Fabrication and Tribological Evaluation of Vacuum Plasma-Sprayed B4C Coating
暂无分享,去创建一个
Liping Huang | Chucheng Lin | H. Ji | Xuebin Zheng | Y. Niu | Huiying Zhu
[1] D. Xiong,et al. Effect of load and sliding speed on friction and wear behavior of silver/h-BN containing Ni-base P/M composites , 2011 .
[2] 尹志坚,et al. Sliding wear characteristics of plasma-sprayed Al2O3 and Cr2O3 coatings against copper alloy under severe conditions , 2010 .
[3] C. Ding,et al. Sliding wear characteristics of plasma-sprayed Al2O3 and Cr2O3 coatings against copper alloy under severe conditions , 2010 .
[4] M. Ahsan,et al. Corrosion studies on the plasma-sprayed nanostructured titanium dioxide coating , 2009 .
[5] Changxia Liu,et al. Effect of Al and TiO2 on sinterability and mechanical properties of boron carbide , 2009 .
[6] J. Mostaghimi,et al. Microstructure of vacuum plasma-sprayed boron carbide , 2005 .
[7] O. Sarikaya. Effect of some parameters on microstructure and hardness of alumina coatings prepared by the air plasma spraying process , 2005 .
[8] R. Neu,et al. Evaluation of vacuum plasma-sprayed boron carbide protection for the stainless steel first wall of WENDELSTEIN 7-X , 2004 .
[9] Raymond Bayer,et al. Mechanical wear fundamentals and testing , 2004 .
[10] H. Yokoi,et al. Structure and mechanical properties of boron carbide coatings formed by electromagnetically accelerated plasma spraying , 2003 .
[11] R. Speyer,et al. Pressureless Sintering of Boron Carbide , 2003 .
[12] Hailei Zhao,et al. Densification and mechanical properties of mullite/TiO2-coated B4C composites , 2003 .
[13] S. Kanzaki,et al. High strength B4C–TiB2 composites fabricated by reaction hot-pressing , 2003 .
[14] D. Stöver,et al. New environmental barrier coating system on carbon-fiber reinforced silicon carbide composites , 2003, Thermal Spray 2003: Proceedings from the International Thermal Spray Conference.
[15] S. Lee,et al. Study on plasma sprayed boron carbide coating , 2002 .
[16] A. Ruff,et al. Friction and wear properties of WC-Co and Mo-Mo2C based functionally graded materials , 2001 .
[17] S. Lee,et al. Young's modulus and residual stress of plasma-sprayed boron carbide coatings , 2001 .
[18] A. G. Evans,et al. Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings , 2000 .
[19] P. H. Shipway,et al. Microstructural evolution in thermally sprayed WC-Co coatings: Comparison between nanocomposite and conventional starting powders , 2000 .
[20] J. Linke,et al. Heat flux experiments on first wall mock-ups coated by plasma sprayed B4C , 1996 .
[21] K. Nishiyama. Sintering and Tribology of Boride Hard Materials , 1996 .
[22] J. Greim,et al. Wear of boron carbide ceramics by abrasive waterjets , 1995 .
[23] Kazunori Umeda,et al. Friction and wear of boride ceramics in air and water , 1993 .
[24] H. Herman,et al. Microstructural investigation of plasma-sprayed aluminum coatings☆ , 1977 .