Advanced EUV mask and imaging modeling
暂无分享,去创建一个
[1] E. Hendrickx,et al. Physical resist models and their calibration: their readiness for accurate EUV lithography simulation , 2010, Advanced Lithography.
[2] Iwao Nishiyama,et al. Quantifying EUV imaging tolerances for the 70-, 50-, 35-nm modes through rigorous aerial image simulations , 2001, SPIE Advanced Lithography.
[3] Jean-Pierre Berenger,et al. A perfectly matched layer for the absorption of electromagnetic waves , 1994 .
[4] Andreas Erdmann,et al. Simulation of extreme ultraviolet masks with defective multilayers , 2003, Photomask Japan.
[5] Joerg Bischoff,et al. Scatterometry modeling for gratings with roughness and irregularities , 2016, SPIE Advanced Lithography.
[6] Peter Evanschitzky,et al. Extended Abbe approach for fast and accurate lithography imaging simulations , 2009, European Mask and Lithography Conference.
[7] Vicky Philipsen,et al. Reducing EUV mask 3D effects by alternative metal absorbers , 2017, Advanced Lithography.
[8] Jo Finders,et al. Illumination pupil optimization in 0.33-NA extreme ultraviolet lithography by intensity balancing for semi-isolated dark field two-bar M1 building blocks , 2016 .
[9] Thomas K. Gaylord,et al. Stable implementation of the rigorous coupled-wave analysis for surface-relief gratings: enhanced transmittance matrix approach , 1995 .
[10] Kevin D. Lucas,et al. Efficient and rigorous three-dimensional model for optical lithography simulation , 1996 .
[11] Stephen Hsu,et al. EUV resolution enhancement techniques (RETs) for k1 0.4 and below , 2015, Advanced Lithography.
[12] Feng Shao,et al. Lithography simulation: modeling techniques and selected applications , 2009, Optical Metrology.
[13] H. Hopkins. On the diffraction theory of optical images , 1953, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.
[14] Peter De Bisschop,et al. Validity of the Hopkins approximation in simulations of hyper-NA (NA>1) line-space structures for an attenuated PSM mask , 2006, SPIE Advanced Lithography.
[15] Feng Shao,et al. Simulation of larger mask areas using the waveguide method with fast decomposition technique , 2007, SPIE Photomask Technology.
[16] Martin Burkhardt,et al. Best focus shift mechanism for thick masks , 2015, Advanced Lithography.
[17] Andrew R. Neureuther,et al. Simplified model for absorber feature transmissions on EUV masks , 2006, SPIE Photomask Technology.
[18] M.. Certain computational aspects of vector diffraction problems , 2002 .
[19] Chandraprakash Chindam. Fourier Modal Method and Its Applications in Computational Nanophotonics , 2012 .
[20] Michael C. Lam,et al. Flare in extreme ultraviolet lithography: metrology, out-of-band radiation, fractal point-spread function, and flare map calibration , 2009 .
[21] Andrew R. Neureuther,et al. Fast simulation methods and modeling for extreme ultraviolet masks with buried defects , 2009 .
[22] M R Taghizadeh,et al. Analysis of gratings with large periods and small feature sizes by stitching of the electromagnetic field. , 1996, Optics letters.
[23] Lifeng Li,et al. Use of Fourier series in the analysis of discontinuous periodic structures , 1996 .
[24] Khanh Nguyen,et al. Effects of absorber topography and multilayer coating defects on reflective masks for soft x-ray/EUV projection lithography , 1993, Advanced Lithography.
[25] A. Hawryluk,et al. Soft x‐ray projection lithography using an x‐ray reduction camera , 1988 .
[26] Vicky Philipsen,et al. Characterization and mitigation of 3D mask effects in extreme ultraviolet lithography , 2017 .
[27] C. Mack. Analytic form for the power spectral density in one, two, and three dimensions , 2011 .
[28] Andreas Erdmann,et al. Fast near field simulation of optical and EUV masks using the waveguide method , 2007, European Mask and Lithography Conference.
[29] Guido Schiffelers,et al. NXE:3300B platform: imaging applications for Logic and DRAM , 2013, Other Conferences.
[30] Feng Shao,et al. Efficient simulation of extreme ultraviolet multilayer defects with rigorous data base approach , 2013 .
[31] Peter Evanschitzky,et al. Three dimensional EUV simulations: a new mask near field and imaging simulation system , 2005, SPIE Photomask Technology.
[32] Daniel Wintz,et al. Photon flux requirements for extreme ultraviolet reticle imaging in the 22- and 16-nm nodes , 2010 .
[33] Andrew R. Neureuther,et al. Simplified models for edge transitions in rigorous mask modeling , 2001, SPIE Advanced Lithography.
[34] Yunfei Deng,et al. Extreme ultraviolet mask defect simulation: Low-profile defects , 2000 .
[35] Ronald L. Gordon,et al. Mask topography simulation for EUV lithography , 1999, Advanced Lithography.
[36] A. Wong. Optical Imaging in Projection Microlithography , 2005 .
[37] Zhengrong Zhu,et al. METROPOLE-3D: a three-dimensional electromagnetic field simulator for EUV masks under oblique illumination , 2003, SPIE Photomask Technology.
[38] Patrick Schiavone,et al. Rigorous electromagnetic simulation of EUV masks: influence of the absorber properties , 2001 .
[39] Tsuneo Terasawa,et al. Simulation of Multilayer Defects in Extreme Ultraviolet Masks , 2001 .
[40] Stephen Hsu,et al. Application of EUV resolution enhancement techniques (RET) to optimize and extend single exposure bi-directional patterning for 7nm and beyond logic designs , 2016, SPIE Advanced Lithography.
[41] Feng Shao,et al. Fast rigorous simulation of mask diffraction using the waveguide method with parallelized decomposition technique , 2008, European Mask and Lithography Conference.
[42] Feng Shao,et al. Efficient simulation of three-dimensional EUV masks for rigorous source mask optimization and mask induced imaging artifact analysis , 2010, European Mask and Lithography Conference.
[43] Pei-yang Yan,et al. Understanding Bossung curve asymmetry and focus shift effect in EUV lithography , 2002, SPIE Photomask Technology.