Characterization of calcium-containing phases in alkali-activated municipal solid waste incineration bottom ash binder through chemical extraction and deconvoluted Fourier transform infrared spectra

Abstract It has been reported that municipal solid waste incineration bottom ash (IBA) can be a potential precursor for alkali-activated materials (AAM). This study investigates chemical composition and structure of calcium-containing phases in an alkali-activated IBA (AA-IBA) binder by a novel combination of selective chemical extraction and Fourier transform infrared (FTIR) spectral subtraction and deconvolution. Salicylic acid/methanol extraction is used to isolate the calcium-containing phases from the AA-IBA binder. X-ray powder diffraction and FTIR spectroscopy are used for sample characterization. Spectral subtraction is carried out to assign FTIR peaks of calcium-containing phases and deconvolution is used to discover various individual Si-O peaks hidden in the single broad FTIR peak. Results show that the AA-IBA consists of about 20 wt.% calcium silicate hydrate (C-S-H) and pirssonite (Na 2 Ca(CO 3 ) 2 ·2H 2 O). Chemical structure of the C-S-H in AA-IBA is found to be broadly similar to that in aged Portland cement paste, with possibly a higher degree of polymerization of the silicate chains. The methodology established in this study is significant and can greatly benefit the development of sustainable construction materials because many industry by-products and solid wastes are Si and/or Al rich, which could be potential AAM precursor.

[1]  Luisa Barbieri,et al.  Alkali activation processes for incinerator residues management. , 2013, Waste management.

[2]  F. A. Miller,et al.  Infrared Spectra and Characteristic Frequencies of Inorganic Ions , 1952 .

[3]  En-Hua Yang,et al.  Feasibility study on utilization of municipal solid waste incineration bottom ash as aerating agent for the production of autoclaved aerated concrete , 2015 .

[4]  Yang Lv,et al.  Utilization of municipal solid waste incineration bottom ash in blended cement , 2012 .

[5]  F. B. Reig,et al.  FTIR quantitative analysis of calcium carbonate (calcite) and silica (quartz) mixtures using the constant ratio method. Application to geological samples. , 2002, Talanta.

[6]  Paul F. McMillan,et al.  Structure of Calcium Silicate Hydrate (C‐S‐H): Near‐, Mid‐, and Far‐Infrared Spectroscopy , 2004 .

[7]  X. Cong,et al.  Raman spectroscopy of C-S-H, tobermorite, and jennite , 1997 .

[8]  Somnuk Tangtermsirikul,et al.  Properties of cement made by partially replacing cement raw materials with municipal solid waste ashes and calcium carbide waste , 2004 .

[9]  L. Helsen,et al.  The crucial role of Waste-to-Energy technologies in enhanced landfill mining: a technology review , 2013 .

[10]  J. Deventer,et al.  The Role of Inorganic Polymer Technology in the Development of ‘Green Concrete’ , 2007 .

[11]  Prinya Chindaprasirt,et al.  Use of municipal solid waste incinerator (MSWI) bottom ash in high calcium fly ash geopolymer matrix , 2017 .

[12]  S. Alonso,et al.  Alkaline activation of metakaolin and calcium hydroxide mixtures: influence of temperature, activator concentration and solids ratio , 2001 .

[13]  F. Glasser,et al.  Alkali binding in cement pastes: Part I. The C-S-H phase , 1999 .

[14]  M. Hunger,et al.  FTIR study of weak hydrogen bonding of Broensted hydroxyls in zeolites and aluminophosphates , 1994 .

[15]  S. Grangeon,et al.  X-ray diffraction: a powerful tool to probe and understand the structure of nanocrystalline calcium silicate hydrates , 2013, Acta crystallographica Section B, Structural science, crystal engineering and materials.

[16]  S. Martínez-Ramírez,et al.  Alkali-activated fly ash/slag cements: Strength behaviour and hydration products , 2000 .

[17]  L. Glasser,et al.  Drying of sodium silicate solutions , 2007 .

[18]  Longtu Li,et al.  A review: The comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements , 2010 .

[19]  J. M. Chimenos,et al.  Characterization of the bottom ash in municipal solid waste incinerator , 1999 .

[20]  Ena Smidt,et al.  The applicability of Fourier transform infrared (FT-IR) spectroscopy in waste management. , 2007, Waste management.

[21]  J. Davidovits.  Geopolymer chemistry and applications , 2008 .

[22]  D. Többens,et al.  K2Ca6Si4O15-structural and spectroscopical studies on a mixed tetrahedral-octahedral framework , 2009 .

