Numerical investigation of heat transfer and pressure drop characteristics of tube-fin heat exchangers in ice slurry HVAC system.

Abstract This paper analyzes the heat transfer and pressure drop characteristics of a tube–fin heat exchanger in ice slurry HVAC system. Ice slurry is a suspension of crystallized water based - ice solution with a freezing point depressant like ethylene glycol. The ice- slurry is pumpable, hence it is also called pumpable ice. The composition of ice slurry considered for analysis is 14% ice fraction, 16% ethylene glycol, and 70% water by volume. It is deduced that the ice slurry HVAC system results in 7.4% increase in temperature drop over the conventional chilled water system The latent heat absorbed by ice slurry on melting makes it an attractive choice for achieving high degree of cooling. The numerical analysis was conducted by simulating the ice slurry tube flow region and air flow region of tube–fin heat exchanger in the air-handling unit of HVAC system. For the simulation six different louver patterns with 10 to 55 louver angle were considered. The design of the tube–fin heat exchanger for optimal heat transfer and pressure drop characteristics was also determined with the optimization parameter like louver angle, fin pitch, and ice slurry flow velocity.

[1]  Chi-Chuan Wang,et al.  Heat transfer and friction correlation for compact louvered fin-and-tube heat exchangers , 1999 .

[2]  M. Kawaji,et al.  Thermal and flow behavior of ice slurries in a vertical rectangular channel. Part I: Local distribution measurements in adiabatic flow , 2005 .

[3]  M. Kawaji,et al.  Thermal and flow behavior of ice slurries in a vertical rectangular channel—Part II. Forced convective melting heat transfer , 2005 .

[4]  张哉根,et al.  Leu-M , 1991 .

[5]  S. Tassou,et al.  Heat transfer and pressure drop of ice slurries in plate heat exchangers , 2002 .

[6]  Chi-Chuan Wang,et al.  A numerical investigation of louvered fin-and-tube heat exchangers having circular and oval tube configurations , 2001 .

[7]  Baris Ozerdem,et al.  Effect of geometrical parameters on heat transfer and pressure drop characteristics of plate fin and tube heat exchangers , 2005 .

[8]  Dong Won Lee,et al.  Heat transfer characteristics of the ice slurry at melting process in a tube flow , 2006 .

[9]  B. Niezgoda-Żelasko,et al.  Heat transfer of ice slurry flows in tubes , 2006 .

[10]  Hiroyuki Kumano,et al.  Study on latent heat of fusion of ice in aqueous solutions , 2007 .

[11]  Savvas A. Tassou,et al.  Present and future applications of ice slurries , 2005 .

[12]  Slurry ice based cooling systems , 2000 .

[13]  Michael Kauffeld,et al.  From physical properties of ice slurries to industrial ice slurry applications , 2005 .

[14]  T. A. Cowell,et al.  Heat transfer and pressure drop characteristics of flat tube and louvered plate fin surfaces , 1988 .

[15]  K. A. Fikiin,et al.  Individual quick freezing of foods by hydrofluidisation and pumpable ice slurries , 2000 .