Mechanical characterisation of the dynamic tensile properties of CFRP sheet and adhesive at medium strain rates

Abstract Unidirectional normal modulus CFRP (CF130) and Araldite 420 and MBrace saturant adhesives are now commonly used to strengthen steel and concrete structures. However, there is a lack of understanding regarding their mechanical properties under dynamic tensile loads. This paper focuses on the experimental determination of the tensile mechanical properties of such materials at quasi-static and intermediate strain rates. A drop-mass rig and an impact Instron testing machine were utilised to conduct impact tests of CFRP and epoxy. It was found that the tensile properties of CFRP and the two adhesives are strain rate-dependent, even though their general trends and percentages of enhancement differ. Considerable changes in the failure patterns of CFRP and both adhesives are observed. Empirical equations in terms of strain rates are proposed to estimate the tensile properties of CFRP and both adhesives at any strain rate within the range considered.

[1]  A. El-Habak.  Mechanical behaviour of woven glass fibre-reinforced composites under impact compression load , 1991 .

[2]  Okenwa I. Okoli,et al.  The effects of strain rate and failure modes on the failure energy of fibre reinforced composites , 2001 .

[3]  M. Cheng,et al.  Tension and compression tests of two polymers under quasi-static and dynamic loading , 2002 .

[4]  J. Harding,et al.  A tensile testing technique for fibre-reinforced composites at impact rates of strain , 1983 .

[5]  M. Benzeggagh,et al.  Comparative study of strain rate effects on mechanical properties of glass fibre-reinforced thermoset matrix composite , 1996 .

[6]  N. K. Naik,et al.  High strain rate tensile behavior of woven fabric E-glass/epoxy composite , 2010 .

[7]  Anand Deshpande.  Characterization of CFRP and GFRP composite materials at high strain rate tensile loading , 2006 .

[8]  Clive R. Siviour,et al.  Experimental characterisation and constitutive modelling of RTM-6 resin under impact loading , 2008 .

[9]  R. Shenoi,et al.  An analytical model for assessing strain rate sensitivity of unidirectional composite laminates , 2005 .

[10]  G. H. Majzoobi,et al.  A tensile impact apparatus for characterization of fibrous composites at high strain rates , 2005 .

[11]  Tsuyoshi Nishiwaki,et al.  Tensile strength of unidirectional CFRP laminate under high strain rate , 2007 .

[13]  B. E. Read,et al.  Modelling the behaviour of plastics for design under impact , 2001 .

[14]  L. C. Hollaway,et al.  Chapter 8 – Applications in advanced polymer composite constructions , 2001 .

[15]  Marco Peroni,et al.  High strain-rate compression and tension behaviour of an epoxy bi-component adhesive , 2008 .

[16]  High strain rate testing of a unidirectionally reinforced graphite epoxy composite , 2001 .

[17]  Raymond G. Boeman,et al.  Strain rate effects on the mechanical properties of polymer composite materials , 2004 .

[18]  D. Adams,et al.  Tensile Impact Tests of AS4/3501-6 and S2/3501-6 Unidirectional Composites and the 3501-6 Epoxy Matrix , 1990 .

[19]  M. Shokrieh,et al.  Tension behavior of unidirectional glass/epoxy composites under different strain rates , 2009 .

[20]  J. Lifshitz,et al.  Response of fiber-reinforced polymers to high strain-rate loading in interlaminar tension and combined tension/shear , 1998 .

[21]  Nicholas A. Warrior,et al.  Impact Test Rigs for High Strain Rate Tensile and Compressive Testing of Composite Materials , 2002 .

[22]  J. Harding,et al.  EFFECT OF STRAIN RATE ON THE TENSILE FAILURE OF WOVEN REINFORCED POLYESTER RESIN COMPOSITES , 1985 .

[23]  R. Al-Mahaidi,et al.  Effect of Impact Tensile Load on Strength of CFRP Bonded Steel Plate Joints , 2011 .

[24]  X. Zhao,et al.  State-of-the-art review on FRP strengthened steel structures , 2007 .

[25]  R. Zaera,et al.  Dynamic tensile behaviour at low temperature of CFRP using a split Hopkinson pressure bar , 2005 .

[26]  Amos Gilat,et al.  Experimental study of strain-rate-dependent behavior of carbon/epoxy composite , 2002 .

[27]  H. Kawada,et al.  Dynamic tensile properties of carbon fiber composite based on thermoplastic epoxy resin loaded in matrix-dominant directions , 2009 .

[28]  C. Ruiz,et al.  Measurement of the properties of woven CFRP T300/914 at different strain rates , 2000 .

[29]  C. Buckley,et al.  Deformation of thermosetting resins at impact rates of strain. Part I: Experimental study , 2001 .

[30]  V.P.W. Shim,et al.  An empirical strain rate-dependent constitutive relationship for glass-fibre reinforced epoxy and pure epoxy , 1995 .