[23]  Agnieszka Różycka,et al.  Incorporation of Al in C-A-S-H gels with various Ca/Si and Al/Si ratio: Microstructural and structural characteristics with DTA/TG, XRD, FTIR and TEM analysis , 2017 .

[24]  H. Brouwers,et al.  Characterization and application of municipal solid waste incineration (MSWI) bottom ash and waste granite powder in alkali activated slag , 2017 .

[25]  D. Macphee,et al.  Effect of Alkalis on Fresh C-S-H Gels. FTIR Analysis , 2009 .

[26]  L. Struble,et al.  Method to Stop Geopolymer Reaction , 2014 .

[27]  J. Provis.  Geopolymers and other alkali activated materials: why, how, and what? , 2014 .

[28]  R. Pena Penilla,et al.  Zeolite Synthesized by Alkaline Hydrothermal Treatment of Bottom Ash from Combustion of Municipal Solid Wastes , 2003 .

[29]  Hao Wang,et al.  Fly ash-based geopolymer: clean production, properties and applications , 2016 .

[30]  Ole Hjelmar,et al.  Utilisation of MSWI bottom ash as sub-base in road construction: first results from a large-scale test site. , 2007, Journal of hazardous materials.

[31]  V. Rose,et al.  Effect of silicate modulus and metakaolin incorporation on the carbonation of alkali silicate-activated slags , 2010 .

[32]  En-Hua Yang,et al.  Incinerator bottom ash (IBA) aerated geopolymer , 2016 .

[33]  I. Lancellotti,et al.  Incinerator Bottom Ash and Ladle Slag for Geopolymers Preparation , 2014 .

[34]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[35]  C. Shi,et al.  New cements for the 21st century: The pursuit of an alternative to Portland cement , 2011 .

[36]  Á. Palomo,et al.  Compatibility studies between N-A-S-H and C-A-S-H gels. Study in the ternary diagram Na2O–CaO–Al2O3–SiO2–H2O , 2011 .

[37]  Ángel Palomo,et al.  Alkali activation of fly ash: Effect of the SiO2/Na2O ratio Part I: FTIR study , 2007 .

[38]  R. Cloots,et al.  (Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement , 2006 .

[39]  Nakamichi Yamasaki,et al.  Hydrothermal Synthesis of a Novel Tobermorite-Based Porous Material from Municipal Incineration Bottom Ash , 2007 .

[40]  C. K. HuaNc,et al.  Infrared study of the carbonate minerals , 1960 .

[41]  N. Vagenas,et al.  Quantitative analysis of synthetic calcium carbonate polymorphs using FT-IR spectroscopy. , 2003, Talanta.

[42]  Hai Ying Zhang,et al.  Use of Municipal Solid Waste Incineration Bottom Ash in Adsorption of Heavy Metals , 2011 .

[43]  Deepak Ravikumar,et al.  Effects of activator characteristics on the reaction product formation in slag binders activated using alkali silicate powder and NaOH , 2012 .

[44]  L. Struble,et al.  Effect of calcium–silicon ratio on microstructure and nanostructure of calcium silicate hydrate synthesized by reaction of fumed silica and calcium oxide at room temperature , 2014 .

[45]  A. Nonat,et al.  C-S-H Structure Evolution with Calcium Content by Multinuclear NMR , 1998 .

[46]  A. Fernández-Jiménez,et al.  FTIR study of the sol–gel synthesis of cementitious gels: C–S–H and N–A–S–H , 2008 .

[47]  Y. Owusu.  Physical-chemistry study of sodium silicate as a foundry sand binder , 1982 .

[48]  S. Abo-El-Enein,et al.  Hydrothermal synthesis and characterization of aluminium and sulfate substituted 1.1 nm tobermorites , 2009 .

[49]  P. Mondal,et al.  Co-existence of aluminosilicate and calcium silicate gel characterized through selective dissolution and FTIR spectral subtraction , 2015 .

[50]  P. King,et al.  A new approach to determine and quantify structural units in silicate glasses using micro-reflectance Fourier-Transform infrared spectroscopy , 2006 .

[51]  L. Struble.  The effect of water on maleic acid and salicylic acid extractions , 1985 .

[52]  W. Kuo,et al.  Use of washed municipal solid waste incinerator bottom ash in pervious concrete , 2013 .

[53]  Stefano Ferrari,et al.  Chemical speciation of carbon in municipal solid waste incinerator residues. , 2002, Waste management.

[54]  Christopher R. Cheeseman,et al.  Novel cementitious materials produced from incinerator bottom ash , 2008 .

[55]  M. Catauro,et al.  Geopolymers: An option for the valorization of incinerator bottom ash derived "end of waste" , 2015 .