Microstructural evolution mechanism of plain-woven SiC/SiC during thermal ablation

[1]  Dezhen Wu,et al.  Synergetic effects of Kevlar fibers and polyimide powder fillers on performances of Poly(diaryloxyphosphazene) based elastomeric heat shielding materials , 2022, Composites Science and Technology.

[2]  Z. Ni,et al.  Ultra-high temperature ablation behavior of 2.5D SiC/SiC under an oxy-acetylene torch , 2022, Corrosion Science.

[3]  Shangwu Fan,et al.  Ablation performance of C/HfC-SiC composites with in-situ HfSi2/HfC/SiC multi-phase coatings under 3000℃ oxyacetylene torch , 2022, Corrosion Science.

[4]  Yu Guoqiang,et al.  Adopting traditional image algorithms and deep learning to build the finite model of a 2.5D composite based on X-Ray computed tomography , 2021 .

[5]  Fang Wang,et al.  Morphology and microstructure of SiC/SiC composites ablated by oxyacetylene torch at 1800°C , 2021 .

[6]  Xue Feng,et al.  Revealing thermal ablation mechanisms of C/SiC with in situ optical observation and numerical simulation , 2020 .

[7]  Xue Feng,et al.  Evolution of surface droplets and flow patterns on C/SiC during thermal ablation , 2019, Journal of the European Ceramic Society.

[8]  T. Gereke,et al.  A review of numerical models for 3D woven composite reinforcements , 2019, Composite Structures.

[9]  Hejun Li,et al.  A Multilayer SiC/ZrB2/SiC Ablation Resistance Coating for Carbon/Carbon Composites , 2018, Advanced Engineering Materials.

[10]  B. Harder,et al.  Development of Advanced Environmental Barrier Coatings for SiC/SiC Ceramic Matrix Composites: Path Toward 2700 F Temperature Capability and Beyond , 2017 .

[11]  Chenglong Hu,et al.  Design, Preparation and Properties of Carbon Fiber Reinforced Ultra-High Temperature Ceramic Composites for Aerospace Applications: A Review , 2017 .

[12]  Nitin P. Padture,et al.  Advanced structural ceramics in aerospace propulsion. , 2016, Nature materials.

[13]  Yang Wang,et al.  Ablation behavior and mechanism analysis of C/SiC composites , 2016 .

[14]  T. Ohji,et al.  Engineered Ceramics: Current Status and Future Prospects , 2016 .

[15]  Y. Dimitrienko.  Thermomechanics of Composite Structures under High Temperatures , 2016 .

[16]  Li Wei,et al.  Ablation behavior and mechanism of SiC/Zr–Si–C multilayer coating for PIP-C/SiC composites under oxyacetylene torch flame , 2015 .

[17]  Chuan Zhang,et al.  A Combined Thermodynamic/Kinetic Modeling Approach to Predict SiC Recession Due to SiO2 Scale Volatility Under Combustion Environments , 2014 .

[18]  Aijun Li,et al.  Microstructure and ablation mechanism of C/C–SiC composites , 2014 .

[19]  H. Hu,et al.  Effects of TaC amount on the properties of 2D C/SiC–TaC composites prepared via precursor infiltration and pyrolysis , 2013 .

[20]  P. Mummery,et al.  Fabrication and characterization of 2.5D and 3D SiCf/SiC composites , 2013 .

[21]  Dongming Zhu,et al.  Evaluation of Ceramic Matrix Composite Technology for Aircraft Turbine Engine Applications , 2013 .

[22]  Fei Deng,et al.  The effect of zirconium carbide on ablation of carbon/carbon composites under an oxyacetylene flame , 2011 .

[23]  Li Kezhi,et al.  Microstructure and ablation properties of zirconium carbide doped carbon/carbon composites , 2010 .

[24]  G. Vignoles,et al.  Ablation of carbon-based materials: Multiscale roughness modelling , 2009 .

[25]  Zhaofeng Chen,et al.  Effects of ablation at different regions in three-dimensional orthogonal C/SiC composites ablated by oxyacetylene torch at 1800 °C , 2009 .

[26]  G. Vignoles,et al.  A Brownian motion technique to simulate gasification and its application to C/C composite ablation , 2009 .

[27]  Zhaofeng Chen,et al.  Comparison of morphology and microstructure of ablation centre of C/SiC composites by oxy-acetylene torch at 2900 and 3550 °C , 2008 .

[28]  J. Halloran,et al.  Formation of Oxide Scales on Zirconium Diboride–Silicon Carbide Composites During Oxidation: Relation of Subscale Recession to Liquid Oxide Flow , 2008 .

[29]  V. Srivastava,et al.  Effect of oxidation on elastic modulus of C/C–SiC composites , 2008 .

[30]  G. Vignoles,et al.  Analytical modeling of the steady state ablation of a 3D C/C composite , 2008 .

[31]  Takeshi Nakamura,et al.  Development of CMC Vane for Gas Turbine Engine , 2008 .

[32]  Jiecai Han,et al.  Oxidation-resistant ZrB2-SiC composites at 2200 °C , 2008 .

[33]  Ke Yang,et al.  Ablation behaviors of ultra-high temperature ceramic composites , 2007 .

[34]  Ronald Scott Bunker,et al.  Gas Turbine Heat Transfer: Ten Remaining Hot Gas Path Challenges , 2007 .

[35]  Stephan Schmidt,et al.  Advanced ceramic matrix composite materials for current and future propulsion technology applications , 2004 .

[36]  James L. Smialek,et al.  SiC Recession Caused by SiO2 Scale Volatility under Combustion Conditions: I, Experimental Results and Empirical Model , 1999 .

[37]  D. Schmidt.  Ablative Polymers in Aerospace Technology , 1969 .