Reciprocal-space mapping for simultaneous determination of texture and stress in thin films

A method of reciprocal-space mapping followed by Rietveld-type refinement of the maps has been developed and tested for strongly textured thin films with fibre texture. The method is particularly useful for simultaneous analysis of stress and texture, especially in non-cubic materials. It could also be used for the analysis of other parameters, like film thickness, microstrain and domain size. Both of the extreme elastic models (Voigt/Reuss) have been adopted for the case of the fibre texture often present in thin films. The method allows estimation of residual stresses even for very strong [001] texture in hexagonal materials with angular half-widths of a few degrees. The procedure of two-dimensional reciprocal-space map fitting is described in detail; simulations are presented and discussed. The method can be applied to multiphase materials, as long as the assumptions of the elastic models (Voigt/Reuss) are valid in the multiphase film.

[1]  A. Leineweber,et al.  Diffraction Line Broadening due to Lattice-Parameter Variations caused by a Spatially Varying Scalar Variable: Its Orientation Dependence caused by Locally Varying Nitrogen Content in ε-FeN0.433. , 2004 .

[2]  P. Scardi,et al.  Whole powder pattern modelling. , 2002, Acta crystallographica. Section A, Foundations of crystallography.

[3]  J. Gubicza,et al.  MWP-fit: a program for multiple whole-profile fitting of diffraction peak profiles by ab initio theoretical functions , 2001 .

[4]  P. Scardi,et al.  Whole diffraction pattern-fitting of polycrystalline fcc materials based on microstructure , 2000 .

[5]  A. Borbely,et al.  The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice , 1999 .

[6]  Zhigang Suo,et al.  The effect of stress on the dielectric properties of barium strontium titanate thin films , 1999 .

[7]  N. Popa.  The (hkl) Dependence of Diffraction-Line Broadening Caused by Strain and Size for all Laue Groups in Rietveld Refinement , 1998 .

[8]  S. Martelli,et al.  Residual stress and adhesion in ion-assisted hafnia coatings on glass* , 1996 .

[9]  P. Klimanek,et al.  X-Ray and Neutron Diffraction in Nonideal Crystals , 1996 .

[10]  R. Kužel,et al.  Complex XRD microstructural studies of hard coatings applied to PVD-deposited TiN films Part II. Transition from porous to compact films and microstructural inhomogeneity of the layers , 1995 .

[11]  R. Černý,et al.  Empirical Texture Corrections for Asymmetric Diffraction and Inclined Textures , 1995 .

[12]  R. Kužel,et al.  Complex XRD microstructural studies of hard coatings applied to PVD-deposited TiN films Part I. Problems and methods , 1994 .

[13]  Ometron Ltd,et al.  Residual stress measurement , 1989 .

[14]  R. Kužel,et al.  X-ray diffraction line broadening due to dislocations in non-cubic crystalline materials. III. Experimental results for plastically deformed zirconium , 1989 .

[15]  C. Brakman,et al.  The influence of texture on the strain measured by diffraction , 1988 .

[16]  J. Lebrun,et al.  X-ray macrostress determination on textured material; use of the ODF for calculating the X-ray compliances , 1987, Metallurgical and Materials Transactions A.

[17]  C. Brakman.  Surface spherical harmonics and intensity and strain pole figures of cubic textured materials. Erratum , 1987 .

[18]  W. A. Dollase,et al.  Correction of intensities for preferred orientation in powder diffractometry: application of the March model , 1986 .

[19]  C. Brakman,et al.  Residual stresses in cubic materials with orthorhombic or monoclinic specimen symmetry: influence of texture on ψ splitting and non‐linear behaviour , 1983 .

[20]  Y. Sasa,et al.  Structure of stoichiometric USi2 , 1976 .