Modeling progressive damage accumulation in thin walled composite beams for rotor blade applications

In the present study, models of the key damage modes in composite materials such as matrix cracking, debonding/delamination and fiber breakage are included in a thin walled composite beam analysis for helicopter rotor blade applications. The effects of transverse shear, elastic couplings and restrained warping are also included while modeling the thin walled composite beams. Matrix cracking is modeled at the laminate level and debonding/delamination and �?ber breakage at the lamina level and included in the formulation by adjusting the A, B and D matrices for composite laminates. The beam analysis is used to investigate the effect of damage on the various properties of thin walled composite beams such as out-of-plane stiffness, in-plane stiffness and torsion stiffness and deflections such as bending slopes and twist under an applied load. A two-cell airfoil section with $[0/\pm45/90]_s$ family of laminates having stiffness properties equivalent to a stiff in-plane hingeless rotor blade is considered. It is found that the bending and torsion stiffness loss due to matrix cracking is about 6–12% and 25–30%, respectively, and due to debonding/delamination is further 6–8% and 40–45%, respectively. Most of the bending stiffness loss is observed in the fiber breakage damage mode. It is also observed that the combination of the static tip bending and torsion response can be used to predict length of the damaged part of the thin walled composite beams, damage location and damage level.

[1]  T. K. O'Brien,et al.  Residual thermal and moisture influences on the strain energy release rate analysis of local delaminations from matrix cracks , 1991 .

[2]  Constantinos Soutis,et al.  Stiffness degradation in cross-ply laminates damaged by transverse cracking and splitting , 2000 .

[3]  David H. Allen,et al.  A thermomechanical constitutive theory for elastic composites with distributed damage—I. Theoretical development , 1987 .

[4]  Z. Hashin.  Analysis of Orthogonally Cracked Laminates Under Tension , 1987 .

[5]  Peter Gudmundson,et al.  Thermoelastic properties in combined bending and extension of thin composite laminates with transverse matrix cracks , 1997 .

[6]  Peter Gudmundson,et al.  An analytic model for thermoelastic properties of composite laminates containing transverse matrix cracks , 1993 .

[7]  David H. Allen,et al.  A thermomechanical constitutive theory for elastic composites with distributed damage. II: Application to matrix cracking in laminated composites , 1987 .

[8]  A. G. Gibson,et al.  The Effect of Matrix Microcracks on the Stress-Strain Relationship in Fiber Composite Tubes , 2003 .

[9]  Inderjit Chopra,et al.  Structural response of composite beams and blades with elastic couplings , 1992 .

[10]  J. E. Bailey,et al.  Multiple transverse fracture in 90° cross-ply laminates of a glass fibre-reinforced polyester , 1977 .

[11]  Inderjit Chopra,et al.  Structural behavior of two-cell composite rotor blades with elastic couplings , 1991 .

[12]  Edward C. Smith,et al.  Active Interrogation Of Helicopter Rotor Faults Using Trailing Edge Flap Actuation , 2001 .

[13]  John A. Nairn,et al.  The initiation and growth of delaminations induced by matrix microcracks in laminated composites , 1992 .

[14]  Carlos E. S. Cesnik,et al.  Assessment of Beam Modeling Methods for Rotor Blade Applications , 2001 .

[15]  Costas Soutis,et al.  Strain energy release rate associated with local delamination in cracked composite laminates , 1994 .

[16]  H Azzam,et al.  The use of Math-Dynamic Models to Aid the Development of Integrated Health and Usage Monitoring Systems , 1992 .

[17]  D.L. Flaggs,et al.  Prediction of Tensile Matrix Failure in Composite Laminates , 1985 .

[18]  P. Gudmundson,et al.  Prediction of thermoelastic properties of composite laminates with matrix cracks , 1992 .

[19]  David H. Allen,et al.  Matrix cracking in laminated composites under monotonic and cyclic loadings , 1991 .

[20]  Peter Gudmundson,et al.  Matrix crack induced stiffness reductions in [(0(m)/90(n)/+theta(p)/-theta(q))(s)](m) composite laminates , 1995 .

[21]  Erian A. Armanios,et al.  Fracture analysis of transverse crack-tip and free-edge delamination in laminated composites , 1991 .

[22]  R. J. Nuismer,et al.  A Theory for Progressive Matrix Cracking in Composite Laminates , 1989 .

[23]  George J. Dvorak,et al.  Analysis of Progressive Matrix Cracking in Composite Laminates I. Thermoelastic Properties of a Ply with Cracks , 1985 .

[24]  Kenneth Reifsnider,et al.  Fatigue of composite materials , 1991 .

[25]  Ramesh Talreja,et al.  Stiffness properties of composite laminates with matrix cracking and interior delamination , 1986 .

[26]  Darryll J. Pines,et al.  Damage Identification of Chordwise Crack Size and Location in Uncoupled Composite Rotorcraft Flexbeams , 1998 .

[27]  K. P. Herrmann,et al.  Delaminations induced by constrained transverse cracking in symmetric composite laminates , 1999 .

[28]  Ranjan Ganguli,et al.  On the effect of matrix cracks in composite helicopter rotor blade , 2005 .

[29]  Maria Kashtalyan,et al.  Analysis of local delaminations in composite laminates with angle-ply matrix cracks , 2002 .

[30]  Ramesh Talreja,et al.  Modeling of Damage Development in Composites Using Internal Variables Concepts , 1987 .

[31]  H. Tang,et al.  Micromechanics characterization of sublaminate damage , 1990 .

[32]  Satish A. Salpekar,et al.  Combined effect of matrix cracking and stress-free edge on delamination , 1991 .

[33]  J.-F. Le Corre,et al.  A model for transverse cracking and delamination in cross-ply laminates , 2000 .

[34]  Edward C. Smith,et al.  Vibration and flutter of stiff-inplane elastically tailored composite rotor blades , 1993 .

[35]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[36]  Inderjit Chopra,et al.  Simulation of Helicopter Rotor-System Structural Damage, Blade Mistracking, Friction, and Freeplay , 1998 .

[37]  Fu-Kuo Chang,et al.  An Accumulative Damage Model for Tensile and Shear Failures of Laminated Composite Plates , 1995 .