Progress in the 10-MW 140-GHz ECH System for the Stellarator W7-X

During the last years, electron cyclotron heating (ECH) was proven to be one of the most attractive heating schemes for stellarators because it provides net-current-free plasma startup and heating. Both the stellarator Wendelstein 7-X (W7-X), which is under construction at the Max-Planck-Institut fu umlr Plasmaphysik, Greifswald, Germany, and the International Thermonuclear Experimental Reactor (ITER) tokamak, which will be built in Cadarache, France, will be equipped with a strong ECH and current-drive system. Both systems are comparable in frequency and have continuous-wave capability (140 GHz, 10 MW for W7-X and 170 GHz, 24 MW for ITER). The commissioning of the ECH plant for W7-X is well underway; the status of the project and the first integrated full-power test results from two modules are reported and may provide valuable input for the ITER plant. The ten gyrotrons at W7-X will be arranged in two subgroups symmetrically to a central beam duct in the ECH hall. The RF wave of each subgroup will be combined and transmitted by a purely optical multibeam-waveguide (MBWG) transmission line from the gyrotrons to the torus. The combination of five 1 MW gyrotron beams to one beam line with a power of 5 MW reduces the complexity of the system considerably. The single- and MBWG mirrors and the polarizers have been manufactured. Cold tests of a full-size uncooled prototype line delivered an efficiency exceeding 90%. The microwave power will be launched to the plasma through ten chemical-vapor-deposited-diamond barrier windows and in-vessel quasi-optical plug-in launchers, allowing each 1-MW RF beam to be steered independently. The polarization, as well as the poloidal and toroidal launch angles, will be adjusted individually to provide optimum conditions for different heating and current-drive scenarios.

[1]  G. Gantenbein,et al.  The W7-X ECRH Plant: Recent Achievements , 2007 .

[2]  Stefan Illy,et al.  Transverse field collector sweep system for high power CW gyrotrons , 2007 .

[3]  G. Gantenbein,et al.  Electron Cyclotron Heating for W7-X: Physics and Technology , 2007 .

[4]  M. Schmid,et al.  EU Megawatt-Class 140-GHz CW Gyrotron , 2006, IEEE Transactions on Plasma Science.

[5]  H. R. Jory,et al.  CPI Gyrotrons For Fusion EC Heating , 2006 .

[6]  M. Schmid,et al.  High-power gyrotron development at Forschungszentrum Karlsruhe for fusion applications , 2005, IEEE Transactions on Plasma Science.

[7]  K. Felch,et al.  Recent advances in increasing output power and pulse duration in gyrotron oscillators , 2005, 2005 Joint 30th International Conference on Infrared and Millimeter Waves and 13th International Conference on Terahertz Electronics.

[8]  G. Dammertz,et al.  A high-efficiency quasi-optical mode converter for a 140-GHz 1-MW CW gyrotron , 2005, IEEE Transactions on Electron Devices.

[9]  Philipp Borchard,et al.  Recent ITER-Relevant Gyrotron Tests , 2005 .

[10]  M. Schmid,et al.  Development of multimegawatt gyrotrons for fusion plasma heating and current drive , 2005, Fifth IEEE International Vacuum Electronics Conference (IEEE Cat. No.04EX786).

[11]  W. Kasparek,et al.  A grating coupler for in-situ alignment of a Gaussian Beam-principle, design, and low-power test , 2004, IEEE Transactions on Antennas and Propagation.

[12]  M. Schmid,et al.  Mirror development for the 140 GHz ECRH system of the stellarator W7-X , 2003 .

[13]  M. Thumm,et al.  Power modulation capabilities of the 140 GHz/1 MW gyrotron for the stellarator Wendelstein 7-X , 2003 .

[14]  Andreas Meier,et al.  CVD diamond windows studied with low- and high-power millimeter waves , 2002 .

[15]  Manfred Thumm,et al.  Passive high-power microwave components , 2002 .

[16]  W. Kasparek,et al.  Measurements of Ohmic Losses of Metallic Reflectors at 140 GHz Using a 3-Mirror Resonator Technique , 2001 .

[17]  W. Kasparek,et al.  Analysis of a multiple-beam waveguide for free-space transmission of microwaves , 2001 .

[18]  G. Gantenbein,et al.  Development of a 140 GHz, 1 MW, Continuous Wave Gyrotron for the W7-X Stellarator , 2001 .

[19]  V. Erckmann,et al.  Electron cyclotron resonance heating and current drive in the W7-X stellarator , 1998 .

[20]  V. Erckmann,et al.  The W7-X project: scientific basis and technical realization , 1997, 17th IEEE/NPSS Symposium Fusion Engineering (Cat. No.97CH36131).

[21]  ECRH-Group,et al.  Resonant and Nonresonant Electron Cyclotron Heating at Densities above the Plasma Cutoff by O-X-B Mode Conversion at the W7-As Stellarator , 1997 .

[22]  G. Gantenbein,et al.  Calculations and Experiments on Multi-Beam Transmission for the 140 GHZ/10MW CW ECRH System on W7-X , 1997 .

[23]  G. Gantenbein,et al.  Conceptual Design of the 140 GHz/10 MW CW ECRH System for the Stellarator W7-X , 1996 .

[24]  G. Gantenbein,et al.  New developments and test of high power transmission components for ECRH on ASDEX-Upgrade and W7-AS , 1995 .

[25]  D. Vinogradov,et al.  Mirror conversion of gaussian beams with simple astigmatism , 1995 .

[26]  W. Kasparek,et al.  Microwave reflection properties of grooved metallic mirrors , 1992 .

[27]  J. Murphy,et al.  Distortion of a simple Gaussian beam on reflection from off-axis ellipsoidal mirrors , 1987 .

[28]  R. Winston.  Light Collection within the Framework of Geometrical Optics , 1970 .