Mechanical and environmental characteristics of bituminous mixtures with incinerator bottom ash aggregates

Incinerator bottom ash is a material removed from the grating at the bottom of energy-from-waste plants. This ash has traditionally been land-filled. However, this ash could be processed to produce incinerator bottom ash aggregate (IBAA). Due to the low density and high stiffness of IBAA, it has become widely used as a secondary aggregate material especially in road construction. It is chemically inert, with very low concentrations of soluble materials. Despite this increase in IBAA use, higher usage still is desirable. To achieve this aim, the mechanical and leaching properties of bituminous mixtures containing high levels of IBAA merit further exploration. In this paper, an experimental investigation was undertaken to explore the mechanical and environmental characteristics of bituminous mixtures containing high IBAA contents. Three different mixtures were studied containing 30, 60 and 80% IBAA. A limestone blend, used as a reference mix, was also included. To evaluate the mechanical properties, the effect of IBAA content on indirect tensile stiffness modulus was investigated. The sensitivity to moisture ingress was also studied. The British Board of Agrément regime was adopted and used for this purpose. In addition, an accelerated oven-ageing procedure was applied on samples to study the age-hardening effect on their stiffness. Subsequently, uniaxial compression tests were carried out to study the effect of IBAA on bituminous mixtures' rutting resistance. As regards to the environmental characteristics, mixtures were tested for their leaching potential and the constituent concentrations in their leachates were determined for compacted bituminous and loose non-bituminous blends. The agitated extraction and the tank leaching tests were used for this objective. Results showed that, generally, replacing limestone with IBAA in bituminous mixtures improved their stiffness, excluding 80% IBAA content mix. Moreover, it was found that water ingress had a limited effect on IBAA bituminous mixtures' properties while age hardening has a more significant effect. IBAA was, generally, found to improve the bituminous mixtures' rutting resistance. Leaching test results showed that most leachate constituents were found to be within allowable limits. Despite this, diffusion and diffusion coefficient results highlighted the importance of investigating the potential effects of sulphate leaching on the environment. Finally, a one diffusion dimensional model was used as the worst case scenario tool to predict cumulative release from IBAA bituminous mixtures.

[1]  M Nunn.  THE INDIRECT TENSILE STIFFNESS MODULUS TEST , 1997 .

[2]  V. Bruder-Hubscher,et al.  Utilisation of bottom ash in road construction: evaluation of the environmental impact , 2001, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[3]  Chris Zevenbergen,et al.  Geochemical factors controlling the mobilization of major elements during weathering of MSWI bottom ash , 1994 .

[4]  Norman W. Garrick,et al.  EVALUATION OF DOMESTIC INCINERATOR ASH FOR USE AS AGGREGATE IN ASPHALT CONCRETE , 1993 .

[5]  R. Bialucha.  LEACHING STANDARD FOR QUALITY CONTROL OF AGGREGATES , 2000 .

[6]  J. Westwater,et al.  The Mathematics of Diffusion. , 1957 .

[7]  A. Collop,et al.  Permanent Deformation In Idealised “Sand Asphalt” Bituminous Mixtures , 2001 .

[8]  J.J.J.M Goumans,et al.  Environmental Aspects Of Construction With Waste Materials , 1994 .

[9]  Ch.F. Hendriks,et al.  Verification of laboratory - field leaching behavior of coal fly ash and MSWI bottom ash as a roadbase material , 1997 .

[10]  J. Meima,et al.  Overview of geochemical processes controlling leaching characteristics of MSWI bottom ash , 1997 .

[11]  I. Ward.  Review: The yield behaviour of polymers , 1971 .

[12]  T. Taylor Eighmy,et al.  An approach for estimation of contaminant release during utilization and disposal of municipal waste combustion residues , 1996 .

[13]  Ann-Marie Fällman.  Performance and Design of the Availability Test for Measurement of Potentially Leachable Amounts from Waste Materials , 1997 .

[14]  J. Rimstidt,et al.  Interaction of municipal solid waste ash with water. , 1994, Environmental science & technology.

[15]  Hilary I. Inyang,et al.  Gradation Control of Bottom Ash Aggregate in Superpave Bituminous Mixes , 2004 .

[16]  M. M. Cross.  Rheology of non-Newtonian fluids: A new flow equation for pseudoplastic systems , 1965 .

[17]  Safwat Said.  Aging Effect on Mechanical Characteristics of Bituminous Mixtures , 2005 .

[18]  Chi Yue Cheung.  Mechanical behaviour of bitumens and bituminous mixes. , 1995 .

[19]  T. Taylor Eighmy,et al.  INFLUENCE OF VOID CHANGE, CRACKING, AND BITUMEN AGING ON DIFFUSIONAL LEACHING BEHAVIOR OF PAVEMENT MONOLITHS CONSTRUCTED WITH MSW COMBUSTION BOTTOM ASH , 1995 .

[20]  M. Anderson,et al.  Qualitative model of heterogeneous equilibriums in a fly ash pond , 1978 .

[21]  V. Deshpande.  Steady-state deformation behaviour of bituminous mixes , 1997 .

[22]  Peter Baccini,et al.  Chemical behaviour of municipal solid waste incinerator bottom ash in monofills , 1992 .

[23]  Serji N. Amirkhanian,et al.  Coal Ash Utilization in Asphalt Concrete Mixtures , 1999 .

[24]  David L. Gress,et al.  Utilization of Municipal Solid Waste Combustion Bottom Ash as a Paving Material , 1999 .

[25]  G. Barton.  The Mathematics of Diffusion 2nd edn , 1975 .

[26]  Menglan Zeng,et al.  Evaluation of Moisture Susceptibility of Asphalt Mixtures Containing Bottom Ash , 2003 .

[27]  R. Comans,et al.  The leaching of major and trace elements from MSWI bottom ash as a function of pH and time , 2006 .

[28]  B Chaddock,et al.  ACCELERATED AND FIELD CURING OF BITUMINOUS ROADBASE , 1994 .

[29]  D. Hoede,et al.  Validation of Dutch standard leaching tests using NEN-ISO 5725 , 1994 .

[30]  V. Deshpande,et al.  Uniaxial Experiments on Idealized Asphalt Mixes , 2000 .