Influences of nano-green lubricants in the friction-stir process of TiAlN coated alloys

[1]  S. Boopathi,et al.  Impact analysis of ceramic tile powder aggregates on self-compacting concrete , 2023, Engineering Research Express.

[2]  S. Boopathi,et al.  Experimental investigation on microhardness, surface roughness, and white layer thickness of dry EDM , 2023, Engineering Research Express.

[3]  Vigneswaran Dhasarathan,et al.  Experimental investigations on cryogenic friction-stir welding of similar ZE42 magnesium alloys , 2022, Alexandria Engineering Journal.

[4]  F. Ashrafizadeh,et al.  Anticorrosion performance of TiN coating with electroless nickel-phosphorus interlayer on Al 6061 alloy , 2022, Materials Chemistry and Physics.

[5]  S. Boopathi,et al.  An experimental study on the hardness and wear rate of carbonitride coated stainless steel , 2022, Materials Today: Proceedings.

[6]  S. Boopathi,et al.  INFLUENCES OF BORON CARBIDE PARTICLES ON THE WEAR RATE AND TENSILE STRENGTH OF AA2014 SURFACE COMPOSITE FABRICATED BY FRICTION-STIR PROCESSING , 2022, Materiali in tehnologije.

[7]  M. Pandian,et al.  Investigation on corrosion and tensile Characteristics: Friction stir welding of AA7075 and AA2014 , 2022, Materials Today: Proceedings.

[8]  S. Sudhagar,et al.  Influences of Mg-Cr filler materials in Friction Stir Process of Aluminium-based dissimilar alloys , 2022, Materials Today: Proceedings.

[9]  M. Jeyakumar,et al.  An experimental study on friction stir processing of aluminium alloy (AA-2024) and boron nitride (BNp) surface composite , 2022, Materials Today: Proceedings.

[10]  M. Jeyakumar,et al.  Influences of Friction stir tool parameters for joining two similar AZ61A alloy plates , 2021, Materials Today: Proceedings.

[11]  S. Boopathi,et al.  Friction stir processing of boron carbide reinforced aluminium surface (Al-B4C) composite: Mechanical characteristics analysis , 2021, Materials Today: Proceedings.

[12]  S. Boopathi,et al.  Optimization of friction stir welding process to join dissimilar AA2014 and AA7075 aluminum alloys , 2021, Materials Today: Proceedings.

[13]  S. Boopathi.  An extensive review on sustainable developments of dry and near-dry electrical discharge machining processes , 2021, Journal of Manufacturing Science and Engineering.

[14]  Ram Subbiah,et al.  Near-dry wire-cut electrical discharge machining process using water–air-mist dielectric fluid: An experimental study , 2021, Materials Today: Proceedings.

[15]  Sureshkumar Myilsamy,et al.  Experimental Investigation of a Cryogenically Cooled Oxygen-mist Near-dry Wire-cut Electrical Discharge Machining Process , 2021, Strojniški vestnik – Journal of Mechanical Engineering.

[16]  R. Mishra,et al.  Microstructure and mechanical characterization of tungsten inert gas-welded joint of AA6061 and AA7075 by friction stir processing , 2021, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications.

[17]  N. Arivazhagan,et al.  Innovation of thermoplastic polymers and metals hybrid structure using friction stir welding technique: challenges and future perspectives , 2021 .

[18]  C. Kübel,et al.  Role of carbon on the thermal and electrical properties of graphene- enriched silicon oxycarbides , 2020 .

[19]  Hira Singh.  A review paper on friction stir welding process , 2017 .

[20]  I. Dinaharan,et al.  Development of quartz particulate reinforced AA6063 aluminum matrix composites via friction stir processing , 2016 .

[21]  K. Sivakumar,et al.  Optimal parameter prediction of oxygen-mist near-dry wire-cut EDM , 2016, Int. J. Manuf. Technol. Manag..

[22]  Heena,et al.  Determination of glass transition temperature of reduced graphene oxide-poly(vinyl alcohol) composites using temperature dependent Fourier transform infrared spectroscopy , 2016 .

[23]  V. Raju,et al.  Effect of TiN particulate reinforcement on corrosive behaviour of aluminium 6061 composites in chloride medium , 2013, Bulletin of Materials Science.

[24]  S. Boopathi,et al.  Experimental investigation and parameter optimization of near-dry wire-cut electrical discharge machining using multi-objective evolutionary algorithm , 2013 .

[25]  Qiang Liu,et al.  Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing , 2013 .

[26]  S. Jung,et al.  Microstructure and mechanical property of A356 based composite by friction stir processing , 2013 .

[27]  A. Abdollah-zadeh,et al.  Microstructural and tribological properties of Al5083 based surface hybrid composite produced by friction stir processing , 2012 .

[28]  B. Sampath,et al.  Influences of Welding Parameters on Friction Stir Welding of Aluminum and Magnesium: A Review , 2021, Recent Advancements in Geotechnical Engineering.

[29]  A. Devaraju,et al.  Study on Mechanical Propreties of Friction Stir Welded Dissimilar AA 2024 and AA 7075 Aluminum Alloy Joints , 2017 .

[30]  I. Dinaharan,et al.  Production and wear characterization of AA6082 -TiC surface composites by friction stir processing , 2014 .