Preparation and characterization of porous silica xerogel film for low dielectric application

Abstract SiO 2 xerogel thin film with a low dielectric constant was successfully prepared by a two-step acid-base catalyst procedure and successive surface modification with trimethylchlorosilane (TMCS). Only 15% porosity could be obtained without surface modification but with surface modification the porosity increased to 50%. These porosity values correspond to measured dielectric constants of 3.95 and 2.45, respectively. The low dielectric constant was revealed to depend mainly on the porous structure of xerogel thin film obtained with surface modification. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analyses were carried out to evaluate the effect of surface modification which induces the changes of surface coverage from –OC 2 H 5 and –OH to –CH 3 . Rutherford backscattering spectrometry analysis gave the porosity of SiO 2 xerogel thin film as 47.5%. The porosity estimation using refractive index obtained from Ellipsometry work was 43.2% and agrees well with RBS analysis. The network structure of SiO 2 xerogel was also evaluated with scanning electron microscopy and transmission electron microscopy.

[1]  L. Hrubesh,et al.  Dielectric properties of aerogels , 1993 .

[2]  L. Niemeyer,et al.  Electrical and infrared dielectrical properties of silica aerogels and of silica-aerogel-based composites , 1993 .

[3]  Donald R. Ulrich,et al.  Ultrastructure processing of advanced ceramics , 1988 .

[4]  C. Brinker,et al.  Silica aerogel films at ambient pressure , 1995 .

[5]  C. Brinker,et al.  Silica aerogel films prepared at ambient pressure by using surface derivatization to induce reversible drying shrinkage , 1995, Nature.

[6]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[7]  M Martignoni,et al.  [Silane coupling agents]. , 1990, Attualita dentale.

[8]  C. Brinker.  Sol-gel science , 1990 .

[9]  Sang Hyun,et al.  Evaluation of SiO 2 aerogel thin film with ultra low dielectric constant as an intermetal dielectric , 1997 .

[10]  Kwang-Ho Kwon,et al.  Characterization and removal of silicon surface residue resulting from CHF3/C2F6 reactive ion etching , 1994 .

[11]  U. Merkt,et al.  Plasma-enhanced chemically vapour-deposited silicon dioxide for metal/oxide/semiconductor structures on InSb , 1982 .

[12]  Lawrence W. Hrubesh,et al.  Thin aerogel films for optical, thermal, acoustic and electronic applications , 1995 .

[13]  H. Hirashima,et al.  Preparation of V2O5 aerogels and aerogel coatings , 1992 .

[14]  S. Henning,et al.  Production of Silica Aerogel , 1981 .

[15]  Lakhmi C. Jain,et al.  Microelectronic engineering , 1995, Proceedings Electronic Technology Directions to the Year 2000.