Rolling ball method for 5-axis surface machining

[1]  D. Ross.  Computer-aided design , 1961, CACM.

[2]  G. W. Vickers,et al.  The definition and manufacture of compound curvature surfaces using G-surf , 1985 .

[3]  Gerald Farin,et al.  Curves and surfaces for computer aided geometric design , 1990 .

[4]  Takafumi Saito,et al.  NC machining with G-buffer method , 1991, SIGGRAPH.

[5]  Robert B. Jerard,et al.  5-axis Machining of Sculptured Surfaces with a Flat-end Cutter , 1994, Comput. Aided Des..

[6]  Jean-Pierre Kruth,et al.  Optimization and dynamic adaptation of the cutter inclination during five-axis milling of sculptured surfaces , 1994 .

[7]  Sanjeev Bedi,et al.  Five-axis milling of spherical surfaces , 1996 .

[8]  Sanjeev Bedi,et al.  Implementation of the principal-axis method for machining of complex surfaces , 1996 .

[9]  Sanjeev Bedi,et al.  Tool path planning for five-axis machining using the principal axis method , 1997 .

[10]  Andrew Warkentin.  Multi-point machining of sculptured surfaces , 1997 .

[11]  Robert B. Jerard,et al.  Comparison of discretization algorithms for surfaces with application to numerically controlled machining , 1997, Comput. Aided Des..

[12]  Sanjeev Bedi,et al.  Intersection approach to multi-point machining of sculptured surfaces , 1998, Comput. Aided Geom. Des..

[13]  Sanjeev Bedi,et al.  Swept volumes of toroidal cutters using generating curves , 1998 .

[14]  Dharmaraj Veeramani,et al.  Issues in patch-by-patch machining of compound sculptured surfaces , 1998 .

[15]  Yuan-Shin Lee,et al.  Non-isoparametric tool path planning by machining strip evaluation for 5-axis sculptured surface machining , 1998, Comput. Aided Des..

[16]  Chih-Ching Lo,et al.  Efficient cutter-path planning for five-axis surface machining with a flat-end cutter , 1999, Comput. Aided Des..

[17]  Sanjeev Bedi,et al.  Multi-point tool positioning strategy for 5-axis mashining of sculptured surfaces , 2000, Comput. Aided Geom. Des..

[18]  Walter Rubio,et al.  Optimising Tool Positioning for End-Mill Machining of Free-Form Surfaces on 5-Axis Machines for both Semi-Finishing and Finishing , 2000 .

[19]  Sanjay E. Sarma,et al.  Generating 5-axis NC roughing paths directly from a tessellated representation , 2000, Comput. Aided Des..

[20]  Sanjeev Bedi,et al.  PII: S0890-6955(99)00058-9 , 1999 .

[21]  Paul J. Gray,et al.  Comparison of 5-Axis and 3-Axis Finish Machining of Hydroforming Die Inserts , 2001 .

[22]  Sanjeev Bedi,et al.  Surface swept by a toroidal cutter during 5-axis machining , 2001, Comput. Aided Des..

[23]  Dong-Soo Kim,et al.  A new curve-based approach to polyhedral machining , 2002, Comput. Aided Des..

[24]  Chuang-Jang Chiou,et al.  A machining potential field approach to tool path generation for multi-axis sculptured surface machining , 2002, Comput. Aided Des..

[25]  Bert Lauwers,et al.  Optimal and collision free tool posture in five-axis machining through the tight integration of tool path generation and machine simulation , 2003, Comput. Aided Des..

[26]  Paul J. Gray,et al.  Cusp modeling for 5-axis surface machining , 2003, SM '03.

[27]  Paul J. Gray,et al.  Graphics-assisted Rolling Ball Method for 5-axis surface machining , 2004, Comput. Aided Des..