Relaxation patterns in powder injection mouldings made with repeated flow Reversals

[1]  John Evans,et al.  On the heat balance during double-gated, modulated-pressure injection moulding , 1998 .

[2]  John Evans,et al.  Analysis of open-ended injection moulding , 1997 .

[3]  Tao Zhang,et al.  Control of fibre orientation in injection moulded ceramic composites , 1997 .

[4]  John Evans,et al.  Control of orientation in short fibre-reinforced metal matrix composites , 1996 .

[5]  L. Wang,et al.  Management of morphology and physical properties in moulded thermotropic liquid crystalline polymers , 1996 .

[6]  Hideo Takahashi,et al.  Characterization of Particle Packing in an Injected Molded Green Body , 1995 .

[7]  John Evans,et al.  Ceramic injection moulding: Some effects of powder volume fraction , 1994 .

[8]  Michael J. Hoffmann,et al.  Anisotropic sintering shrinkage in injection-moulded composite ceramics , 1993 .

[9]  John Evans,et al.  Relaxation effects in large injection moulded ceramic bodies , 1993 .

[10]  Julian R. G. Evans,et al.  Measurement of Residual Stres in Injection‐Molded Ceramics , 1992 .

[11]  M. Bevis,et al.  Application of shear controlled orientation technology to powder injection moulding , 1992 .

[12]  N. J. Mills,et al.  Computer modelling of the origin of defects in ceramic injection moulding , 1991 .

[13]  John Evans,et al.  Computer modelling of the origin of defects in ceramic injection moulding , 1991 .

[14]  T. Zhang,et al.  Anomalies in the thermal expansion of ceramic, injection moulded bodies , 1990 .

[15]  M. Bevis,et al.  Development and application of multiple live-feed moulding for the management of fibres in moulded parts , 1990 .

[16]  J. R. White,et al.  Residual stresses and molecular orientation in particulate-filled polypropylene , 1988 .

[17]  D. Norris,et al.  Whisker Orientation Measurements in Injection Molded Si3N4-SiC Composites , 1988 .

[18]  M. Bevis,et al.  Multiple live-feed injection moulding , 1987 .

[19]  M. Folkes.  Short Fibre Reinforced Thermoplastics , 1982 .

[20]  J. Kubát,et al.  Polymer-glass separation in the spiral mold test , 1974 .