility of the blend to develop scaffolds. The biocomposite blends obtained via spray-drying technique and physical blending were subjected to laser-sintering to produce test specimens. The SLS-fabricated test specimens were characterized using scanning electron microscopy and X-ray diffraction. The test specimens were also tested for bioactivity by immersing the samples in simulated body fluid environment. The results obtained ascertained that SLS-fabricated scaffolds have good potential for TE applications.

[1]  J. Bardach,et al.  Repair of craniofacial defects with hydroxyapatite cement. , 1997, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[2]  L. Griffith,et al.  Tissue Engineering--Current Challenges and Expanding Opportunities , 2002, Science.

[3]  C K Chua,et al.  Fabrication of porous polymeric matrix drug delivery devices using the selective laser sintering technique , 2001, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[4]  K. Leong,et al.  Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. , 2003, Biomaterials.

[5]  S. E. Feinberg,et al.  Hydroxyapatite implants with designed internal architecture , 2001, Journal of materials science. Materials in medicine.

[6]  E. Chiellini,et al.  Biodegradation of poly(vinyl alcohol) in selected mixed microbial culture and relevant culture filtrate , 2002 .

[7]  S. Antrobus,et al.  Assessment of the effects on growth of porous hydroxyapatite granule cranioplasty in the immature guinea pig craniofacial skeleton. , 2003, Plastic and reconstructive surgery.

[8]  Y. Kameshima,et al.  Comparitive study of the formation of hydroxyapatite in simulated body fluid under static and flowing systems. , 2002, Journal of biomedical materials research.

[9]  R Langer,et al.  Functional arteries grown in vitro. , 1999, Science.

[10]  David J Mooney,et al.  Salt fusion: an approach to improve pore interconnectivity within tissue engineering scaffolds. , 2002, Tissue engineering.

[11]  B. Eppley.  Hydroxyapatite Cranioplasty: I. Experimental Results From a New Quick-Setting Material , 2003, The Journal of craniofacial surgery.

[12]  Woo Seob Kim,et al.  Cartilage Engineered in Predetermined Shapes Employing Cell Transplantation on Synthetic Biodegradable Polymers , 1994, Plastic and reconstructive surgery.

[13]  B. Derby,et al.  Manufacture of biomaterials by a novel printing process , 2002, Journal of materials science. Materials in medicine.

[14]  J. Vacanti,et al.  Toward development of an implantable tissue engineered liver. , 1996, Biomaterials.

[15]  K. Liao,et al.  Tensile properties, tension-tension fatigue and biological response of polyetheretherketone-hydroxyapatite composites for load-bearing orthopedic implants. , 2003, Biomaterials.

[16]  K. Khor,et al.  An in vitro investigation of plasma sprayed hydroxyapatite (HA) coatings produced with flame-spheroidized feedstock. , 2002, Biomaterials.

[17]  P H Krebsbach,et al.  Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds. , 2003, Biomaterials.

[18]  Jennifer L West,et al.  Photocrosslinkable polyvinyl alcohol hydrogels that can be modified with cell adhesion peptides for use in tissue engineering. , 2002, Biomaterials.

[19]  D E Ingber,et al.  Preparation of poly(glycolic acid) bonded fiber structures for cell attachment and transplantation. , 1993, Journal of biomedical materials research.

[20]  Amit Bandyopadhyay,et al.  Processing and characterization of porous alumina scaffolds , 2002, Journal of materials science. Materials in medicine.

[21]  K. Leong,et al.  Scaffold development using selective laser sintering of polyetheretherketone-hydroxyapatite biocomposite blends. , 2003, Biomaterials.

[22]  Han Tong Loh,et al.  Fabrication of 3D chitosan–hydroxyapatite scaffolds using a robotic dispensing system , 2002 .

[23]  Joel W. Barlow,et al.  Materials for biomedical applications , 1999 .