High heat flux testing of plasma facing materials and components – Status and perspectives for ITER related activities
暂无分享,去创建一个
J. Linke | F. Escourbiac | I. Mazul | R. Nygren | M. Rödig | J. Schlosser | S. Suzuki
[1] R. Raffray,et al. ITER Divertor, Design Issues and Research and Development , 1999 .
[2] High heat flux behaviour of damaged plasma facing components , 2001 .
[3] Martin Jakobi,et al. Transport into and across the scrape-off layer in the ASDEX Upgrade divertor tokamak , 2002 .
[4] C. H. Wu,et al. Material/Plasma Surface Interaction Issues Following Neutron Damage , 2003 .
[5] J. Linke,et al. Brittle destruction of carbon-based materials in transient heat load tests , 2003 .
[6] P. Barabaschi,et al. Key ITER plasma edge and plasma–material interaction issues , 2003 .
[7] M. Merola,et al. Flat Tile Armour Cooled by Hypervapotron Tube: a Possible Technology for ITER , 2004 .
[8] R. Neu,et al. Materials for plasma facing components of fusion reactors , 2004 .
[9] M. Merola,et al. Post irradiation testing of samples from the irradiation experiments PARIDE 3 and PARIDE 4 , 2004 .
[10] K. Ezato,et al. Thermal fatigue experiment of screw cooling tube under one-sided heating condition , 2004 .
[11] Koichiro Ezato,et al. ITER Relevant High Heat Flux Testing on Plasma Facing Surfaces , 2005 .
[12] I. Šmid,et al. Material Processing and Testing of Plasma-Interactive Components for Fusion Energy Systems , 2005 .
[13] K. Ioki,et al. Manufacture of blanket shield modules for ITER , 2005 .