A novel combination of precursor pyrolysis assisted sintering and rapid sintering for construction of multi-composition coatings to improve ablation resistance of SiOC ceramic modified carbon fiber needled felt preform composites

[1]  Jiecai Han,et al.  Preparation and properties of SiOC ceramic modified carbon fiber needled felt preform composites , 2020 .

[2]  S. Dong,et al.  Ablation behavior of three-dimensional Cf/SiC-ZrC-ZrB2 composites prepared by a joint process of sol-gel and reactive melt infiltration , 2018 .

[3]  Lai-fei Cheng,et al.  Effect of B4C on the microstructure and properties of B4C modified three-dimensional needled C/C-SiC composites , 2017 .

[4]  Jiecai Han,et al.  High temperature structure evolution of macroporous SiOC ceramics prepared by a sol-gel method , 2015 .

[5]  Yi Zeng,et al.  In-situ fabrication of ZrB2–SiC/SiC gradient coating on C/C composites , 2015 .

[6]  Hejun Li,et al.  Oxidation protection and behavior of in-situ zirconium diboride–silicon carbide coating for carbon/carbon composites , 2015 .

[7]  Jiangbo Wen,et al.  Preparation and anti-oxidation properties of Si(O)C coated carbon-bonded carbon fibre composites , 2015 .

[8]  Jiecai Han,et al.  Preparation of a multi-composition coating for oxidation protection of modified carbon-bonded carbon fiber composites by a rapid sintering method , 2015 .

[9]  Qizhong Huang,et al.  Microstructure and ablation behavior of C/C–HfC composites prepared by precursor infiltration and pyrolysis , 2015 .

[10]  D. Fang,et al.  A lightweight, high compression strength ultra high temperature ceramic corrugated panel with potential for thermal protection system applications , 2015 .

[11]  D. Fang,et al.  Two-step hot pressing of bimodal micron/nano-ZrB2 ceramic with improved mechanical properties and thermal shock resistance , 2014 .

[12]  Hejun Li,et al.  ZrB2–SiC gradient oxidation protective coating for carbon/carbon composites , 2014 .

[13]  Hejun Li,et al.  Oxidation and Mechanical Properties of SiC/SiC–MoSi2–ZrB2 Coating for Carbon/Carbon Composites , 2014 .

[14]  Hejun Li,et al.  ZrB2–SiC coating to protect carbon/carbon composites against ablation , 2013 .

[15]  Hejun Li,et al.  Ablation Behavior of ZrB2-Based Coating Prepared by Supersonic Plasma Spraying for SiC-Coated C/C Composites Under Oxyacetylene Torch , 2013, Journal of Thermal Spray Technology.

[16]  H. Kleebe,et al.  Polymer-derived SiCN and SiOC ceramics – structure and energetics at the nanoscale , 2013 .

[17]  Hejun Li,et al.  A multilayer MoSi2–SiC–B coating to protect SiC-coated carbon/carbon composites against oxidation , 2012 .

[18]  L. A. Tkachenko,et al.  High-temperature protective coatings for carbon fibers , 2012, Inorganic Materials.

[19]  D. L. Myers,et al.  Active Oxidation of SiC , 2011 .

[20]  Xuebin Zheng,et al.  A comparative study of MoSi2 coatings manufactured by atmospheric and vacuum plasma spray processes , 2011 .

[21]  Hejun Li,et al.  Oxidation Protective C/SiC/Si-SiC Multilayer Coating for Carbon/Carbon Composites Applying at 1873 K , 2010 .

[22]  Xiaohong Shi,et al.  B2O3 modified SiC–MoSi2 oxidation resistant coating for carbon/carbon composites by a two-step pack cementation , 2009 .

[23]  R. Speyer,et al.  Effect of SiC, TaB_2 and TaSi_2 additives on the isothermal oxidation resistance of fully dense zirconium diboride , 2009 .

[24]  W. Bo,et al.  SiCn/SiC oxidation protective coating for carbon/carbon composites , 2009 .

[25]  Ke‐long Huang,et al.  Structural characteristics and formation mechanisms of crack-free multilayer TaC/SiC coatings on carbon-carbon composites , 2008 .

[26]  R. Luo,et al.  Oxidation resistance of a gradient self-healing coating for carbon/carbon composites , 2007 .

[27]  Hongbo Zhang,et al.  Microstructure and ablation performances of dual-matrix carbon/carbon composites , 2006 .

[28]  Min Huang,et al.  Double-layer oxidation protective SiC/Cr–Al–Si coating for carbon–carbon composites , 2006 .

[29]  Xiaohong Shi,et al.  Silicon carbide coating to protect carbon/carbon composites against oxidation , 2005 .

[30]  R. Luo,et al.  Oxidation behavior and protection of carbon/carbon composites prepared using rapid directional diffused CVI techniques , 2002 .

[31]  Soojin Park,et al.  The effects of MoSi2 on the oxidation behavior of carbon/carbon composites , 2001 .

[32]  Carlo G. Pantano,et al.  Silicon Oxycarbide Glasses , 1999 .

[33]  F. Babonneau,et al.  Structural Characterization and High‐Temperature Behavior of Silicon Oxycarbide Glasses Prepared from Sol‐Gel Precursors Containing Si‐H Bonds , 1995 .

[34]  R. Naslain,et al.  Kinetics and Mechanisms of Oxidation of 2D Woven C/SiC Composites: II, Theoretical Approach , 1994 .

[35]  G. Camus,et al.  Kinetics and Mechanisms of Oxidation of 2D Woven C/SiC Composites: I, Experimental Approach , 1994 .

[36]  Robert H. Doremus,et al.  Silicon oxycarbide glasses: Part II. Structure and properties , 1991 .

[37]  Xiaohong Shi,et al.  Influence of SiC additive on the ablation behavior of C/C composites modified by ZrB2–ZrC particles under oxyacetylene torch , 2014 .

[38]  Xiaohong Shi,et al.  Effect of LaB6 on the thermal shock property of MoSi2-SiC coating for carbon/carbon composites , 2013 .

[39]  R. Rawlings,et al.  Mechanical properties in compression of CVI-densified porous carbon/carbon composite , 1999 .

[40]  K. Niihara,et al.  Synthesis and mechanical properties of Mo =5Si 3C =1 and Mo =5Si 3C =1-based composites , 1998 .

[41]  R. Rawlings,et al.  Microstructural investigation of low-density carbon-carbon composites , 1994 .