Colorimetric characterization of novel multiple-channel sensors for imaging and metrology

This paper describes a new type of multichannel color sensor with the special property of having all channels per pixel at the same spatial location. This arrangement is accomplished by stacking three amorphous thin film detectors on a substrate (glass or silicon), one on tap of the other. If has the advantage that the color aliasing effect is avoided. This effect produces large color errors when objects of high spatial frequency are captured using multichannel imaging sensors with color filter arrays. The new technique enables the design of a three-channel sensor as well as a six-channel sensor, the latter being valuable even as a single-pixel device for metrology. in the six-channel case, color is captured in two "shots" by changing the bias voltages. The sensors are characterized colorimetrically, including methods such as multiple polynomial regression both for tristimulus and spectral reconstruction, and the smoothing inverse for spectral reconstruction. The results obtained with different types of regression polynomials, different sensors, and different characterization methods are compared The results shaw that the new amorphous three-channel sensors perform comparably with commercial charge coupled device cameras under the conditions tested while the six-channel's performance is striking. (C) 1999 SPIE and IS&T.

[1]  Ron Gershon,et al.  Measurement and Analysis of Object Reflectance Spectra , 1994 .

[2]  Ping-Sing Tsai,et al.  New block-matching-based color interpolation algorithm , 1998, Electronic Imaging.

[3]  Ran Ginosar,et al.  A random access photodiode array for intelligent image capture , 1991 .

[4]  Françoise Viénot,et al.  Characterization of a color-sensitive photodetector implemented in a BiCMOS technology , 1998, Electronic Imaging.

[5]  Henry R. Kang.  Color scanner calibration , 1992 .

[6]  Kevin J. Parker,et al.  Color filter arrays based on mutually exclusive blue noise patterns , 1998, Electronic Imaging.

[7]  Patrick G. Herzog,et al.  Characterization of novel three- and six-channel color moire free sensors , 1998, Electronic Imaging.

[8]  H. Stiebig,et al.  Four terminal color detector for digital signal processing , 1998 .

[9]  Bernd Rech,et al.  Texture etched Al-doped ZnO: a new material for enhanced light trapping in thin film solar cells , 1997, Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997.

[10]  Henry R. Kang,et al.  Neural network applications to the color scanner and printer calibrations , 1992, J. Electronic Imaging.

[11]  W. Luft,et al.  Hydrogenated Amorphous Silicon Alloy Deposition Processes , 1993 .

[12]  Richard L. Weisfield,et al.  Two-dimensional amorphous silicon image sensor arrays , 1996 .

[13]  Clanton E Mancill.  Digital Color Image Restoration , 1975 .

[14]  Po-chieh Hung,et al.  Colorimetric calibration for scanners and media , 1991, Electronic Imaging.

[15]  N. Yamauchi,et al.  A light-transmitting two-dimensional photodetector array using a-Si pin photodiodes and poly-Si TFT's integrated on a transparent substrate , 1994 .

[16]  Po-Chieh Hung,et al.  Colorimetric calibration in electronic imaging devices using a look-up-table model and interpolations , 1993, J. Electronic Imaging.

[17]  J. Parkkinen,et al.  Characteristic spectra of Munsell colors , 1989 .

[18]  Peter Seitz,et al.  Smart optical and image sensors fabricated with industrial CMOS/CCD semiconductor processes , 1993, Electronic Imaging.

[19]  Werner Praefcke,et al.  A multispectral scanner , 1998 .