论文信息 - FINAL CLEANING AND ASSEMBLY

FINAL CLEANING AND ASSEMBLY

For high gradients at high Q-values in superconducting (s.c.) cavities the final cleaning and assembly procedures are of well-known importance. Starting from the experiences with the standard processes used for 1.3 GHz nine-cell cavities of the TESLA Test Facility at DESY, various methods of cleaning, assembly, drying and pumping are presented. Improvements of the established procedures as well as some alternative approaches are discussed.

Detlef Reschke

[1] A. Matheisen,et al. CONTROL OF PARTICLE CONTAMINATION WITH LIQUID AND AIR PARTICLE COUNTERS DURING PREPARATION OF THE TTF 1.3 GHZ RESONATORS , 1997 .

[2] K. SAITO. Recent Developments in SRF Cavity Cleaning Techniques at KEK , 2000 .

[3] D. Proch,et al. DRY ICE CLEANING FOR SRF APPLICATIONS , 2001 .

[4] H. Padamsee,et al. RF superconductivity for accelerators , 1998 .

[5] Lutz Lilje,et al. Experimental Investigations on Superconducting Niobium Cavities at Highest Radiofrequency Fields , 2001 .

[6] C. Antoine,et al. Alternative approaches for surface treatment of Nb superconducting cavities , 1999 .

[7] E. Kako,et al. ACHIEVEMENT OF 40 MV/m ACCELERATING FIELD IN L-BAND SCC AT KEK , 1997 .

[8] Detlef Reschke. New Aspects of Quality Control during Preparation of TTF 1 . 3 GHz Cavities , 1999 .

[9] Peter Kneisel,et al. Study of Ultra-clean Surface for Niobium SC Cavities , 1994 .

[10] Lutz Lilje,et al. High accelerating gradients in 1.3 GHz niobium cavities , 2001 .

[11] D. Hubert,et al. A New Flange Design for the Superconducting Cavities for TESLA , 1997 .

[12] O. Hensler,et al. OIL-FREE PUMP STATIONS FOR PUMPING OF THE SUPERCONDUCTING CAVITIES OF THE TESLA TEST FACILITY , 2001 .

[13] Kenji Saito,et al. SUPERIORITY OF ELECTROPOLISHING OVER CHEMICAL POLISHING ON HIGH GRADIENTS , 1998 .

[14] D. Bloess. CHEMISTRY AND SURFACE TREATMENT , 1984 .