Microstructural and segregation effects affecting the corrosion behavior of a high‐temperature Bi‐Ag solder alloy in dilute chloride solution

[1]  A. Mogoda.  Electrochemical behaviour of bismuth in HCl solutions , 2020, Bulletin of Materials Science.

[2]  Rudimylla S. Septimio,et al.  Correlation between microstructure and corrosion behaviour of Bi-Zn solder alloys , 2019, Corrosion Engineering, Science and Technology.

[3]  N. Lee,et al.  A Brief Review on High-Temperature, Pb-Free Die-Attach Materials , 2018, Journal of Electronic Materials.

[4]  Wei Sun,et al.  Passivation and Pitting Corrosion Behavior of a Novel Alloy Steel (00Cr10MoV) in Simulated Concrete Pore Solution , 2018, Journal of Materials in Civil Engineering.

[5]  M. Aliofkhazraei,et al.  Interpretation of Cyclic Potentiodynamic Polarization Test Results for Study of Corrosion Behavior of Metals: A Review , 2018, Protection of Metals and Physical Chemistry of Surfaces.

[6]  Frede Blaabjerg,et al.  On-line solder layer degradation measurement for SiC-MOSFET modules under accelerated power cycling condition , 2018, Microelectron. Reliab..

[7]  Wenguo Xu,et al.  Fabrication of bismuth superhydrophobic surface on zinc substrate , 2018, Journal of Solid State Chemistry.

[8]  Baosong Li.  Passivation and Corrosion Behavior of P355 Carbon Steel in Simulated Concrete Pore Solution at pH 12.5 to 14 , 2017 .

[9]  H. Abé,et al.  Corrosion Behavior of Lead-Free Copper Alloy Castings and Their Crystallized Substances of Cu2S and Bi , 2017, Journal of the Japan Institute of Metals and Materials.

[10]  Erik Poloni,et al.  Immersion Corrosion of Sn-Ag and Sn-Bi Alloys as Successors to Sn-Pb Alloy with Electronic and Jewelry Applications , 2016 .

[11]  José E. Spinelli,et al.  Solder/substrate interfacial thermal conductance and wetting angles of Bi–Ag solder alloys , 2016, Journal of Materials Science: Materials in Electronics.

[12]  K. Suganuma,et al.  Electrochemical behavior of Sn-xZn lead-free solders in aerated NaCl solution , 2015, 2015 16th International Conference on Electronic Packaging Technology (ICEPT).

[13]  Amauri Garcia,et al.  Electrochemical and Mechanical Behavior of Lead-Silver and Lead-Bismuth Casting Alloys for Lead-Acid Battery Components , 2015, Metallurgical and Materials Transactions A.

[14]  K. Suganuma,et al.  The role of Zn precipitates and Cl− anions in pitting corrosion of Sn–Zn solder alloys , 2015 .

[15]  José E. Spinelli,et al.  The use of a directional solidification technique to investigate the interrelationship of thermal parameters, microstructure and microhardness of Bi-Ag solder alloys , 2014 .

[16]  José E. Spinelli,et al.  Microstructure, phases morphologies and hardness of a Bi–Ag eutectic alloy for high temperature soldering applications , 2014 .

[17]  Abdollah Hajalilou,et al.  Effects of Silver and Antimony Content in Lead-Free High-Temperature Solders of Bi-Ag and Bi-Sb on Copper Substrate , 2014, Journal of Electronic Materials.

[18]  Roman Koleňák,et al.  Characteristics and properties of Bi‐11Ag solder , 2013 .

[19]  A. G. Berezhnaya,et al.  Anodic behavior of bismuth in chloride solution , 2013, Protection of Metals and Physical Chemistry of Surfaces.

[20]  M. Rappaz,et al.  Microstructure formation in Sn-Cu-Ni solder alloys , 2011 .

[21]  ザン，ホンウェン,et al.  Mixed alloy solder paste , 2011 .

[22]  M. Rappaz,et al.  Effects of solidification kinetics on microstructure formation in binary Sn-Cu solder alloys , 2011 .

[23]  M. Kliškić,et al.  The effect of small addition of tin and indium on the corrosion behavior of aluminium in chloride solution , 2010 .

[24]  Jenn-Ming Song,et al.  Electrochemical corrosion behaviour of Bi–11Ag alloy for electronic packaging applications , 2010 .

[25]  Jenn-Ming Song,et al.  Faceting Behavior of Primary Ag in Bi-Ag Alloys for High Temperature Soldering Applications , 2009 .

[26]  Mark E. Orazem,et al.  Electrochemical Impedance Spectroscopy: Orazem/Electrochemical , 2008 .

[27]  Jenn-Ming Song,et al.  Interfacial reactions between Bi-Ag high-temperature solders and metallic substrates , 2006 .

[28]  M. Chmielewski,et al.  Reactive metallic layers produced on AlN, Si3N4 and SiC ceramics , 2004 .

[29]  Nestor Perez,et al.  Electrochemistry and Corrosion Science , 2004 .

[30]  Nancy F. Dean,et al.  Experimental investigation of Ge-doped Bi-11Ag as a new Pb-free solder alloy for power die attachment , 2002 .

[31]  Hyuck-Mo Lee,et al.  Thermodynamics-Aided Alloy Design and Evaluation of Pb-free Solders for High-Temperature Applications , 2002 .

[32]  Mustafa Gündüz,et al.  Directional solidification of aluminium -copper alloys , 2002 .

[33]  M. Abtew,et al.  Lead-free Solders in Microelectronics , 2000 .

[34]  Florian Mansfeld,et al.  Electrochemical impedance spectroscopy (EIS) as a new tool for investigating methods of corrosion protection , 1990 .

[35]  R. Koleňák,et al.  Fluxless ultrasonic soldering of SiC ceramics and Cu by Bi–Ag–Ti based solder , 2020 .

[36]  C. Vargel.  Pitting corrosion , 2020, Corrosion of Aluminium.

[37]  Rudimylla S. Septimio,et al.  Effects of Macrosegregation and Microstructure on the Corrosion Resistance and Hardness of a Directionally Solidified Zn-5.0wt.%Mg Alloy , 2019, Materials Research.

[38]  Vadimas Verdingovas,et al.  Corrosion in electronics: Overview of failures and countermeasures , 2014 .

[39]  R. Johnson,et al.  Lead-free Solder Attach for 200°C Applications , 2013 .

[40]  Su-Moon Park,et al.  Electrochemical impedance spectroscopy. , 2010, Annual review of analytical chemistry.

[41]  Petr Vanýsek,et al.  ELECTROCHEMICAL SERIES , 2010 .

[42]  A. Zielonka,et al.  Structure and properties of electrodeposited silver–bismuth alloys , 2004 .

[43]  Marcel Pourbaix,et al.  Introduction to Corrosion , 1973 .